wlan_xauth(4) [plan9 man page]

WLAN_XAUTH(4)						   BSD Kernel Interfaces Manual 					     WLAN_XAUTH(4)

NAME

     wlan_xauth -- External authenticator support for 802.11 devices

SYNOPSIS

     device wlan_xauth

DESCRIPTION

     The wlan_xauth module is a wlan(4) authenticator plugin for use with user-mode authentication implementations such as hostapd.  It hooks into
     the 802.11 layer and does nothing.  As a result, 802.11 stations that associate are not authorized to send or receive frames until they are
     authorized by an external agent; typically using a protocol such as WPA, 802.1x, or 802.11i.

     This module is automatically loaded by the rc script that normally starts hostapd(8).

SEE ALSO

     wlan(4)

STANDARDS

     More information can be found in the IEEE 802.11, WPA, and 802.11i Standards.

HISTORY

     The wlan_xauth driver first appeared in FreeBSD 6.0.

BSD
								 December 7, 2004							       BSD

HOSTAPD(8)						    BSD System Manager's Manual 						HOSTAPD(8)

NAME

     hostapd -- authenticator for IEEE 802.11 networks

SYNOPSIS

     hostapd [-BdhKtv] [-P pidfile] config-file ...

DESCRIPTION

     The hostapd utility is an authenticator for IEEE 802.11 networks.	It provides full support for WPA/IEEE 802.11i and can also act as an IEEE
     802.1X Authenticator with a suitable backend Authentication Server (typically FreeRADIUS).  The hostapd utility implements the authentication
     protocols that piggyback on top of the normal IEEE 802.11 protocol mechanisms.  To use hostapd as an authenticator, the underlying device
     must support some basic functionality such as the ability to set security information in the 802.11 management frames.  Beware that not all
     devices have this support.

     The hostapd utility is designed to be a ``daemon'' program that runs in the background and acts as the backend component controlling the
     wireless connection.  It supports separate frontend programs such as the text-based frontend, hostapd_cli(8).

     The following arguments must be specified on the command line:

     config-file
	     Use the settings in the specified configuration file; the name of the specified wireless interface is contained in this file.  See
	     hostapd.conf(5) for a description of the configuration file syntax.

	     Changes to the configuration file can be reloaded by sending a SIGHUP to the hostapd processor or with the hostapd_cli(8) utility,
	     using ``hostapd_cli reconfigure''.

OPTIONS

     The options are as follows:

     -d      Enable debugging messages.  If this option is supplied twice, more verbose messages are displayed.

     -h      Show help text.

     -t      Include timestamps in debugging output.

     -v      Display version information on the terminal and exit.

     -B      Detach from the controlling terminal and run as a daemon process in the background.

     -K      Include key information in debugging output.

     -P pidfile
	     Store PID in pidfile.

SEE ALSO

     ath(4), ipw(4), iwi(4), mwl(4), ral(4), rum(4), run(4), ural(4), wi(4), hostapd.conf(5), hostapd_cli(8), ifconfig(8)

HISTORY

     The hostapd utility first appeared in FreeBSD 6.0.

AUTHORS

     The hostapd utility was written by Jouni Malinen <j@w1.fi>.  This manual page is derived from the README file included in the hostapd distri-
     bution.

BSD
								   July 18, 2012							       BSD