setmetamode(1) [plan9 man page]

SETMETAMODE(1)						      General Commands Manual						    SETMETAMODE(1)

NAME

       setmetamode - define the keyboard meta key handling

SYNOPSIS

       setmetamode [ {meta|bit|metabit | esc|prefix|escprefix} ]

DESCRIPTION

       Without argument, setmetamode prints the current Meta key mode.	With argument, it sets the Meta key mode as indicated.	The setting before
       and after the change are reported.

       The Meta key mode is specific for each VT (and the VT corresponding to stdin is used).  One might use setmetamode in /etc/rc to define  the
       initial state of the Meta key mode, e.g. by
	    INITTY=/dev/tty[1-8]
	    for tty in $INITTY; do
		 setmetamode escprefix < $tty
	    done

OPTIONS

       esc prefix escprefix
	      The Meta key sends an Escape prefix.

       meta bit metabit
	      The Meta key sets the high order bit of the character.

SEE ALSO

       loadkeys(1)

								    30 Jan 1994 						    SETMETAMODE(1)

SETLEDS(1)						      General Commands Manual							SETLEDS(1)

NAME

       setleds - set the keyboard leds

SYNOPSIS

       setleds [-v] [-L] [-D] [-F] [{+|-}num] [{+|-}caps] [{+|-}scroll]

DESCRIPTION

       Setleds reports and changes the led flag settings of a VT (namely NumLock, CapsLock and ScrollLock).  Without arguments, setleds prints the
       current settings.  With arguments, it sets or clears the indicated flags (and leaves the others unchanged). The settings before	and  after
       the change are reported if the -v flag is given.

       The led flag settings are specific for each VT (and the VT corresponding to stdin is used).

       By default (or with option -F), setleds will only change the VT flags (and their setting may be reflected by the keyboard leds).

       With  option  -D,  setleds  will change both the VT flags and their default settings (so that a subsequent reset will not undo the change).
       This might be useful for people who always want to have numlock set.

       With option -L, setleds will not touch the VT flags, but only change the leds.  From this moment on, the leds will no longer reflect the VT
       flags  (but  display whatever is put into them). The command setleds -L (without further arguments) will restore the situation in which the
       leds reflect the VT flags.

       One might use setleds in /etc/rc to define the initial and default state of NumLock, e.g. by
	    INITTY=/dev/tty[1-8]
	    for tty in $INITTY; do
		 setleds -D +num < $tty
	    done

OPTIONS

       -num +num
	      Clear or set NumLock.  (At present, the NumLock setting influences the interpretation of keypad keys.  Pressing the NumLock key com-
	      plements the NumLock setting.)

       -caps +caps
	      Clear  or set CapsLock.  (At present, the CapsLock setting complements the Shift key when applied to letters.  Pressing the CapsLock
	      key complements the CapsLock setting.)

       -scroll +scroll
	      Clear or set ScrollLock.	(At present, pressing the ScrollLock key (or ^S/^Q) stops/starts console output.)

BUGS

       In keyboard application mode the NumLock key does not influence the NumLock flag setting.

SEE ALSO

       loadkeys(1)

								    24 Sep 1994 							SETLEDS(1)