Unix/Linux Go Back    

RedHat 9 (Linux i386) - man page for perldebug (redhat section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

PERLDEBUG(1)			 Perl Programmers Reference Guide		     PERLDEBUG(1)

       perldebug - Perl debugging

       First of all, have you tried using the -w switch?

       If you're new to the Perl debugger, you may prefer to read perldebtut, which is a tutorial
       introduction to the debugger .

The Perl Debugger
       If you invoke Perl with the -d switch, your script runs under the Perl source debugger.
       This works like an interactive Perl environment, prompting for debugger commands that let
       you examine source code, set breakpoints, get stack backtraces, change the values of vari-
       ables, etc.  This is so convenient that you often fire up the debugger all by itself just
       to test out Perl constructs interactively to see what they do.  For example:

	   $ perl -d -e 42

       In Perl, the debugger is not a separate program the way it usually is in the typical com-
       piled environment.  Instead, the -d flag tells the compiler to insert source information
       into the parse trees it's about to hand off to the interpreter.	That means your code must
       first compile correctly for the debugger to work on it.	Then when the interpreter starts
       up, it preloads a special Perl library file containing the debugger.

       The program will halt right before the first run-time executable statement (but see below
       regarding compile-time statements) and ask you to enter a debugger command.  Contrary to
       popular expectations, whenever the debugger halts and shows you a line of code, it always
       displays the line it's about to execute, rather than the one it has just executed.

       Any command not recognized by the debugger is directly executed ("eval"'d) as Perl code in
       the current package.  (The debugger uses the DB package for keeping its own state informa-

       For any text entered at the debugger prompt, leading and trailing whitespace is first
       stripped before further processing.  If a debugger command coincides with some function in
       your own program, merely precede the function with something that doesn't look like a
       debugger command, such as a leading ";" or perhaps a "+", or by wrapping it with parenthe-
       ses or braces.

       Debugger Commands

       The debugger understands the following commands:

       h	   Prints out a summary help message

       h [command] Prints out a help message for the given debugger command.

       h h	   The special argument of "h h" produces the entire help page, which is quite

		   If the output of the "h h" command (or any command, for that matter) scrolls
		   past your screen, precede the command with a leading pipe symbol so that it's
		   run through your pager, as in

		       DB> |h h

		   You may change the pager which is used via "o pager=..." command.

       p expr	   Same as "print {$DB::OUT} expr" in the current package.  In particular,
		   because this is just Perl's own "print" function, this means that nested data
		   structures and objects are not dumped, unlike with the "x" command.

		   The "DB::OUT" filehandle is opened to /dev/tty, regardless of where STDOUT may
		   be redirected to.

       x [maxdepth] expr
		   Evaluates its expression in list context and dumps out the result in a pretty-
		   printed fashion.  Nested data structures are printed out recursively, unlike
		   the real "print" function in Perl.  When dumping hashes, you'll probably pre-
		   fer 'x \%h' rather than 'x %h'.  See Dumpvalue if you'd like to do this your-

		   The output format is governed by multiple options described under "Config-
		   urable Options".

		   If the "maxdepth" is included, it must be a numeral N; the value is dumped
		   only N levels deep, as if the "dumpDepth" option had been temporarily set to

       V [pkg [vars]]
		   Display all (or some) variables in package (defaulting to "main") using a data
		   pretty-printer (hashes show their keys and values so you see what's what, con-
		   trol characters are made printable, etc.).  Make sure you don't put the type
		   specifier (like "$") there, just the symbol names, like this:

		       V DB filename line

		   Use "~pattern" and "!pattern" for positive and negative regexes.

		   This is similar to calling the "x" command on each applicable var.

       X [vars]    Same as "V currentpackage [vars]".

       y [level [vars]]
		   Display all (or some) lexical variables (mnemonic: "mY" variables) in the cur-
		   rent scope or level scopes higher.  You can limit the variables that you see
		   with vars which works exactly as it does for the "V" and "X" commands.
		   Requires the "PadWalker" module version 0.08 or higher; will warn if this
		   isn't installed.  Output is pretty-printed in the same style as for "V" and
		   the format is controlled by the same options.

       T	   Produce a stack backtrace.  See below for details on its output.

       s [expr]    Single step.  Executes until the beginning of another statement, descending
		   into subroutine calls.  If an expression is supplied that includes function
		   calls, it too will be single-stepped.

       n [expr]    Next.  Executes over subroutine calls, until the beginning of the next state-
		   ment.  If an expression is supplied that includes function calls, those func-
		   tions will be executed with stops before each statement.

       r	   Continue until the return from the current subroutine.  Dump the return value
		   if the "PrintRet" option is set (default).

       <CR>	   Repeat last "n" or "s" command.

       c [line|sub]
		   Continue, optionally inserting a one-time-only breakpoint at the specified
		   line or subroutine.

       l	   List next window of lines.

       l min+incr  List "incr+1" lines starting at "min".

       l min-max   List lines "min" through "max".  "l -" is synonymous to "-".

       l line	   List a single line.

       l subname   List first window of lines from subroutine.	subname may be a variable that
		   contains a code reference.

       -	   List previous window of lines.

       v [line]    View a few lines of code around the current line.

       .	   Return the internal debugger pointer to the line last executed, and print out
		   that line.

       f filename  Switch to viewing a different file or "eval" statement.  If filename is not a
		   full pathname found in the values of %INC, it is considered a regex.

		   "eval"ed strings (when accessible) are considered to be filenames: "f (eval
		   7)" and "f eval 7\b" access the body of the 7th "eval"ed string (in the order
		   of execution).  The bodies of the currently executed "eval" and of "eval"ed
		   strings that define subroutines are saved and thus accessible.

       /pattern/   Search forwards for pattern (a Perl regex); final / is optional.  The search
		   is case-insensitive by default.

       ?pattern?   Search backwards for pattern; final ? is optional.  The search is case-insen-
		   sitive by default.

       L [abw]	   List (default all) actions, breakpoints and watch expressions

       S [[!]regex]
		   List subroutine names [not] matching the regex.

       t	   Toggle trace mode (see also the "AutoTrace" option).

       t expr	   Trace through execution of "expr".  See "Frame Listing Output Examples" in
		   perldebguts for examples.

       b	   Sets breakpoint on current line

       b [line] [condition]
		   Set a breakpoint before the given line.  If a condition is specified, it's
		   evaluated each time the statement is reached: a breakpoint is taken only if
		   the condition is true.  Breakpoints may only be set on lines that begin an
		   executable statement.  Conditions don't use "if":

		       b 237 $x > 30
		       b 237 ++$count237 < 11
		       b 33 /pattern/i

       b subname [condition]
		   Set a breakpoint before the first line of the named subroutine.  subname may
		   be a variable containing a code reference (in this case condition is not sup-

       b postpone subname [condition]
		   Set a breakpoint at first line of subroutine after it is compiled.

       b load filename
		   Set a breakpoint before the first executed line of the filename, which should
		   be a full pathname found amongst the %INC values.

       b compile subname
		   Sets a breakpoint before the first statement executed after the specified sub-
		   routine is compiled.

       B line	   Delete a breakpoint from the specified line.

       B *	   Delete all installed breakpoints.

       a [line] command
		   Set an action to be done before the line is executed.  If line is omitted, set
		   an action on the line about to be executed.	The sequence of steps taken by
		   the debugger is

		     1. check for a breakpoint at this line
		     2. print the line if necessary (tracing)
		     3. do any actions associated with that line
		     4. prompt user if at a breakpoint or in single-step
		     5. evaluate line

		   For example, this will print out $foo every time line 53 is passed:

		       a 53 print "DB FOUND $foo\n"

       A line	   Delete an action from the specified line.

       A *	   Delete all installed actions.

       w expr	   Add a global watch-expression.  We hope you know what one of these is, because
		   they're supposed to be obvious.

       W expr	   Delete watch-expression

       W *	   Delete all watch-expressions.

       o	   Display all options

       o booloption ...
		   Set each listed Boolean option to the value 1.

       o anyoption? ...
		   Print out the value of one or more options.

       o option=value ...
		   Set the value of one or more options.  If the value has internal whitespace,
		   it should be quoted.  For example, you could set "o pager="less -MQeicsNfr""
		   to call less with those specific options.  You may use either single or double
		   quotes, but if you do, you must escape any embedded instances of same sort of
		   quote you began with, as well as any escaping any escapes that immediately
		   precede that quote but which are not meant to escape the quote itself.  In
		   other words, you follow single-quoting rules irrespective of the quote; eg: "o
		   option='this isn\'t bad'" or "o option="She said, \"Isn't it?\""".

		   For historical reasons, the "=value" is optional, but defaults to 1 only where
		   it is safe to do so--that is, mostly for Boolean options.  It is always better
		   to assign a specific value using "=".  The "option" can be abbreviated, but
		   for clarity probably should not be.	Several options can be set together.  See
		   "Configurable Options" for a list of these.

       < ?	   List out all pre-prompt Perl command actions.

       < [ command ]
		   Set an action (Perl command) to happen before every debugger prompt.  A multi-
		   line command may be entered by backslashing the newlines.  WARNING If "com-
		   mand" is missing, all actions are wiped out!

       << command  Add an action (Perl command) to happen before every debugger prompt.  A multi-
		   line command may be entered by backwhacking the newlines.

       > ?	   List out post-prompt Perl command actions.

       > command   Set an action (Perl command) to happen after the prompt when you've just given
		   a command to return to executing the script.  A multi-line command may be
		   entered by backslashing the newlines (we bet you couldn't've guessed this by
		   now).  WARNING If "command" is missing, all actions are wiped out!

       >> command  Adds an action (Perl command) to happen after the prompt when you've just
		   given a command to return to executing the script.  A multi-line command may
		   be entered by backslashing the newlines.

       { ?	   List out pre-prompt debugger commands.

       { [ command ]
		   Set an action (debugger command) to happen before every debugger prompt.  A
		   multi-line command may be entered in the customary fashion.	WARNING If "com-
		   mand" is missing, all actions are wiped out!

		   Because this command is in some senses new, a warning is issued if you appear
		   to have accidentally entered a block instead.  If that's what you mean to do,
		   write it as with ";{ ... }" or even "do { ... }".

       {{ command  Add an action (debugger command) to happen before every debugger prompt.  A
		   multi-line command may be entered, if you can guess how: see above.

       ! number    Redo a previous command (defaults to the previous command).

       ! -number   Redo number'th previous command.

       ! pattern   Redo last command that started with pattern.  See "o recallCommand", too.

       !! cmd	   Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT) See "o shell-
		   Bang", also.  Note that the user's current shell (well, their $ENV{SHELL}
		   variable) will be used, which can interfere with proper interpretation of exit
		   status or signal and coredump information.

       source file Read and execute debugger commands from file.  file may itself contain
		   "source" commands.

       H -number   Display last n commands.  Only commands longer than one character are listed.
		   If number is omitted, list them all.

       q or ^D	   Quit.  ("quit" doesn't work for this, unless you've made an alias) This is the
		   only supported way to exit the debugger, though typing "exit" twice might

		   Set the "inhibit_exit" option to 0 if you want to be able to step off the end
		   the script.	You may also need to set $finished to 0 if you want to step
		   through global destruction.

       R	   Restart the debugger by "exec()"ing a new session.  We try to maintain your
		   history across this, but internal settings and command-line options may be

		   The following setting are currently preserved: history, breakpoints, actions,
		   debugger options, and the Perl command-line options -w, -I, and -e.

       |dbcmd	   Run the debugger command, piping DB::OUT into your current pager.

       ||dbcmd	   Same as "|dbcmd" but DB::OUT is temporarily "select"ed as well.

       = [alias value]
		   Define a command alias, like

		       = quit q

		   or list current aliases.

       command	   Execute command as a Perl statement.  A trailing semicolon will be supplied.
		   If the Perl statement would otherwise be confused for a Perl debugger, use a
		   leading semicolon, too.

       m expr	   List which methods may be called on the result of the evaluated expression.
		   The expression may evaluated to a reference to a blessed object, or to a pack-
		   age name.

       M	   Displays all loaded modules and their versions

       man [manpage]
		   Despite its name, this calls your system's default documentation viewer on the
		   given page, or on the viewer itself if manpage is omitted.  If that viewer is
		   man, the current "Config" information is used to invoke man using the proper
		   MANPATH or -M manpath option.  Failed lookups of the form "XXX" that match
		   known manpages of the form perlXXX will be retried.	This lets you type "man
		   debug" or "man op" from the debugger.

		   On systems traditionally bereft of a usable man command, the debugger invokes
		   perldoc.  Occasionally this determination is incorrect due to recalcitrant
		   vendors or rather more felicitously, to enterprising users.	If you fall into
		   either category, just manually set the $DB::doccmd variable to whatever viewer
		   to view the Perl documentation on your system.  This may be set in an rc file,
		   or through direct assignment.  We're still waiting for a working example of
		   something along the lines of:

		       $DB::doccmd = 'netscape -remote http://something.here/';

       Configurable Options

       The debugger has numerous options settable using the "o" command, either interactively or
       from the environment or an rc file.  (./.perldb or ~/.perldb under Unix.)

       "recallCommand", "ShellBang"
		   The characters used to recall command or spawn shell.  By default, both are
		   set to "!", which is unfortunate.

       "pager"	   Program to use for output of pager-piped commands (those beginning with a "|"
		   character.)	By default, $ENV{PAGER} will be used.  Because the debugger uses
		   your current terminal characteristics for bold and underlining, if the chosen
		   pager does not pass escape sequences through unchanged, the output of some
		   debugger commands will not be readable when sent through the pager.

       "tkRunning" Run Tk while prompting (with ReadLine).

       "signalLevel", "warnLevel", "dieLevel"
		   Level of verbosity.	By default, the debugger leaves your exceptions and warn-
		   ings alone, because altering them can break correctly running programs.  It
		   will attempt to print a message when uncaught INT, BUS, or SEGV signals
		   arrive.  (But see the mention of signals in BUGS below.)

		   To disable this default safe mode, set these values to something higher than
		   0.  At a level of 1, you get backtraces upon receiving any kind of warning
		   (this is often annoying) or exception (this is often valuable).  Unfortu-
		   nately, the debugger cannot discern fatal exceptions from non-fatal ones.  If
		   "dieLevel" is even 1, then your non-fatal exceptions are also traced and
		   unceremoniously altered if they came from "eval'd" strings or from any kind of
		   "eval" within modules you're attempting to load.  If "dieLevel" is 2, the
		   debugger doesn't care where they came from:	It usurps your exception handler
		   and prints out a trace, then modifies all exceptions with its own embellish-
		   ments.  This may perhaps be useful for some tracing purposes, but tends to
		   hopelessly destroy any program that takes its exception handling seriously.

       "AutoTrace" Trace mode (similar to "t" command, but can be put into "PERLDB_OPTS").

       "LineInfo"  File or pipe to print line number info to.  If it is a pipe (say, "|vis-
		   ual_perl_db"), then a short message is used.  This is the mechanism used to
		   interact with a slave editor or visual debugger, such as the special "vi" or
		   "emacs" hooks, or the "ddd" graphical debugger.

		   If 0, allows stepping off the end of the script.

       "PrintRet"  Print return value after "r" command if set (default).

       "ornaments" Affects screen appearance of the command line (see Term::ReadLine).	There is
		   currently no way to disable these, which can render some output illegible on
		   some displays, or with some pagers.	This is considered a bug.

       "frame"	   Affects the printing of messages upon entry and exit from subroutines.  If
		   "frame & 2" is false, messages are printed on entry only. (Printing on exit
		   might be useful if interspersed with other messages.)

		   If "frame & 4", arguments to functions are printed, plus context and caller
		   info.  If "frame & 8", overloaded "stringify" and "tie"d "FETCH" is enabled on
		   the printed arguments.  If "frame & 16", the return value from the subroutine
		   is printed.

		   The length at which the argument list is truncated is governed by the next

		   Length to truncate the argument list when the "frame" option's bit 4 is set.

		   Change the size of code list window (default is 10 lines).

       The following options affect what happens with "V", "X", and "x" commands:

       "arrayDepth", "hashDepth"
		   Print only first N elements ('' for all).

       "dumpDepth" Limit recursion depth to N levels when dumping structures.  Negative values
		   are interpreted as infinity.  Default: infinity.

       "compactDump", "veryCompact"
		   Change the style of array and hash output.  If "compactDump", short array may
		   be printed on one line.

       "globPrint" Whether to print contents of globs.

		   Dump arrays holding debugged files.

		   Dump symbol tables of packages.

		   Dump contents of "reused" addresses.

       "quote", "HighBit", "undefPrint"
		   Change the style of string dump.  The default value for "quote" is "auto"; one
		   can enable double-quotish or single-quotish format by setting it to """ or
		   "'", respectively.  By default, characters with their high bit set are printed

       "UsageOnly" Rudimentary per-package memory usage dump.  Calculates total size of strings
		   found in variables in the package.  This does not include lexicals in a mod-
		   ule's file scope, or lost in closures.

       After the rc file is read, the debugger reads the $ENV{PERLDB_OPTS} environment variable
       and parses this as the remainder of a `O ...'  line as one might enter at the debugger
       prompt.	You may place the initialization options "TTY", "noTTY", "ReadLine", and "Non-
       Stop" there.

       If your rc file contains:

	 parse_options("NonStop=1 LineInfo=db.out AutoTrace");

       then your script will run without human intervention, putting trace information into the
       file db.out.  (If you interrupt it, you'd better reset "LineInfo" to /dev/tty if you
       expect to see anything.)

       "TTY"	   The TTY to use for debugging I/O.

       "noTTY"	   If set, the debugger goes into "NonStop" mode and will not connect to a TTY.
		   If interrupted (or if control goes to the debugger via explicit setting of
		   $DB::signal or $DB::single from the Perl script), it connects to a TTY speci-
		   fied in the "TTY" option at startup, or to a tty found at runtime using the
		   "Term::Rendezvous" module of your choice.

		   This module should implement a method named "new" that returns an object with
		   two methods: "IN" and "OUT".  These should return filehandles to use for
		   debugging input and output correspondingly.	The "new" method should inspect
		   an argument containing the value of $ENV{PERLDB_NOTTY} at startup, or
		   "/tmp/perldbtty$$" otherwise.  This file is not inspected for proper owner-
		   ship, so security hazards are theoretically possible.

       "ReadLine"  If false, readline support in the debugger is disabled in order to debug
		   applications that themselves use ReadLine.

       "NonStop"   If set, the debugger goes into non-interactive mode until interrupted, or pro-
		   grammatically by setting $DB::signal or $DB::single.

       Here's an example of using the $ENV{PERLDB_OPTS} variable:

	   $ PERLDB_OPTS="NonStop frame=2" perl -d myprogram

       That will run the script myprogram without human intervention, printing out the call tree
       with entry and exit points.  Note that "NonStop=1 frame=2" is equivalent to "N f=2", and
       that originally, options could be uniquely abbreviated by the first letter (modulo the
       "Dump*" options).  It is nevertheless recommended that you always spell them out in full
       for legibility and future compatibility.

       Other examples include

	   $ PERLDB_OPTS="NonStop LineInfo=listing frame=2" perl -d myprogram

       which runs script non-interactively, printing info on each entry into a subroutine and
       each executed line into the file named listing.	(If you interrupt it, you would better
       reset "LineInfo" to something "interactive"!)

       Other examples include (using standard shell syntax to show environment variable set-

	 $ ( PERLDB_OPTS="NonStop frame=1 AutoTrace LineInfo=tperl.out"
	     perl -d myprogram )

       which may be useful for debugging a program that uses "Term::ReadLine" itself.  Do not
       forget to detach your shell from the TTY in the window that corresponds to /dev/ttyXX,
       say, by issuing a command like

	 $ sleep 1000000

       See "Debugger Internals" in perldebguts for details.

       Debugger input/output

       Prompt  The debugger prompt is something like


	       or even


	       where that number is the command number, and which you'd use to access with the
	       built-in csh-like history mechanism.  For example, "!17" would repeat command num-
	       ber 17.	The depth of the angle brackets indicates the nesting depth of the debug-
	       ger.  You could get more than one set of brackets, for example, if you'd already
	       at a breakpoint and then printed the result of a function call that itself has a
	       breakpoint, or you step into an expression via "s/n/t expression" command.

       Multiline commands
	       If you want to enter a multi-line command, such as a subroutine definition with
	       several statements or a format, escape the newline that would normally end the
	       debugger command with a backslash.  Here's an example:

		     DB<1> for (1..4) { 	\
		     cont:     print "ok\n";   \
		     cont: }

	       Note that this business of escaping a newline is specific to interactive commands
	       typed into the debugger.

       Stack backtrace
	       Here's an example of what a stack backtrace via "T" command might look like:

		   $ = main::infested called from file `Ambulation.pm' line 10
		   @ = Ambulation::legs(1, 2, 3, 4) called from file `camel_flea' line 7
		   $ = main::pests('bactrian', 4) called from file `camel_flea' line 4

	       The left-hand character up there indicates the context in which the function was
	       called, with "$" and "@" meaning scalar or list contexts respectively, and "."
	       meaning void context (which is actually a sort of scalar context).  The display
	       above says that you were in the function "main::infested" when you ran the stack
	       dump, and that it was called in scalar context from line 10 of the file Ambula-
	       tion.pm, but without any arguments at all, meaning it was called as &infested.
	       The next stack frame shows that the function "Ambulation::legs" was called in list
	       context from the camel_flea file with four arguments.  The last stack frame shows
	       that "main::pests" was called in scalar context, also from camel_flea, but from
	       line 4.

	       If you execute the "T" command from inside an active "use" statement, the back-
	       trace will contain both a "require" frame and an "eval") frame.

       Line Listing Format
	       This shows the sorts of output the "l" command can produce:

		   DB<<13>> l
		 101:		     @i{@i} = ();
		 102:b		     @isa{@i,$pack} = ()
		 103			 if(exists $i{$prevpack} || exists $isa{$pack});
		 104		 }
		 106		 next
		 107==> 	     if(exists $isa{$pack});
		 109:a		 if ($extra-- > 0) {
		 110:		     %isa = ($pack,1);

	       Breakable lines are marked with ":".  Lines with breakpoints are marked by "b" and
	       those with actions by "a".  The line that's about to be executed is marked by

	       Please be aware that code in debugger listings may not look the same as your orig-
	       inal source code.  Line directives and external source filters can alter the code
	       before Perl sees it, causing code to move from its original positions or take on
	       entirely different forms.

       Frame listing
	       When the "frame" option is set, the debugger would print entered (and optionally
	       exited) subroutines in different styles.  See perldebguts for incredibly long
	       examples of these.

       Debugging compile-time statements

       If you have compile-time executable statements (such as code within BEGIN and CHECK blocks
       or "use" statements), these will not be stopped by debugger, although "require"s and INIT
       blocks will, and compile-time statements can be traced with "AutoTrace" option set in
       "PERLDB_OPTS").	From your own Perl code, however, you can transfer control back to the
       debugger using the following statement, which is harmless if the debugger is not running:

	   $DB::single = 1;

       If you set $DB::single to 2, it's equivalent to having just typed the "n" command, whereas
       a value of 1 means the "s" command.  The $DB::trace  variable should be set to 1 to simu-
       late having typed the "t" command.

       Another way to debug compile-time code is to start the debugger, set a breakpoint on the
       load of some module:

	   DB<7> b load f:/perllib/lib/Carp.pm
	 Will stop on load of `f:/perllib/lib/Carp.pm'.

       and then restart the debugger using the "R" command (if possible).  One can use "b compile
       subname" for the same purpose.

       Debugger Customization

       The debugger probably contains enough configuration hooks that you won't ever have to mod-
       ify it yourself.  You may change the behaviour of debugger from within the debugger using
       its "o" command, from the command line via the "PERLDB_OPTS" environment variable, and
       from customization files.

       You can do some customization by setting up a .perldb file, which contains initialization
       code.  For instance, you could make aliases like these (the last one is one people expect
       to be there):

	   $DB::alias{'len'}  = 's/^len(.*)/p length($1)/';
	   $DB::alias{'stop'} = 's/^stop (at|in)/b/';
	   $DB::alias{'ps'}   = 's/^ps\b/p scalar /';
	   $DB::alias{'quit'} = 's/^quit(\s*)/exit/';

       You can change options from .perldb by using calls like this one;

	   parse_options("NonStop=1 LineInfo=db.out AutoTrace=1 frame=2");

       The code is executed in the package "DB".  Note that .perldb is processed before process-
       ing "PERLDB_OPTS".  If .perldb defines the subroutine "afterinit", that function is called
       after debugger initialization ends.  .perldb may be contained in the current directory, or
       in the home directory.  Because this file is sourced in by Perl and may contain arbitrary
       commands, for security reasons, it must be owned by the superuser or the current user, and
       writable by no one but its owner.

       If you want to modify the debugger, copy perl5db.pl from the Perl library to another name
       and hack it to your heart's content.  You'll then want to set your "PERL5DB" environment
       variable to say something like this:

	   BEGIN { require "myperl5db.pl" }

       As a last resort, you could also use "PERL5DB" to customize the debugger by directly set-
       ting internal variables or calling debugger functions.

       Note that any variables and functions that are not documented in this document (or in
       perldebguts) are considered for internal use only, and as such are subject to change with-
       out notice.

       Readline Support

       As shipped, the only command-line history supplied is a simplistic one that checks for
       leading exclamation points.  However, if you install the Term::ReadKey and Term::ReadLine
       modules from CPAN, you will have full editing capabilities much like GNU readline(3) pro-
       vides.  Look for these in the modules/by-module/Term directory on CPAN.	These do not sup-
       port normal vi command-line editing, however.

       A rudimentary command-line completion is also available.  Unfortunately, the names of lex-
       ical variables are not available for completion.

       Editor Support for Debugging

       If you have the FSF's version of emacs installed on your system, it can interact with the
       Perl debugger to provide an integrated software development environment reminiscent of its
       interactions with C debuggers.

       Perl comes with a start file for making emacs act like a syntax-directed editor that
       understands (some of) Perl's syntax.  Look in the emacs directory of the Perl source dis-

       A similar setup by Tom Christiansen for interacting with any vendor-shipped vi and the X11
       window system is also available.  This works similarly to the integrated multiwindow sup-
       port that emacs provides, where the debugger drives the editor.	At the time of this writ-
       ing, however, that tool's eventual location in the Perl distribution was uncertain.

       Users of vi should also look into vim and gvim, the mousey and windy version, for coloring
       of Perl keywords.

       Note that only perl can truly parse Perl, so all such CASE tools fall somewhat short of
       the mark, especially if you don't program your Perl as a C programmer might.

       The Perl Profiler

       If you wish to supply an alternative debugger for Perl to run, just invoke your script
       with a colon and a package argument given to the -d flag.  The most popular alternative
       debuggers for Perl is the Perl profiler.  Devel::DProf is now included with the standard
       Perl distribution.  To profile your Perl program in the file mycode.pl, just type:

	   $ perl -d:DProf mycode.pl

       When the script terminates the profiler will dump the profile information to a file called
       tmon.out.  A tool like dprofpp, also supplied with the standard Perl distribution, can be
       used to interpret the information in that profile.

Debugging regular expressions
       "use re 'debug'" enables you to see the gory details of how the Perl regular expression
       engine works. In order to understand this typically voluminous output, one must not only
       have some idea about how regular expression matching works in general, but also know how
       Perl's regular expressions are internally compiled into an automaton. These matters are
       explored in some detail in "Debugging regular expressions" in perldebguts.

Debugging memory usage
       Perl contains internal support for reporting its own memory usage, but this is a fairly
       advanced concept that requires some understanding of how memory allocation works.  See
       "Debugging Perl memory usage" in perldebguts for the details.

       You did try the -w switch, didn't you?

       perldebtut, perldebguts, re, DB, Devel::DProf, dprofpp, Dumpvalue, and perlrun.

       You cannot get stack frame information or in any fashion debug functions that were not
       compiled by Perl, such as those from C or C++ extensions.

       If you alter your @_ arguments in a subroutine (such as with "shift" or "pop"), the stack
       backtrace will not show the original values.

       The debugger does not currently work in conjunction with the -W command-line switch,
       because it itself is not free of warnings.

       If you're in a slow syscall (like "wait"ing, "accept"ing, or "read"ing from your keyboard
       or a socket) and haven't set up your own $SIG{INT} handler, then you won't be able to
       CTRL-C your way back to the debugger, because the debugger's own $SIG{INT} handler doesn't
       understand that it needs to raise an exception to longjmp(3) out of slow syscalls.

perl v5.8.0				    2003-02-18				     PERLDEBUG(1)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 12:58 AM.