Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

rctlblk_set_recipient_pid(3c) [plan9 man page]

rctlblk_set_value(3C)					   Standard C Library Functions 				     rctlblk_set_value(3C)

NAME
rctlblk_set_value, rctlblk_get_firing_time, rctlblk_get_global_action, rctlblk_get_global_flags, rctlblk_get_local_action, rctl- blk_get_local_flags, rctlblk_get_privilege, rctlblk_get_recipient_pid, rctlblk_get_value, rctlblk_get_enforced_value, rctl- blk_set_local_action, rctlblk_set_local_flags, rctlblk_set_privilege, rctlblk_set_recipient_pid, rctlblk_size - manipulate resource control blocks SYNOPSIS
#include <rctl.h> hrtime_t rctlblk_get_firing_time(rctlblk_t *rblk); int rctlblk_get_global_action(rctlblk_t *rblk); int rctlblk_get_global_flags(rctlblk_t *rblk); int rctlblk_get_local_action(rctlblk_t *rblk, int *signalp); int rctlblk_get_local_flags(rctlblk_t *rblk); rctl_priv_t rctlblk_get_privilege(rctlblk_t *rblk); id_t rctlblk_get_recipient_pid(rctlblk_t *rblk); rctl_qty_t rctlblk_get_value(rctlblk_t *rblk); rctl_qty_t rctlblk_get_enforced_value(rctlblk_t *rblk); void rctlblk_set_local_action(rctlblk_t *rblk, rctl_action_t action, int signal); void rctlblk_set_local_flags(rctlblk_t *rblk, int flags); void rctlblk_set_privilege(rctlblk_t *rblk, rctl_priv_t privilege); void rctlblk_set_value(rctlblk_t *rblk, rctl_qty_t value); void rctlblk_set_recipient_pid(id_tpid); size_t rctlblk_size(void); DESCRIPTION
The resource control block routines allow the establishment or retrieval of values from a resource control block used to transfer informa- tion using the getrctl(2) and setrctl(2) functions. Each of the routines accesses or sets the resource control block member corresponding to its name. Certain of these members are read-only and do not possess set routines. The firing time of a resource control block is 0 if the resource control action-value has not been exceeded for its lifetime on the process. Otherwise the firing time is the value of gethrtime(3C) at the moment the action on the resource control value was taken. The global actions and flags are the action and flags set by rctladm(1M). These values cannot be set with setrctl(2). Valid global actions are listed in the table below. Global flags are generally a published property of the control and are not modifiable. RCTL_GLOBAL_DENY_ALWAYS The action taken when a control value is exceeded on this control will always include denial of the resource. RCTL_GLOBAL_DENY_NEVER The action taken when a control value is exceeded on this control will always exclude denial of the resource; the resource will always be granted, although other actions can also be taken. RCTL_GLOBAL_SIGNAL_NEVER No signal actions are permitted on this control. RCTL_GLOBAL_CPU_TIME The valid signals available as local actions include the SIGXCPU signal. RCTL_GLOBAL_FILE_SIZE The valid signals available as local actions include the SIGXFSZ signal. RCTL_GLOBAL_INFINITE This resource control supports the concept of an unlimited value; generally true only of accumulation-oriented resources, such as CPU time. RCTL_GLOBAL_LOWERABLE Non-privileged callers are able to lower the value of privileged resource control values on this control. RCTL_GLOBAL_NOACTION No global action will be taken when a resource control value is exceeded on this control. RCTL_GLOBAL_NOBASIC No values with the RCPRIV_BASIC privilege are permitted on this control. RCTL_GLOBAL_SYSLOG A standard message will be logged by the syslog(3C) facility when any resource control value on a sequence associated with this control is exceeded. RCTL_GLOBAL_UNOBSERVABLE The resource control (generally on a task- or project-related control) does not support observational control values. An RCPRIV_BASIC privileged control value placed by a process on the task or process will generate an action only if the value is exceeded by that process. RCTL_GLOBAL_BYTES This resource control represents a number of bytes. RCTL_GLOBAL_SECONDS This resource control represents a quantity of time in seconds. RCTL_GLOBAL_COUNT This resource control represents an integer count. The local action and flags are those on the current resource control value represented by this resource control block. Valid actions and flags are listed in the table below. In the case of RCTL_LOCAL_SIGNAL, the second argument to rctlblk_set_local_action() contains the sig- nal to be sent. Similarly, the signal to be sent is copied into the integer location specified by the second argument to rctl- blk_get_local_action(). A restricted set of signals is made available for normal use by the resource control facility: SIGBART, SIGXRES, SIGHUP, SIGSTOP, SIGTERM, and SIGKILL. Other signals are permitted due to global properties of a specific control. Calls to setrctl() with illegal signals will fail. RCTL_LOCAL_DENY When this resource control value is encountered, the request for the resource will be denied. Set on all values if RCTL_GLOBAL_DENY_ALWAYS is set for this control; cleared on all values if RCTL_GLOBAL_DENY_NEVER is set for this control. RCTL_LOCAL_MAXIMAL This resource control value represents a request for the maximum amount of resource for this control. If RCTL_GLOBAL_INFINITE is set for this resource control, RCTL_LOCAL_MAXIMAL indicates an unlimited resource control value, one that will never be exceeded. RCTL_LOCAL_NOACTION No local action will be taken when this resource control value is exceeded. RCTL_LOCAL_SIGNAL The specified signal, sent by rctlblk_set_local_action(), will be sent to the process that placed this resource control value in the value sequence. This behavior is also true for signal actions on project and task resource controls. The specified signal is sent only to the recipient process, not all processes within the project or task. The rctlblk_get_recipient_pid() function returns the value of the process ID that placed the resource control value for basic rctls. For privileged or system rctls, rctlblk_get_recipient_pid() returns -1. The rctlblk_set_recipient_pid() function sets the recipient pid for a basic rctl. When setrctl(2) is called with the flag RCTL_USE_RECIPI- ENT_PID, this pid is used. Otherwise, the PID of the calling process is used. Only privileged users can set the recipient PID to one other than the PID of the calling process. Process-scoped rctls must have a recipient PID that matches the PID of the calling process. The rctlblk_get_privilege() function returns the privilege of the resource control block. Valid privileges are RCPRIV_BASIC, RCPRIV_PRIVI- LEGED, and RCPRIV_SYSTEM. System resource controls are read-only. Privileged resource controls require the {PRIV_SYS_RESOURCE} privilege to write, unless the RCTL_GLOBAL_LOWERABLE global flag is set, in which case unprivileged applications can lower the value of a privileged control. The rctlblk_get_value() and rctlblk_set_value() functions return or establish the enforced value associated with the resource control. In cases where the process, task, or project associated with the control possesses fewer capabilities than allowable by the current value, the value returned by rctlblk_get_enforced_value() will differ from that returned by rctlblk_get_value(). This capability difference arises with processes using an address space model smaller than the maximum address space model supported by the system. The rctlblk_size() function returns the size of a resource control block for use in memory allocation. The rctlblk_t * type is an opaque pointer whose size is not connected with that of the resource control block itself. Use of rctlblk_size() is illustrated in the example below. RETURN VALUES
The various set routines have no return values. Incorrectly composed resource control blocks will generate errors when used with setrctl(2) or getrctl(2). ERRORS
No error values are returned. Incorrectly constructed resource control blocks will be rejected by the system calls. EXAMPLES
Example 1: Display the contents of a fetched resource control block. The following example displays the contents of a fetched resource control block. #include <rctl.h> #include <stdio.h> #include <stdlib.h> rctlblk_t *rblk; int rsignal; int raction; if ((rblk = malloc(rctlblk_size())) == NULL) { (void) perror("rblk malloc"); exit(1); } if (getrctl("process.max-cpu-time", NULL, rblk, RCTL_FIRST) == -1) { (void) perror("getrctl"); exit(1); } main() { raction = rctlblk_get_local_action(rblk, &rsignal), (void) printf("Resource control for %s ", "process.max-cpu-time"); (void) printf("Process ID: %d ", rctlblk_get_recipient_pid(rblk)); (void) printf("Privilege: %x " rctlblk_get_privilege(rblk)); (void) printf("Global flags: %x " rctlblk_get_global_flags(rblk)); (void) printf("Global actions: %x " rctlblk_get_global_action(rblk)); (void) printf("Local flags: %x " rctlblk_get_local_flags(rblk)); (void) printf("Local action: %x (%d) " raction, raction == RCTL_LOCAL_SIGNAL ? rsignal : 0); (void) printf("Value: %llu ", rctlblk_get_value(rblk)); (void) printf("Enforced value: %llu ", rctlblk_get_enforced_value(rblk)); } ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ |MT-Level |MT-Safe | +-----------------------------+-----------------------------+ SEE ALSO
rctladm(1M), getrctl(2), setrctl(2), gethrtime(3C), attributes(5) SunOS 5.10 22 Mar 2004 rctlblk_set_value(3C)
Man Page