Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages

RedHat 9 (Linux i386) - man page for qsocket (redhat section 3qt)

QSocket(3qt)									     QSocket(3qt)

NAME
       QSocket - Buffered TCP connection

SYNOPSIS
       #include <qsocket.h>

       Inherits QObject and QIODevice.

   Public Members
       enum Error { ErrConnectionRefused, ErrHostNotFound, ErrSocketRead }
       QSocket ( QObject * parent = 0, const char * name = 0 )
       virtual ~QSocket ()
       enum State { Idle, HostLookup, Connecting, Connected, Closing, Connection = Connected }
       State state () const
       int socket () const
       virtual void setSocket ( int socket )
       QSocketDevice * socketDevice ()
       virtual void setSocketDevice ( QSocketDevice * device )
       virtual void connectToHost ( const QString & host, Q_UINT16 port )
       QString peerName () const
       virtual bool open ( int m )
       virtual void close ()
       virtual void flush ()
       virtual Offset size () const
       virtual Offset at () const
       virtual bool at ( Offset index )
       virtual bool atEnd () const
       Q_ULONG bytesAvailable () const
       Q_ULONG waitForMore ( int msecs, bool * timeout ) const
       Q_ULONG waitForMore ( int msecs ) const
       Q_ULONG bytesToWrite () const
       void clearPendingData ()
       virtual Q_LONG readBlock ( char * data, Q_ULONG maxlen )
       virtual Q_LONG writeBlock ( const char * data, Q_ULONG len )
       virtual int getch ()
       virtual int putch ( int ch )
       virtual int ungetch ( int ch )
       bool canReadLine () const
       virtual QString readLine ()
       Q_UINT16 port () const
       Q_UINT16 peerPort () const
       QHostAddress address () const
       QHostAddress peerAddress () const

   Signals
       void hostFound ()
       void connected ()
       void connectionClosed ()
       void delayedCloseFinished ()
       void readyRead ()
       void bytesWritten ( int nbytes )
       void error ( int )

DESCRIPTION
       The QSocket class provides a buffered TCP connection.

       It provides a totally non-blocking QIODevice, and modifies and extends the API of
       QIODevice with socket-specific code.

       The functions you're likely to call most are connectToHost(), bytesAvailable(),
       canReadLine() and the ones it inherits from QIODevice.

       connectToHost() is the most-used function. As its name implies, it opens a connection to a
       named host.

       Most network protocols are either packet-oriented or line-oriented. canReadLine()
       indicates whether a connection contains an entire unread line or not, and bytesAvailable()
       returns the number of bytes available for reading.

       The signals error(), connected(), readyRead() and connectionClosed() inform you of the
       progress of the connection. There are also some less commonly used signals. hostFound() is
       emitted when connectToHost() has finished its DNS lookup and is starting its TCP
       connection. delayedCloseFinished() is emitted when close() succeeds. bytesWritten() is
       emitted when QSocket moves data from its "to be written" queue into the TCP
       implementation.

       There are several access functions for the socket: state() returns whether the object is
       idle, is doing a DNS lookup, is connecting, has an operational connection, etc. address()
       and port() return the IP address and port used for the connection. The peerAddress() and
       peerPort() functions return the IP address and port used by the peer, and peerName()
       returns the name of the peer (normally the name that was passed to connectToHost()).
       socket() returns a pointer to the QSocketDevice used for this socket.

       QSocket inherits QIODevice, and reimplements some functions. In general, you can treat it
       as a QIODevice for writing, and mostly also for reading. The match isn't perfect, since
       the QIODevice API is designed for devices that are controlled by the same machine, and an
       asynchronous peer-to-peer network connection isn't quite like that. For example, there is
       nothing that matches QIODevice::size() exactly. The documentation for open(), close(),
       flush(), size(), at(), atEnd(), readBlock(), writeBlock(), getch(), putch(), ungetch() and
       readLine() describes the differences in detail.

       See also QSocketDevice, QHostAddress, QSocketNotifier, and Input/Output and Networking.

   Member Type Documentation
QSocket::Error
       This enum specifies the possible errors:

       QSocket::ErrConnectionRefused - if the connection was refused

       QSocket::ErrHostNotFound - if the host was not found

       QSocket::ErrSocketRead - if a read from the socket failed

QSocket::State
       This enum defines the connection states:

       QSocket::Idle - if there is no connection

       QSocket::HostLookup - during a DNS lookup

       QSocket::Connecting - during TCP connection establishment

       QSocket::Connected - when there is an operational connection

       QSocket::Closing - if the socket is closing down, but is not yet closed.

MEMBER FUNCTION DOCUMENTATION
QSocket::QSocket ( QObject * parent = 0, const char * name = 0 )
       Creates a QSocket object in QSocket::Idle state.

       The parent and name arguments are passed on to the QObject constructor.

QSocket::~QSocket () [virtual]
       Destroys the socket. Closes the connection if necessary.

       See also close().

QHostAddress QSocket::address () const
       Returns the host address of this socket. (This is normally the main IP address of the
       host, but can be e.g. 127.0.0.1 for connections to localhost.)

Offset QSocket::at () const [virtual]
       Returns the current read index. Since QSocket is a sequential device, the current read
       index is always zero.

       Reimplemented from QIODevice.

bool QSocket::at ( Offset index ) [virtual]
       This is an overloaded member function, provided for convenience. It behaves essentially
       like the above function.

       Moves the read index forward to index and returns TRUE if the operation was successful;
       otherwise returns FALSE. Moving the index forward means skipping incoming data.

       Reimplemented from QIODevice.

bool QSocket::atEnd () const [virtual]
       Returns TRUE if there is no more data to read; otherwise returns FALSE.

       Reimplemented from QIODevice.

Q_ULONG QSocket::bytesAvailable () const
       Returns the number of incoming bytes that can be read, i.e. the size of the input buffer.
       Equivalent to size().

       See also bytesToWrite().

       Example: network/networkprotocol/nntp.cpp.

Q_ULONG QSocket::bytesToWrite () const
       Returns the number of bytes that are waiting to be written, i.e. the size of the output
       buffer.

       See also bytesAvailable() and clearPendingData().

void QSocket::bytesWritten ( int nbytes ) [signal]
       This signal is emitted when data has been written to the network. The nbytes parameter
       specifies how many bytes were written.

       The bytesToWrite() function is often used in the same context; it indicates how many
       buffered bytes there are left to write.

       See also writeBlock() and bytesToWrite().

bool QSocket::canReadLine () const
       Returns TRUE if it's possible to read an entire line of text from this socket at this
       time; otherwise returns FALSE.

       Note that if the peer closes the connection unexpectedly, this function returns FALSE.
       This means that loops such as this won't work:

	       while( !socket->canReadLine() ) // WRONG.
		   ...

       See also readLine().

       Examples:

void QSocket::clearPendingData ()
       Deletes the data that is waiting to be written. This is

       See also bytesToWrite() and close().

void QSocket::close () [virtual]
       Closes the socket.

       The read buffer is cleared.

       If the output buffer is empty, the state is set to QSocket::Idle and the connection is
       terminated immediately. If the output buffer still contains data to be written, QSocket
       goes into the QSocket::Closing state and the rest of the data will be written. When all of
       the outgoing data have been written, the state is set to QSocket::Idle and the connection
       is terminated. At this point, the delayedCloseFinished() signal is emitted.

       If you don't want that the data of the output buffer is written, call clearPendingData()
       before you call close().

       See also state(), bytesToWrite(), and clearPendingData().

       Examples:

       Reimplemented from QIODevice.

void QSocket::connectToHost ( const QString & host, Q_UINT16 port ) [virtual]
       Attempts to make a connection to host on the specified port and return immediately.

       Any connection or pending connection is closed immediately, and QSocket goes into the
       HostLookup state. When the lookup succeeds, it emits hostFound(), starts a TCP connection
       and goes into the Connecting state. Finally, when the connection succeeds, it emits
       connected() and goes into the Connected state. If there is an error at any point, it emits
       error().

       host may be an IP address in string form, or it may be a DNS name. QSocket will do a
       normal DNS lookup if required. Note that port is in native byte order, unlike some other
       libraries.

       See also state().

       Examples:

void QSocket::connected () [signal]
       This signal is emitted after connectToHost() has been called and a connection has been
       successfully established.

       See also connectToHost() and connectionClosed().

       Examples:

void QSocket::connectionClosed () [signal]
       This signal is emitted when the other end has closed the connection. The read buffers may
       contain buffered input data which you can read after the connection was closed.

       See also connectToHost() and close().

       Examples:

void QSocket::delayedCloseFinished () [signal]
       This signal is emitted when a delayed close is finished.

       If you call close() and there is buffered output data to be written, QSocket goes into the
       QSocket::Closing state and returns immediately. It will then keep writing to the socket
       until all the data has been written. Then, the delayedCloseFinished() signal is emitted.

       See also close().

       Examples:

void QSocket::error ( int ) [signal]
       This signal is emitted after an error occurred. The parameter is the Error value.

       Examples:

void QSocket::flush () [virtual]
       Implementation of the abstract virtual QIODevice::flush() function.

       Reimplemented from QIODevice.

int QSocket::getch () [virtual]
       Reads a single byte/character from the internal read buffer. Returns the byte/character
       read, or -1 if there is nothing to be read.

       See also bytesAvailable() and putch().

       Reimplemented from QIODevice.

void QSocket::hostFound () [signal]
       This signal is emitted after connectToHost() has been called and the host lookup has
       succeeded.

       See also connected().

       Example: network/networkprotocol/nntp.cpp.

bool QSocket::open ( int m ) [virtual]
       Opens the socket using the specified QIODevice file mode m. This function is called
       automatically when needed and you should not call it yourself.

       See also close().

       Reimplemented from QIODevice.

QHostAddress QSocket::peerAddress () const
       Returns the host address as resolved from the name specified to the connectToHost()
       function.

QString QSocket::peerName () const
       Returns the host name as specified to the connectToHost() function. An empty string is
       returned if none has been set.

       Example: network/mail/smtp.cpp.

Q_UINT16 QSocket::peerPort () const
       Returns the peer's host port number, normally as specified to the connectToHost()
       function. If none has been set, this function returns 0.

       Note that Qt always uses native byte order, i.e. 67 is 67 in Qt; there is no need to call
       htons().

Q_UINT16 QSocket::port () const
       Returns the host port number of this socket, in native byte order.

int QSocket::putch ( int ch ) [virtual]
       Writes the character ch to the output buffer.

       Returns ch, or -1 if an error occurred.

       See also getch().

       Reimplemented from QIODevice.

Q_LONG QSocket::readBlock ( char * data, Q_ULONG maxlen ) [virtual]
       Reads maxlen bytes from the socket into data and returns the number of bytes read. Returns
       -1 if an error occurred.

       Example: network/networkprotocol/nntp.cpp.

       Reimplemented from QIODevice.

QString QSocket::readLine () [virtual]
       Returns a line of text including a terminating newline character (\n). Returns "" if
       canReadLine() returns FALSE.

       See also canReadLine().

       Examples:

void QSocket::readyRead () [signal]
       This signal is emitted every time there is new incoming data.

       Bear in mind that new incoming data is only reported once; if you do not read all the
       data, this class buffers the data and you can read it later, but no signal is emitted
       unless new data arrives. A good practice is to read all data in the slot connected to this
       signal unless you are sure that you need to receive more data to be able to process it.

       See also readBlock(), readLine(), and bytesAvailable().

       Examples:

void QSocket::setSocket ( int socket ) [virtual]
       Sets the socket to use socket and the state() to Connected. The socket must already be
       connected.

       This allows us to use the QSocket class as a wrapper for other socket types (e.g. Unix
       Domain Sockets).

       Example: network/httpd/httpd.cpp.

void QSocket::setSocketDevice ( QSocketDevice * device ) [virtual]
       Sets the internal socket device to device. Passing a device of 0 will cause the internal
       socket device to be used. Any existing connection will be disconnected before using the
       new device.

       The new device should not be connected before being associated with a QSocket; after
       setting the socket call connectToHost() to make the connection.

       This function is useful if you need to subclass QSocketDevice and want to use the QSocket
       API, for example, to implement Unix domain sockets.

Offset QSocket::size () const [virtual]
       Returns the number of incoming bytes that can be read right now (like bytesAvailable()).

       Reimplemented from QIODevice.

int QSocket::socket () const
       Returns the socket number, or -1 if there is no socket at the moment.

QSocketDevice * QSocket::socketDevice ()
       Returns a pointer to the internal socket device.

       There is normally no need to manipulate the socket device directly since this class does
       the necessary setup for most applications.

State QSocket::state () const
       Returns the current state of the socket connection.

       See also QSocket::State.

       Examples:

int QSocket::ungetch ( int ch ) [virtual]
       This implementation of the virtual function QIODevice::ungetch() prepends the character ch
       to the read buffer so that the next read returns this character as the first character of
       the output.

       Reimplemented from QIODevice.

Q_ULONG QSocket::waitForMore ( int msecs, bool * timeout ) const
       Wait up to msecs milliseconds for more data to be available.

       If msecs is -1 the call will block indefinitely.

       Returns the number of bytes available.

       If timeout is non-null and no error occurred (i.e. it does not return -1): this function
       sets *timeout to TRUE, if the reason for returning was that the timeout was reached;
       otherwise it sets *timeout to FALSE. This is useful to find out if the peer closed the
       connection.

       Warning: This is a blocking call and should be avoided in event driven applications.

       See also bytesAvailable().

Q_ULONG QSocket::waitForMore ( int msecs ) const
       This is an overloaded member function, provided for convenience. It behaves essentially
       like the above function.

Q_LONG QSocket::writeBlock ( const char * data, Q_ULONG len ) [virtual]
       Writes len bytes to the socket from data and returns the number of bytes written. Returns
       -1 if an error occurred.

       Example: network/networkprotocol/nntp.cpp.

       Reimplemented from QIODevice.

SEE ALSO
       http://doc.trolltech.com/qsocket.html http://www.trolltech.com/faq/tech.html

COPYRIGHT
       Copyright 1992-2001 Trolltech AS, http://www.trolltech.com.  See the license file included
       in the distribution for a complete license statement.

AUTHOR
       Generated automatically from the source code.

BUGS
       If you find a bug in Qt, please report it as described in
       http://doc.trolltech.com/bughowto.html.	Good bug reports help us to help you. Thank you.

       The definitive Qt documentation is provided in HTML format; it is located at
       $QTDIR/doc/html and can be read using Qt Assistant or with a web browser. This man page is
       provided as a convenience for those users who prefer man pages, although this format is
       not officially supported by Trolltech.

       If you find errors in this manual page, please report them to qt-bugs@trolltech.com.
       Please include the name of the manual page (qsocket.3qt) and the Qt version (3.1.1).

Trolltech AS				 9 December 2002			     QSocket(3qt)


All times are GMT -4. The time now is 03:50 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
UNIX.COM Login
Username:
Password:  
Show Password