apm(1) [plan9 man page]

APM(1)																	    APM(1)

NAME

       apm - interface with the APM subsystem

SYNOPSIS

       apm [ -VvmMsSdin ]

DESCRIPTION

       This  command  requires	the Advanced Power Management subsystem.  If run without arguments it reads /proc/apm and presents the output in a
       human-readable format.

       Given a -S or -s option it requests that the machine be put into the APM standby or the APM  suspend  state,  respectively.   For  a  brief
       description of these states, see apmd(8).

OPTIONS

       -V, --version
	      Print the version of the program and exit.

       -v, --verbose
	      Also  print  version  information  for the APM subsystem.  The APM subsystem consists of power-management hardware, firmware usually
	      referred to as the APM BIOS and a driver in the operating system kernel.

       -m, --minutes
	      Print the time remaining as a number of minutes.	The default is to print the time remaining in "hours:minutes" format.

       -M, --monitor
	      Continuously monitor and update the status information.  Assumes that the standard output is a terminal.

       -S, --standby
	      Request that the machine be put into the APM standby state.

       -s, --suspend
	      Request that the machine be put into the APM suspend state.

       -d, --debug
	      Print APM status information in a format more useful for debugging.  Implies -v.

FILES

       /proc/apm

AUTHOR

       This program was written by Rik Faith (faith@cs.unc.edu) and may be freely distributed under the terms of the GNU General  Public  License.
       There is ABSOLUTELY NO WARRANTY for this program.  The current maintainer is Avery Pennarun (apenwarr@worldvisions.ca).

SEE ALSO

       xapm(1), apmd(8).

								   January 2004 							    APM(1)

APM(1)                                                                                                                                      APM(1)

NAME

       apm - interface with the APM subsystem

SYNOPSIS

       apm [ -VvmMsSdin ]

DESCRIPTION

       This  command  requires  the Advanced Power Management subsystem.  If run without arguments it reads /proc/apm and presents the output in a
       human-readable format.

       Given a -S or -s option it requests that the machine be put into the APM standby or the APM  suspend  state,  respectively.   For  a  brief
       description of these states, see apmd(8).

OPTIONS

       -V, --version
              Print the version of the program and exit.

       -v, --verbose
              Also  print  version  information  for the APM subsystem.  The APM subsystem consists of power-management hardware, firmware usually
              referred to as the APM BIOS and a driver in the operating system kernel.

       -m, --minutes
              Print the time remaining as a number of minutes.  The default is to print the time remaining in "hours:minutes" format.

       -M, --monitor
              Continuously monitor and update the status information.  Assumes that the standard output is a terminal.

       -S, --standby
              Request that the machine be put into the APM standby state.

       -s, --suspend
              Request that the machine be put into the APM suspend state.

       -d, --debug
              Print APM status information in a format more useful for debugging.  Implies -v.

FILES

       /proc/apm

AUTHOR

       This program was written by Rik Faith (faith@cs.unc.edu) and may be freely distributed under the terms of the GNU General  Public  License.
       There is ABSOLUTELY NO WARRANTY for this program.  The current maintainer is Avery Pennarun (apenwarr@worldvisions.ca).

SEE ALSO

       xapm(1), apmd(8).

                                                                   January 2004                                                             APM(1)