Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages

RedHat 9 (Linux i386) - man page for shar (redhat section 1)

SHAR(1) 				       General Commands Manual					      SHAR(1)

NAME
shar - create shell archives
SYNOPSIS
shar [ options ] file ... shar -S [ options ]
DESCRIPTION
Shar creates "shell archives" (or shar files) which are in text format and can be mailed. These files may be unpacked later by executing them with /bin/sh. The resulting archive is sent to standard out unless the -o option is given. A wide range of features provide extensive flexibility in manufacturing shars and in speci- fying shar "smartness". Archives may be "vanilla" or comprehensive.
OPTIONS
Options have a one letter version starting with - or a long version starting with --. The exception is --help, --version, --no-i18n and --print-text-domain-dir which does not have short versions. Mandatory argu- ments to long options are mandatory for short options too. Options can be given in any order. Some options depend on each other: The -o option is required if the -l or -L option is used. The -n option is required if the -a option is used. See -V below. Giving feedback: --help Print a help summary on standard output, then immediately exits. --version Print the version number of the program on standard output, then immediately exits. -q --quiet --silent Do not output verbose messages locally when producing the archive. Selecting files: -p --intermix-type Allow positional parameter options. The options -B, -T, -z and -Z may be embedded, and files to the right of the option will be processed in the specified mode. -S --stdin-file-list Read list of files to be packed from the standard input rather than from the command line. Input must be in a form similar to that generated by the find command, one filename per line. This switch is especially useful when the command line will not hold the list of files to be packed. For example: find . -type f -print | sort | shar -S -Z -L50 -o /tmp/big If -p is specified on the command line, then the options -B, -T, -z and -Z may be included in the stan- dard input (on a line separate from filenames). The maximum number of lines of standard input, file names and options, may not exceed 1024. Splitting output: -o XXX --output-prefix=XXX Save the archive to files XXX.01 thru XXX.nn instead of sending it to standard out. Must be used when the -l or the -L switches are used. -l XX --whole-size-limit=XX Limit the output file size to XXk bytes but don't split input files. -L XX --split-size-limit=XX Limit output file size to XXk bytes and split files if necessary. The archive parts created with this option must be unpacked in correct order. Controlling the shar headers: -n name --archive-name=name Name of archive to be included in the header of the shar files. See the -a switch. -s who@where --submitter=who@where Override automatically determined submitter name. -a --net-headers Allows automatic generation of headers: Submitted-by: who@where Archive-name: <name>/part## The <name> must be given with the -n switch. If name includes a '/' "/part" isn't used. Thus: -n xyzzy produces: xyzzy/part01 xyzzy/part02 -n xyzzy/patch produces: xyzzy/patch01 xyzzy/patch02 -n xyzzy/patch01. produces: xyzzy/patch01.01 xyzzy/patch01.02 The who@where can be explicitly stated with the -s switch if the default isn't appropriate. Who@where is essentially built as `whoami`@`uname`. -c --cut-mark Start the shar with a cut line. A line saying 'Cut here' is placed at the start of each output file. Selecting how files are stocked: -M --mixed-uuencode Mixed mode. Determine if the files are text or binary and archive correctly (default). Files found to be binary are uudecoded prior to packing (USE OF UUENCODE IS NOT APPRECIATED BY MANY ON THE NET). -T --text-files Treat all files as text. -B --uuencode Treat all files as binary, use uuencode prior to packing. This increases the size of the archive. The recipient must have uudecode in order to unpack. (USE OF UUENCODE IS NOT APPRECIATED BY MANY ON THE NET). -z --gzip Gzip and uuencode all files prior to packing. The recipient must have uudecode and gzip in order to unpack (USE OF UUENCODE AND GZIP IS NOT APPRECIATED BY MANY ON THE NET). -g LEVEL --level-for-gzip=LEVEL When doing compression, use '-LEVEL' as a parameter to gzip. Default is 9. The -g option turns on the -z option by default. -Z --compress Compress and uuencode all files prior to packing. The recipient must have uudecode and compress in order to unpack (USE OF UUENCODE AND COMPRESS IS NOT APPRECIATED BY MANY ON THE NET). Option -C is synonymous to -Z, but is being deprecated. -b BITS --bits-per-code=BITS When doing compression, use '-bBITS' as a parameter to compress. The -B option turns on the -Z option by default. Default value is 12. Protecting against transmission errors: -w --no-character-count Do NOT check each file with 'wc -c' after unpack. The default is to check. -D --no-md5-digest Do NOT use 'md5sum' digest to verify the unpacked files. The default is to check. -F --force-prefix Forces the prefix character (normally 'X' unless the parameter to the -d option starts with 'X') to be prepended to every line even if not required. This option may slightly increase the size of the ar- chive, especially if -B or -Z is used. -d XXX --here-delimiter=XXX Use XXX to delimit the files in the shar instead of SHAR_EOF. This is for those who want to personal- ize their shar files. Producing different kinds of shars: -V --vanilla-operation Produce "vanilla" shars which rely only upon the existence of sed and echo in the unsharing environ- ment. In addition, "if test" must also be supported unless the -x option is used. The -V silently disables options offensive to the "network cop" (or "brown shirt"), but does warn you if it is speci- fied with -B, -z, -Z, -p or -M (any of which does or might require uudecode, gzip or compress in the unsharing environment). -P --no-piping Use temporary files instead of pipes in the shar file. -x --no-check-existing Overwrite existing files without checking. If neither -x nor -X is specified, the unpack will check for and not overwrite existing files when unpacking the archive. If -c is passed as a parameter to the script when unpacking: sh archive -c then existing files will be overwritten unconditionally. -X --query-user When unpacking, interactively ask the user if files should be overwritten. (DO NOT USE FOR SHARS SUB- MITTED TO THE NET). -m --no-timestamp Avoid generating 'touch' commands to restore the file modification dates when unpacking files from the archive. -Q --quiet-unshar Verbose OFF. Disables the inclusion of comments to be output when the archive is unpacked. -f --basename Restore by filename only, rather than path. This option causes only file names to be used, which is useful when building a shar from several directories, or another directory. Note that if a directory name is passed to shar, the substructure of that directory will be restored whether -f is specified or not. Internationalization: --no-i18n Do not produce internationalized shell archives, use default english messages. By default, shar pro- duces archives that will try to output messages in the unpackers preferred language (as determined by the LANG/LC_MESSAGES environmental variables) when they are unpacked. If no message file for the unpackers language is found at unpack time, messages will be in english. --print-text-domain-dir Prints the directory shar looks in to find messages files for different languages, then immediately exits.
EXAMPLES
shar *.c > cprog.shar # all C prog sources shar -Q *.[ch] > cprog.shar # non-verbose, .c and .h files shar -B -l28 -oarc.sh *.arc # all binary .arc files, into # files arc.sh.01 thru arc.sh.NN shar -f /lcl/src/u*.c > u.sh # use only the filenames
WARNINGS
No chmod or touch is ever generated for directories created when unpacking. Thus, if a directory is given to shar, the protection and modification dates of corresponding unpacked directory may not match those of the original. If a directory is passed to shar, it may be scanned more than once. Therefore, one should be careful not change the directory while shar is running. Be careful that the output file(s) are not included in the inputs or shar may loop until the disk fills up. Be particularly careful when a directory is passed to shar that the output files are not in that directory (or a subdirectory of that directory). Use of the -B, -z or -Z, and especially -M, may slow the archive process considerably, depending on the number of files. Use of -X produces shars which WILL cause problems with many unshar procedures. Use this feature only for ar- chives to be passed among agreeable parties. Certainly, -X is NOT for shell archives which are to be submit- ted to Usenet. Usage of -B, -z or -Z in net shars will cause you to be flamed off the earth. Not using -m or not using -F may also get you occasional complaints.
SEE ALSO
unshar(1)
DIAGNOSTICS
Error messages for illegal or incompatible options, for non-regular, missing or inaccessible files or for (unlikely) memory allocation failure.
AUTHORS
The shar and unshar programs is the collective work of many authors. Many people contributed by reporting problems, suggesting various improvements or submitting actual code. A list of these people is in the THANKS file in the sharutils distribution. September 10, 1995 SHAR(1)


All times are GMT -4. The time now is 03:50 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
UNIX.COM Login
Username:
Password:  
Show Password