Unix/Linux Go Back    

RedHat 9 (Linux i386) - man page for gimprc-1.2 (redhat section 5)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

GIMPRC(5)				GIMP Manual Pages				GIMPRC(5)

       gimprc - gimp configuration file

       The  gimprc file is a configuation file read by the gimp when it starts up.  There are two
       of  these:  one	system-wide  one  stored   in	/etc/gimp/1.2/gimprc   and   a	 per-user
       $HOME/.gimp-1.2/gimprc which may override system settings.

       Comments are introduced by a hash sign (#), and continue until the end of the line.  Blank
       lines are ignored.

       The gimprc file associates values with properties.  These properties may be set	by  lisp-
       like assignments of the form:

	      (property-name   value)


		 is one of the property names described below.

       value	 is the value the property is to be set to.

       Either spaces or tabs may be used to separate the name from the value.

       The values have an associated type, described below:

       STRING A  sequence  of characters surrounded by double-quotes (").  A backslash (\) may be
	      used to escape either double-quote or itself to generate a literal double-quote  or
	      a literal backslash.

       PATH   Same as STRING, but path-expansion (see below) is also performed.

       DOUBLE An  optional minus sign (-) followed by zero or more decimal digits, and optionally
	      a decimal-point (.) followed by zero or more decimal digits.

       FLOAT  Same as DOUBLE.

       INT    Same as DOUBLE, except the value is rounded to the next lowest integer.

	      One of true, on, yes, false, off, or no.	Alternatively, the empty string is inter-
	      preted to mean true.

	      Same as two INTs separated by whitespace.

	      An  INT followed by a size specifier.  A size specifier is one of m, M, k, K, b, or
	      B.  The size specified may be omitted, in which case it defaults to k.

	      One of rgb, grey, or gray.

	      Four whitespace separated INTs, giving the number of shades of red, green, blue and
	      grey (respectively) in the color cube.

	      One  of  none, tiny, small, medium, large or huge, or an INT.  tiny is 24x24, small
	      is 32x32, medium is 48x48, large is 64x64 and huge is 128x128.

       UNIT   One of inches, millimeters, picas, or points or the identifier of one of the  units
	      you have defined in your user units database.

       Valid properties and their types:

       temp-path PATH
	      Set  the	temporary  storage directory. Files will appear here during the course of
	      running the gimp.  Most files will disappear when the gimp exits,  but  some  files
	      are  likely  to remain, such as working palette files, so it is best if this direc-
	      tory not be one that is shared by other users or is cleared on machine reboot  such
	      as /tmp.

       swap-path PATH
	      Set  the	swap  file location. The gimp uses a tile based memory allocation scheme.
	      The swap file is used to quickly and easily swap tiles out to disk and back in.  Be
	      aware  that  the swap file can easily get very large if the gimp is used with large
	      images.  Also, things can get horribly slow if the swap file is created on a direc-
	      tory  that is mounted over NFS.  For these reasons, it may be desirable to put your
	      swap file in "/tmp".

       brush-path PATH
	      Set the brush search path. This is a colon-separated  list  of  directories  to  be
	      searched for brushes.

       pattern-path PATH
	      Set  the	pattern search path.  This is a colon-separated list of directories to be
	      searched for patterns.

       plug-in-path PATH
	      Set the plug-in search path. This is a colon-separated list  of  directories  which
	      will be scanned at startup to register new plugins.

       palette-path PATH
	      Set  the	palette search path.  This is a colon-separated list of directories to be
	      searched for palettes.

       gradient-path PATH
	      Set the gradient search path.  This is a colon-separated list of directories to  be
	      searched for gradients.

       module-path PATH
	      Set  the	module	search	path. This is a colon-separated list of directories which
	      will be scanned at startup for modules to be loaded.

       default-brush STRING
	      Specify a default brush.	This doesn't actually do anything  any	more,  since  the
	      default brush is set as part of the saved device status.

       default-pattern STRING
	      Specify  a  default  pattern.  The pattern is searched for in the specified pattern

       default-palette STRING
	      Specify a default palette.  The palette is searched for in  the  specified  palette

       default-gradient STRING
	      Specify  a default gradient. The gradient is searched for in the specified gradient

       gamma-correction DOUBLE
	      Set the gamma correction value for the display.  1.0 corresponds to no  gamma  cor-
	      rection.	 For most displays, gamma correction should be set to between 2.0 and 2.6
	      Run the utility "gamma_correct" to determine appropriate values for  your  display.
	      XXX  is  this valid info?  One important item to keep in mind: Many images that you
	      might get from outside sources will in all likelihood already  be  gamma-corrected.
	      In  these  cases,  the  image will look washed-out if the gimp has gamma-correction
	      turned on.  If you are going to work with images of this sort, turn  gamma  correc-
	      tion off by setting the value to 1.0.

       color-cube COLORCUBE
	      Set  the	displays color cube.  No longer used in gimp-1.2.x since the introduction
	      of GdkRgb.

       install-colormap BOOLEAN
	      Install a private colormap by default - not actually used anymore since the  intro-
	      duction of GdkRgb.

       tile-cache-size MEMSIZE
	      The  tile  cache	is used to make sure the gimp doesn't thrash tiles between memory
	      and disk. Setting this value higher will cause the gimp to use less swap space, but
	      will  also  cause  the  gimp  to	use more memory. Conversely, a smaller cache size
	      causes the gimp to use more swap space and less memory.  Note: the gimp will  still
	      run  even if `tile-cache-size' is set to 0. The actual size can contain a suffix of
	      'm', 'M', size as being specified in megabytes, kilobytes and  bytes  respectively.
	      If no suffix is specified the size defaults to being specified in kilobytes.

       marching-ants-speed INT
	      Speed  of  marching  ants  in the selection outline.  This value is in milliseconds
	      (less time indicates faster marching).

       last-opened-size INT
	      How many recently opened image filenames to keep on the File menu.

       undo-levels INT
	      Set the number of operations kept on the undo stack.

       transparency-type INT
	      Set the manner in which transparency is displayed in images.  Transparency type can
	      be one of 0 - Light Checks, 1 - Mid-Tone Checks, 2 - Dark Checks, 3 - White Only, 4
	      - Gray Only, or 5 - Black Only.

       transparency-size INT
	      Check size can be one of 0 - Small, 1 - Medium, or 2 - Large

       perfect-mouse BOOLEAN
	      If set to true, the X server is queried for the mouse's current  position  on  each
	      motion  event,  rather than relying on the position hint.  This means painting with
	      large brushes should be more accurate, but it may be slower.  Perversely, on some X
	      servers turning on this option results in faster painting.

       colormap-cycling BOOLEAN
	      Specify that marching ants for selected regions will be drawn with colormap cycling
	      as oposed to redrawing with different stipple masks.   This  color  cycling  option
	      works only with 8-bit displays.

       default-threshold INT
	      Tools  such as fuzzy-select and bucket fill find regions based on a seed-fill algo-
	      rithm.  The seed fill starts at the intially selected pixel and progresses  in  all
	      directions  until  the  difference  of pixel intensity from the original is greater
	      than a specified threshold.  This value represents the default threshold.

       stingy-memory-use BOOLEAN
	      There is always a tradeoff between memory usage and speed.  In most cases, the GIMP
	      opts  for speed over memory.  However, if memory is a big issue, set stingy-memory-

       allow-resize-windows BOOLEAN
	      When zooming into and out of images, this option enables the automatic resizing  of

       dont-allow-resize-windows BOOLEAN
	      Negated version of allow-resize-windows.

       cursor-updating BOOLEAN
	      Context-dependent  cursors  are  cool.  They are enabled by default.  However, they
	      require overhead that you may want to do without.

       no-cursor-updating BOOLEAN
	      Negated version of cursor-updating.

       preview-size PREVIEWSIZE
	      Set the layer preview size.

       show-rulers BOOLEAN
	      Set the ruler visibility. The default behavior is for rulers to be  on.	This  can
	      also be toggled with the View->Toggle Rulers command or shift+control+r.

       dont-show-rulers BOOLEAN
	      Negated version of show-rulers.

       show-statusbar BOOLEAN
	      Controlling  statusbar  visibility.  The default behavior is to show the statusbar.
	      This can also be toggled with the  View->Toggle  Statusbar  command  or  shift+con-

       dont-show-statusbar BOOLEAN
	      Negated version of show-statusbar.

       auto-save BOOLEAN
	      Auto  saving  is not yet implemented! Nothing will be auto-saved, no matter how you
	      set this.

       dont-auto-save BOOLEAN
	      Negated version of auto-save.

       cubic-interpolation BOOLEAN
	      Set the level of interpolation.  If set, this option  enables  cubic  interpolation
	      when scaling or transforming.  By default, GIMP uses linear interpolation, which is
	      faster, but has poorer quality.

       confirm-on-close BOOLEAN
	      Ask for confirmation before closing an image without saving. This is the default.

       dont-confirm-on-close BOOLEAN
	      Negated version of confirm-on-close.

       save-session-info BOOLEAN
	      Remember the positions and sizes of the main dialogs and asks  your  window-manager
	      to place them there again the next time you use the GIMP.

       dont-save-session-info BOOLEAN
	      Negated version of save-session-info.

       save-device-status BOOLEAN
	      Remember the current tool, pattern, color, and brush across GIMP sessions.

       dont-save-device-status BOOLEAN
	      Negated version of save-device-status.

       always-restore-session BOOLEAN
	      Let GIMP try to restore your last saved session.

       show-tips BOOLEAN
	      Set to display a handy GIMP tip on startup.

       dont-show-tips BOOLEAN
	      Negated version of show-tips.

       show-tool-tips BOOLEAN
	      Set to display tooltips in the toolbox.

       dont-show-tool-tips BOOLEAN
	      Negated version of show-tool-tips.

       default-image-size POSITION
	      Set the default image size in the File/New dialog.

       default-image-type IMAGETYPE
	      Set the default image type in the File/New dialog.

       default-units UNIT
	      Set  the default units for new images and for the File/New dialog.  This units will
	      be used for coordinate display when not in dot-for-dot mode. The default units  can
	      be  one  of  inches  , millimeters, points or picas or the identifier of one of the
	      units defined in your user units database. The default is inches.

       default-xresolution FLOAT
	      Set the default horizontal resolution for new images and for the	File/New  dialog.
	      This value is always in dpi (dots per inch).

       default-yresolution FLOAT
	      Set  the	default  vertical  resolution for new images and for the File/New dialog.
	      This value is always in dpi (dots per inch).

       default-resolution-units UNIT
	      Set the units for the display of the default resolution in the File/New dialog. The
	      default  resolution units can be one of inches, millimeters, points or picas or the
	      identifier of one of the units defined in your user unit database. The  default  is

       monitor-xresolution FLOAT
	      Set the monitor's horizontal resolution, in dots per inch.  If set to 0, forces the
	      X server to be queried for both horizontal and vertical resolution information.

       monitor-yresolution FLOAT
	      Set the monitor's vertical resolution, in dots per inch.	If set to 0, forces the X
	      server to be queried for both horizontal and vertical resolution information.

       num-processors INT
	      On  multiprocessor  machines,  if GIMP has been compiled with --enable-mp this sets
	      how many processors GIMP should use simultaneously.

       image-title-format STRING
	      Set the text to appear in image window titles.  Certain % character  sequences  are
	      recognised and expanded as follows:

	      %%  literal percent sign
	      %f  bare filename, or "Untitled"
	      %F  full path to file, or "Untitled"
	      %p  PDB image id
	      %i  view instance number
	      %t  image type (RGB, indexed, greyscale)
	      %z  zoom factor as a percentage
	      %s  source scale factor
	      %d  destination scale factor
	      %Dx  expands  to x if the image is dirty, the empty string otherwise.  The x can be
	      any character, eg %D*.

	      The default format string is "%f-%p.%i (%t)".

       Strings of type PATH are expanded in a manner similar to bash(1).  Specifically: tilde (~)
       is expanded to the user's home directory, and ${variable} is expanded to the current value
       of the variable.  Note that the bash feature of being able to refer to other  user's  home
       directories by writing ~userid/ is not valid in this file.

       The  only  variable  initially  defined	is gimp_dir , which is set to either the interned
       value .gimp-1.2 or the environment variable GIMP_DIRECTORY.  If the path in GIMP_DIRECTORY
       is  relative,  it is considered relative to your home directory.  The same variable expan-
       sion syntax can be used to refer to environment variables.  New variables may  be  defined
       so long as their name does not shadow one of the property names given in the previous sec-
       tion.  Variables are set using the following syntax:

	      (variable-name   PATH)

       Note that the right hand side of this assignment is itself path	expanded  before  setting
       the value of the variable.

       Typically, the system-wide gimprc file will set a few convenience variables:

       prefix The installation prefix for this build, /usr.

	      The path to architecture-specific executables, /usr.

	      Path to sharable data, /usr/share/gimp/1.2.

	      Base for paths to architecture-specific plugins and modules, /usr/lib/gimp/1.2.

	      System-wide configuration file

	      Per-user configuration file

       gimp(1), gimptool(1), gimp-remote(1)

Version 1.2.3				   14 Oct 2000					GIMPRC(5)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 04:47 PM.