lv: a Powerful Multilingual File Viewer
[-Acoding-system] [-Icoding-system] [-Kcoding-system]
[-Ocoding-system] [-Pcoding-system] [-Dcoding-system]
[-Ssseq] [-Srseq] [-Sbseq] [-Suseq] [-Shseq]
[-Tnumber] [-Wwidth] [-Hheight] [-E'editor'] [-+]
[-] (grep pattern) [files ...]
Multilingual file viewer
lv is a powerful multilingual file viewer. Apparently, lv looks like less (1), a
representative file viewer on UNIX as you know, so UNIX people (and less people on
other OSs) don't have to learn a burdensome new interface. lv can be used on MSDOS
ANSI terminals and almost all UNIX platforms. lv is a currently growing software,
so your feedback is welcome and helpful for us to refine the future lv.
Multiple coding systems
lv can decode and encode multilingual streams through many coding systems, for
example, ISO 2022 based coding systems such as iso-2022-jp, and EUC (Extended Unix
Code) like euc-japan. Furthermore, localized coding systems such as shift-jis,
big5 and HZ are also supported. lv can be used not only as a file viewer but also
as a coding-system translation filter like nkf (1) and tcs (1).
Multilingual regular expressions / Multilingual grep
lv can recognize multi-bytes patterns as regular expressions, and lv also provides
multilingual grep (1) functionality by giving it another name, lgrep. Pattern
matching is conducted in the charset level, so an EUC fragment, for example, can be
found in the ISO 2022 tailored streams, of course.
Supporting the Unicode standard
lv provides Unicode facilities which enables you to handle Unicode streams encoded
in UTF-7 or UTF-8, and lv can also convert their code-points between Unicode and
other charsets. So you can display Unicode or foreign texts on your terminal,
using the code conversion function to your favorite charsets via Unicode. (How-
ever, MSDOS version of lv has none of the Unicode facility.)
ANSI escape sequence through
lv can recognize ANSI escape sequences for text decoration. So you can look ANSI-
decorated streams such as colored source codes generated by another software just
like intended image on ANSI terminals.
lv is a completely original software including no code drawn from less and grep and
other programs at all.
Set all coding systems to coding-system.
Set input coding system to coding-system.
Set keyboard coding system to coding-system. If it is not set, output coding sys-
tem will be applied to it.
Set output coding system to coding-system.
Set pathname coding system to coding-system.
Set default EUC coding system to coding-system.
a: auto-select (only for input stream)
r: raw mode
-Il2: input coding system is iso-8859-2
-Ks: keyboard coding system is shift-jis
-Oek: output coding system is euc-korea
-Ab: all coding systems are big5
Coding-system translations / Code-points conversions:
iso-2022-cn, -jp, -kr can be converted into euc-china or -taiwan, euc-japan, euc-
korea, respectively (and vice versa). shift-jis uses the same internal code-points
as iso-2022-jp and euc-japan.
Since big5 characters can be converted into CNS 11643-1992 with negligible incom-
pleteness, big5 streams can be translated into iso-2022-cn or euc-taiwan (and vice
versa) with code-points conversion. Note that the iso-2022-cn referred here is not
GB sequence, only just CNS one. You should remember that lv cannot translate big5
into GB directly.
The search function of lv may not work correctly when lv additionally performs
``code-points'' conversion (not ``coding-system'' translation), because visible
code and internal code are different from each other. lv will try to avoid this
problem with converting charsets of search patterns automatically, but this func-
tion is not always perfect.
-E'<editor>' (default 'vi -c %d')
Editor name (default 'vi -c %d')
``%d'' means the line number of current position in a file.
-q Assert there is delete/insert-lines control.
Please set this option on a MSDOS ANSI terminal that has capability to delete
and/or insert lines. As to termcap and terminfo version, it will be set automati-
Set ANSI Standout sequence to seq (default "7")
Set ANSI Reverse sequence to seq (default "7")
Set ANSI Blink sequence to seq (default "5")
Set ANSI Underline sequence to seq (default "4")
Set ANSI Highlight sequence to seq (default "1")
These sequences are inserted between ``ESC ['' and ``m'' to construct full ANSI
Set Threshold-code which divides Unicode code-points in two regions. Characters
belonging to the lower region are assumed to have a width of one, and the higher
characters are equated to a width of two. (Default: 12288, = 0x3000)
-m Force Unicode code-points which have the same glyphs as iso-8859-* to be Mapped to
iso-8859-* in a conversion from Unicode to another character set which also has the
corresponding code-points, in particular, Asian charsets.
-a Adjust character set for search pattern (default)
-c Allow ANSI escape sequences for text decoration (Color)
-d, -i Make regexp-searches ignore case (case folD search) (default)
-f Substitute Fixed strings for regular expressions
-k Convert X0201 Katakana to X0208
-l Allow physical lines of each logical line printed on the screen to be concatenated
for cut and paste after screen refresh
-s Force old pages to be swept out from the screen Smoothly
-u Unify several character sets, eg. JIS X0208 and C6226. In addition, lv equates ISO
646 variants, eg. JIS X0201-Roman, and unknown charsets with ASCII.
-g Turn on lgrep mode.
-n Prefix each line of output with the line number within its input file on lgrep.
-v Invert the sense of matching on lgrep.
-z Enable HZ auto-detection (also enabled by run-time C-t).
-+ Clear all options
You can also turn OFF specified options, using ``+<option>'' like +c, +d, ... +z.
- Treat the following arguments as filenames
lv works like grep (1) when its name is lgrep
-V Show lv version
-h Show this help
Options can be described in configuration file ``.lv'' (``_lv'' on MSDOS) located at you
HOME directory and/or current working directory. They can be also described in the envi-
ronment variable LV. Every configuration will be overloaded in this order if there is.
Command line options are always read finally.
COMMAND KEY BINDINGS
g, <: Jump to the line number (default: top of the file)
G, >: Jump to the line number (default: bottom of the file)
p: Jump to the percentage position in line numbers (0-100)
Previous half page
k, w, C-k, y, C-y, C-p:
j, C-j, e, C-e, C-n, CR:
Next half page
f, C-f, C-v, SP:
Find a string in the forward direction (regular expression)
Find a string in the backward direction (regular expression)
n: Repeat previous search in forward direction
N: Repeat previous search in backward direction (not REVERSE)
C-l: Redisplay all lines
Refresh screen and memory
R: Reload current file
:n: Examine the next file
:p: Examine the previous file
t: Toggle input coding systems
T: Toggle input coding systems reversely
C-t: Toggle HZ decoding mode
v: Launch the editor defined by option -E
Show file information (filename, position, coding system)
V: Show LV version
C-z: Suspend (call SHELL or ``command.com'' under MSDOS)
q, Q: Quit
Previous/Next half page
HOW TO INPUT SEARCH STRINGS?
Enter the current string
C-h, BS, DEL:
Delete one character (backspace)
C-u: Cancel the current string and try again
C-p: Restore a few old strings incrementally (history)
Special characters are ^, $, ., *, +, ?, [, ^, -, ], \. \| specifies an alternative. \(,
\) is a grouping construct. \1 and \2 matches any charset consists of one- or two- col-
umn(s) characters respectively. Mutually overlapping ranges (or charset) are not guaran-
LV Homepage: http://www.ff.iij4u.or.jp/~nrt/lv/
All rights reserved. Copyright (C) 1996-1999 by NARITA Tomio.
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either ver-
sion 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
Please send bug reports to: firstname.lastname@example.org
v.4.49.4 (Aug.24th,2000) LV(1)