checkbutton(n) Tk Built-In Commands checkbutton(n)
checkbutton - Create and manipulate checkbutton widgets
checkbutton pathName ?options?
-activebackground -disabledforeground -padx
-activeforeground -font -pady
-anchor -foreground -relief
-background -highlightbackground -takefocus
-bitmap -highlightcolor -text
-borderwidth -highlightthickness -textvariable
-compound -image -underline
-cursor -justify -wraplength
See the options manual entry for details on the standard options.
[-command command] Specifies a Tcl command to associate with the button. This command is typically invoked when mouse button 1 is released
over the button window. The button's global variable (-variable option) will be updated before the command is invoked. [-height height]
Specifies a desired height for the button. If an image or bitmap is being displayed in the button then the value is in screen units (i.e.
any of the forms acceptable to Tk_GetPixels); for text it is in lines of text. If this option is not specified, the button's desired
height is computed from the size of the image or bitmap or text being displayed in it. [-indicatoron indicatorOn] Specifies whether or not
the indicator should be drawn. Must be a proper boolean value. If false, the relief option is ignored and the widget's relief is always
sunken if the widget is selected and raised otherwise. [-offrelief offRelief] Specifies the relief for the checkbutton when the indicator
is not drawn and the checkbutton is off. The default value is "raised". By setting this option to "flat" and setting -indicatoron to
false and -overrelief to "raised", the effect is achieved of having a flat button that raises on mouse-over and which is depressed when
activated. This is the behavior typically exhibited by the Bold, Italic, and Underline checkbuttons on the toolbar of a word-processor,
for example. [-offvalue offValue] Specifies value to store in the button's associated variable whenever this button is deselected.
Defaults to "0". [-onvalue onValue] Specifies value to store in the button's associated variable whenever this button is selected.
Defaults to "1". [-overrelief overRelief] Specifies an alternative relief for the checkbutton, to be used when the mouse cursor is over
the widget. This option can be used to make toolbar buttons, by configuring -relief flat -overrelief raised. If the value of this option
is the empty string, then no alternative relief is used when the mouse cursor is over the checkbutton. The empty string is the default
value. [-selectcolor selectColor] Specifies a background color to use when the button is selected. If indicatorOn is true then the color
is used as the background for the indicator regardless of the select state. If indicatorOn is false, this color is used as the background
for the entire widget, in place of background or activeBackground, whenever the widget is selected. If specified as an empty string then
no special color is used for displaying when the widget is selected. [-selectimage selectImage] Specifies an image to display (in place of
the image option) when the checkbutton is selected. This option is ignored unless the image option has been specified. [-state state]
Specifies one of three states for the checkbutton: normal, active, or disabled. In normal state the checkbutton is displayed using the
foreground and background options. The active state is typically used when the pointer is over the checkbutton. In active state the
checkbutton is displayed using the activeForeground and activeBackground options. Disabled state means that the checkbutton should be
insensitive: the default bindings will refuse to activate the widget and will ignore mouse button presses. In this state the disabled-
Foreground and background options determine how the checkbutton is displayed. [-tristateimage tristateImage] Specifies an image to display |
(in place of the image option) when the checkbutton is in tri-state mode. This option is ignored unless the image option has been speci- |
fied. [-tristatevalue tristateValue] Specifies the value that causes the checkbutton to display the multi-value selection, also known as |
the tri-state mode. Defaults to "". [-variable variable] Specifies name of global variable to set to indicate whether or not this button
is selected. Defaults to the name of the button within its parent (i.e. the last element of the button window's path name).
[-width width] Specifies a desired width for the button. If an image or bitmap is being displayed in the button then the value is in
screen units (i.e. any of the forms acceptable to Tk_GetPixels); for text it is in characters. If this option is not specified, the but-
ton's desired width is computed from the size of the image or bitmap or text being displayed in it.
The checkbutton command creates a new window (given by the pathName argument) and makes it into a checkbutton widget. Additional options,
described above, may be specified on the command line or in the option database to configure aspects of the checkbutton such as its colors,
font, text, and initial relief. The checkbutton command returns its pathName argument. At the time this command is invoked, there must
not exist a window named pathName, but pathName's parent must exist.
A checkbutton is a widget that displays a textual string, bitmap or image and a square called an indicator. If text is displayed, it must
all be in a single font, but it can occupy multiple lines on the screen (if it contains newlines or if wrapping occurs because of the
wrapLength option) and one of the characters may optionally be underlined using the underline option. A checkbutton has all of the behav-
ior of a simple button, including the following: it can display itself in either of three different ways, according to the state option; it
can be made to appear raised, sunken, or flat; it can be made to flash; and it invokes a Tcl command whenever mouse button 1 is clicked
over the checkbutton.
In addition, checkbuttons can be selected. If a checkbutton is selected then the indicator is normally drawn with a selected appearance,
and a Tcl variable associated with the checkbutton is set to a particular value (normally 1). The indicator is drawn with a check mark |
inside. If the checkbutton is not selected, then the indicator is drawn with a deselected appearance, and the associated variable is set |
to a different value (typically 0). The indicator is drawn without a check mark inside. In the special case where the variable (if speci- |
fied) has a value that matches the tristatevalue, the indicator is drawn with a tri-state appearance and is in the tri-state mode indicat- |
ing mixed or multiple values. (This is used when the check box represents the state of multiple items.) The indicator is drawn in a plat- |
form dependent manner. Under Unix and Windows, the background interior of the box is "grayed". Under Mac, the indicator is drawn with a |
dash mark inside. By default, the name of the variable associated with a checkbutton is the same as the name used to create the checkbut- |
ton. The variable name, and the "on", "off" and "tristate" values stored in it, may be modified with options on the command line or in the |
option database. Configuration options may also be used to modify the way the indicator is displayed (or whether it is displayed at all). |
By default a checkbutton is configured to select and deselect itself on alternate button clicks. In addition, each checkbutton monitors |
its associated variable and automatically selects and deselects itself when the variables value changes to and from the button's "on", |
"off" and "tristate" values.
The checkbutton command creates a new Tcl command whose name is pathName. This command may be used to invoke various operations on the
widget. It has the following general form:
pathName option ?arg arg ...?
Option and the args determine the exact behavior of the command. The following commands are possible for checkbutton widgets:
pathName cget option
Returns the current value of the configuration option given by option. Option may have any of the values accepted by the checkbut-
pathName configure ?option? ?value option value ...?
Query or modify the configuration options of the widget. If no option is specified, returns a list describing all of the available
options for pathName (see Tk_ConfigureInfo for information on the format of this list). If option is specified with no value, then
the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value
returned if no option is specified). If one or more option-value pairs are specified, then the command modifies the given widget
option(s) to have the given value(s); in this case the command returns an empty string. Option may have any of the values accepted
by the checkbutton command.
Deselects the checkbutton and sets the associated variable to its "off" value.
Flashes the checkbutton. This is accomplished by redisplaying the checkbutton several times, alternating between active and normal
colors. At the end of the flash the checkbutton is left in the same normal/active state as when the command was invoked. This com-
mand is ignored if the checkbutton's state is disabled.
Does just what would have happened if the user invoked the checkbutton with the mouse: toggle the selection state of the button and
invoke the Tcl command associated with the checkbutton, if there is one. The return value is the return value from the Tcl command,
or an empty string if there is no command associated with the checkbutton. This command is ignored if the checkbutton's state is
Selects the checkbutton and sets the associated variable to its "on" value.
Toggles the selection state of the button, redisplaying it and modifying its associated variable to reflect the new state.
Tk automatically creates class bindings for checkbuttons that give them the following default behavior:
 On Unix systems, a checkbutton activates whenever the mouse passes over it and deactivates whenever the mouse leaves the checkbut-
ton. On Mac and Windows systems, when mouse button 1 is pressed over a checkbutton, the button activates whenever the mouse pointer
is inside the button, and deactivates whenever the mouse pointer leaves the button.
 When mouse button 1 is pressed over a checkbutton, it is invoked (its selection state toggles and the command associated with the
button is invoked, if there is one).
 When a checkbutton has the input focus, the space key causes the checkbutton to be invoked. Under Windows, there are additional key
bindings; plus (+) and equal (=) select the button, and minus (-) deselects the button.
If the checkbutton's state is disabled then none of the above actions occur: the checkbutton is completely non-responsive.
The behavior of checkbuttons can be changed by defining new bindings for individual widgets or by redefining the class bindings.
This example shows a group of uncoupled checkbuttons.
labelframe .lbl -text "Steps:"
checkbutton .c1 -text Lights -variable lights
checkbutton .c2 -text Cameras -variable cameras
checkbutton .c3 -text Action! -variable action
pack .c1 .c2 .c3 -in .lbl
button(n), options(n), radiobutton(n), ttk::checkbutton(n)
Tk 4.4 checkbutton(n)