Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages

RedHat 9 (Linux i386) - man page for extutils::liblist (redhat section 3pm)

ExtUtils::Liblist(3pm)		 Perl Programmers Reference Guide	   ExtUtils::Liblist(3pm)

NAME
       ExtUtils::Liblist - determine libraries to use and how to use them

SYNOPSIS
       "require ExtUtils::Liblist;"

       "ExtUtils::Liblist::ext($self, $potential_libs, $verbose, $need_names);"

DESCRIPTION
       This utility takes a list of libraries in the form "-llib1 -llib2 -llib3" and returns
       lines suitable for inclusion in an extension Makefile.  Extra library paths may be
       included with the form "-L/another/path" this will affect the searches for all subsequent
       libraries.

       It returns an array of four or five scalar values: EXTRALIBS, BSLOADLIBS, LDLOADLIBS,
       LD_RUN_PATH, and, optionally, a reference to the array of the filenames of actual
       libraries.  Some of these don't mean anything unless on Unix.  See the details about those
       platform specifics below.  The list of the filenames is returned only if $need_names argu-
       ment is true.

       Dependent libraries can be linked in one of three ways:

       o For static extensions
	 by the ld command when the perl binary is linked with the extension library. See EXTRAL-
	 IBS below.

       o For dynamic extensions at build/link time
	 by the ld command when the shared object is built/linked. See LDLOADLIBS below.

       o For dynamic extensions at load time
	 by the DynaLoader when the shared object is loaded. See BSLOADLIBS below.

       EXTRALIBS

       List of libraries that need to be linked with when linking a perl binary which includes
       this extension. Only those libraries that actually exist are included.  These are written
       to a file and used when linking perl.

       LDLOADLIBS and LD_RUN_PATH

       List of those libraries which can or must be linked into the shared library when created
       using ld. These may be static or dynamic libraries.  LD_RUN_PATH is a colon separated list
       of the directories in LDLOADLIBS. It is passed as an environment variable to the process
       that links the shared library.

       BSLOADLIBS

       List of those libraries that are needed but can be linked in dynamically at run time on
       this platform.  SunOS/Solaris does not need this because ld records the information (from
       LDLOADLIBS) into the object file.  This list is used to create a .bs (bootstrap) file.

PORTABILITY
       This module deals with a lot of system dependencies and has quite a few architecture spe-
       cific "if"s in the code.

       VMS implementation

       The version of ext() which is executed under VMS differs from the Unix-OS/2 version in
       several respects:

       o Input library and path specifications are accepted with or without the "-l" and "-L"
	 prefixes used by Unix linkers.  If neither prefix is present, a token is considered a
	 directory to search if it is in fact a directory, and a library to search for otherwise.
	 Authors who wish their extensions to be portable to Unix or OS/2 should use the Unix
	 prefixes, since the Unix-OS/2 version of ext() requires them.

       o Wherever possible, shareable images are preferred to object libraries, and object
	 libraries to plain object files.  In accordance with VMS naming conventions, ext() looks
	 for files named libshr and librtl; it also looks for liblib and liblib to accommodate
	 Unix conventions used in some ported software.

       o For each library that is found, an appropriate directive for a linker options file is
	 generated.  The return values are space-separated strings of these directives, rather
	 than elements used on the linker command line.

       o LDLOADLIBS contains both the libraries found based on $potential_libs and the CRTLs, if
	 any, specified in Config.pm.  EXTRALIBS contains just those libraries found based on
	 $potential_libs.  BSLOADLIBS and LD_RUN_PATH are always empty.

       In addition, an attempt is made to recognize several common Unix library names, and filter
       them out or convert them to their VMS equivalents, as appropriate.

       In general, the VMS version of ext() should properly handle input from extensions origi-
       nally designed for a Unix or VMS environment.  If you encounter problems, or discover
       cases where the search could be improved, please let us know.

       Win32 implementation

       The version of ext() which is executed under Win32 differs from the Unix-OS/2 version in
       several respects:

       o If $potential_libs is empty, the return value will be empty.  Otherwise, the libraries
	 specified by $Config{perllibs} (see Config.pm) will be appended to the list of $poten-
	 tial_libs.  The libraries will be searched for in the directories specified in $poten-
	 tial_libs, $Config{libpth}, and in "$Config{installarchlib}/CORE".  For each library
	 that is found,  a space-separated list of fully qualified library pathnames is gener-
	 ated.

       o Input library and path specifications are accepted with or without the "-l" and "-L"
	 prefixes used by Unix linkers.

	 An entry of the form "-La:\foo" specifies the "a:\foo" directory to look for the
	 libraries that follow.

	 An entry of the form "-lfoo" specifies the library "foo", which may be spelled differ-
	 ently depending on what kind of compiler you are using.  If you are using GCC, it gets
	 translated to "libfoo.a", but for other win32 compilers, it becomes "foo.lib".  If no
	 files are found by those translated names, one more attempt is made to find them using
	 either "foo.a" or "libfoo.lib", depending on whether GCC or some other win32 compiler is
	 being used, respectively.

	 If neither the "-L" or "-l" prefix is present in an entry, the entry is considered a
	 directory to search if it is in fact a directory, and a library to search for otherwise.
	 The $Config{lib_ext} suffix will be appended to any entries that are not directories and
	 don't already have the suffix.

	 Note that the "-L" and "-l" prefixes are not required, but authors who wish their exten-
	 sions to be portable to Unix or OS/2 should use the prefixes, since the Unix-OS/2 ver-
	 sion of ext() requires them.

       o Entries cannot be plain object files, as many Win32 compilers will not handle object
	 files in the place of libraries.

       o Entries in $potential_libs beginning with a colon and followed by alphanumeric charac-
	 ters are treated as flags.  Unknown flags will be ignored.

	 An entry that matches "/:nodefault/i" disables the appending of default libraries found
	 in $Config{perllibs} (this should be only needed very rarely).

	 An entry that matches "/:nosearch/i" disables all searching for the libraries specified
	 after it.  Translation of "-Lfoo" and "-lfoo" still happens as appropriate (depending on
	 compiler being used, as reflected by $Config{cc}), but the entries are not verified to
	 be valid files or directories.

	 An entry that matches "/:search/i" reenables searching for the libraries specified after
	 it.  You can put it at the end to enable searching for default libraries specified by
	 $Config{perllibs}.

       o The libraries specified may be a mixture of static libraries and import libraries (to
	 link with DLLs).  Since both kinds are used pretty transparently on the Win32 platform,
	 we do not attempt to distinguish between them.

       o LDLOADLIBS and EXTRALIBS are always identical under Win32, and BSLOADLIBS and
	 LD_RUN_PATH are always empty (this may change in future).

       o You must make sure that any paths and path components are properly surrounded with dou-
	 ble-quotes if they contain spaces. For example, $potential_libs could be (literally):

		 "-Lc:\Program Files\vc\lib" msvcrt.lib "la test\foo bar.lib"

	 Note how the first and last entries are protected by quotes in order to protect the spa-
	 ces.

       o Since this module is most often used only indirectly from extension "Makefile.PL" files,
	 here is an example "Makefile.PL" entry to add a library to the build process for an
	 extension:

		 LIBS => ['-lgl']

	 When using GCC, that entry specifies that MakeMaker should first look for "libgl.a"
	 (followed by "gl.a") in all the locations specified by $Config{libpth}.

	 When using a compiler other than GCC, the above entry will search for "gl.lib" (followed
	 by "libgl.lib").

	 If the library happens to be in a location not in $Config{libpth}, you need:

		 LIBS => ['-Lc:\gllibs -lgl']

	 Here is a less often used example:

		 LIBS => ['-lgl', ':nosearch -Ld:\mesalibs -lmesa -luser32']

	 This specifies a search for library "gl" as before.  If that search fails to find the
	 library, it looks at the next item in the list. The ":nosearch" flag will prevent
	 searching for the libraries that follow, so it simply returns the value as "-Ld:\mesal-
	 ibs -lmesa -luser32", since GCC can use that value as is with its linker.

	 When using the Visual C compiler, the second item is returned as "-libpath:d:\mesalibs
	 mesa.lib user32.lib".

	 When using the Borland compiler, the second item is returned as "-Ld:\mesalibs mesa.lib
	 user32.lib", and MakeMaker takes care of moving the "-Ld:\mesalibs" to the correct place
	 in the linker command line.

SEE ALSO
       ExtUtils::MakeMaker

perl v5.8.0				    2002-06-01			   ExtUtils::Liblist(3pm)


All times are GMT -4. The time now is 09:54 PM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
UNIX.COM Login
Username:
Password:  
Show Password