Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

pbs_mom(8b) [osx man page]

pbs_mom(8B)								PBS							       pbs_mom(8B)

pbs_mom - start a pbs batch execution mini-server SYNOPSIS
pbs_mom [-a alarm] [-C chkdirectory] [-c config] [-d directory] [-H hostname] [-L logfile] [-M MOMport] [-R RPPport] [-p|-q|-r] [-x] DESCRIPTION
The pbs_mom command starts the operation of a batch Machine Oriented Mini-server, MOM, on the local host. Typically, this command will be in a local boot file such as /etc/rc.local . To insure that the pbs_mom command is not runnable by the general user community, the server will only execute if its real and effective uid is zero. One function of pbs_mom is to place jobs into execution as directed by the server, establish resource usage limits, monitor the job's usage, and notify the server when the job completes. If they exist, pbs_mom will execute a prologue script before executing a job and an epilogue script after executing the job. The next function of pbs_mom is to respond to resource monitor requests. This was done by a sep- arate process in previous versions of PBS but has now been combined into one process. The resource monitor function is provided mainly for the PBS scheduler. It provides information about the status of running jobs, memory available etc. The next function of pbs_mom is to respond to task manager requests. This involves communicating with running tasks over a tcp socket as well as communicating with other MOMs within a job (aka a "sisterhood"). Pbs_mom will record a diagnostic message in a log file for any error occurrence. The log files are maintained in the mom_logs directory below the home directory of the server. If the log file cannot be opened, the diagnostic message is written to the system console. OPTIONS
-a alarm Used to specify the alarm timeout in seconds for computing a resource. Every time a resource request is processed, an alarm is set for the given amount of time. If the request has not completed before the given time, an alarm signal is gen- erated. The default is 5 seconds. -C chkdirectory Specifieds the path of the directory used to hold checkpoint files. [Currently this is only valid on Cray systems.] The default directory is PBS_HOME/spool/checkpoint, see the -d option. The directory specified with the -C option must be owned by root and accessible (rwx) only by root to protect the security of the checkpoint files. -c config Specify a alternative configuration file, see description below. If this is a relative file name it will be relative to PBS_HOME/mom_priv, see the -d option. If the specified file cannot be opened, pbs_mom will abort. If the -c option is not supplied, pbs_mom will attempt to open the default configuration file "config" in PBS_HOME/mom_priv. If this file is not present, pbs_mom will log the fact and continue. -H hostname Set MOM's hostname. This can be useful on multi-homed networks. -d directory Specifies the path of the directory which is the home of the servers working files, PBS_HOME. This option is typically used along with -M when debugging MOM. The default directory is given by $PBS_SERVER_HOME which is typically /usr/spool/PBS. -L logfile Specify an absolute path name for use as the log file. If not specified, MOM will open a file named for the current date in the PBS_HOME/mom_logs directory, see the -d option. -M port Specifies the port number on which the mini-server (MOM) will listen for batch requests. -R port Specifies the port number on which the mini-server (MOM) will listen for resource monitor requests, task manager requests and inter-MOM messages. Both a UDP and a TCP port of this number will be used. -p (Default after version 2.4.0) (Preserve running jobs) -- Specifies the impact on jobs which were in execution when the mini-server shut-down. The -p option tries to preserve any running jobs when the MOM restarts. The new mini-server will not be the parent of any running jobs, MOM has lost control of her offspring (not a new situation for a mother). The MOM will allow the jobs to continue to run and monitor them indirectly via polling. All recovered jobs will report an exit code of 0 when they are complete. The -p option is mutually exclusive with the -r, -P and -q options. -P (Terminate all jobs and remove them from the queue) -- Specifies the impact on jobs which were in execution when the mini- server shut-down. With the -P option, it is assumed that either the entire system has been restarted or the MOM has been down so long that it can no longer guarantee that the pid of any running process is the same as the recorded job process pid of a recovering job. Unlike the -p option no attempt is made to try and preserve or recover running jobs. All jobs are terminated and removed from the queue. The -q option is mutually exclusive with the -p, -q and -r options. -q (Requeue all jobs - This is the default behavior in versions prior to 2.4.0) -- Specifies the impact on jobs which were in execution when the mini-servershut-down. Do not terminate running processes. With the -q option, it is assumed that either the entire system has been restarted or the MOM has been down so long that it can no longer guarantee that the pid of any running process is the same as the recorded job process pid of a recovering job. No attempt is made to kill job processes. The MOM will mark the jobs as terminated and notify the batch server which owns the job. Re-runnable jobs will be requeued. The -q option is mutually exclusive with the -p, -P and -r options. -r (Terminate running processes and requeue all jobs) -- Specifies the impact on jobs which were in execution when the mini- server shut-down. With the -r option, MOM will kill any processes belonging to running jobs, mark the jobs as terminated and notify the batch server that owns the job. Re-runnable jobs are reset to a queued state so they can be run again. The -r option is mutually exclusive with the -p, -P and -q options. If the -r option is used following a reboot, process IDs (pids) may be reused and MOM may kill a process that is not a batch session. -S port Specifies the port number on which the pbs_server is listening for requests. If pbs_server is started with a -p option, pbs_mom will need to use the -S option and match the port value which was used to start pbs_server. -x Disables the check for privileged port resource monitor connections. This is used mainly for testing since the privileged port is the only mechanism used to prevent any ordinary user from connecting. CONFIGURATION FILE
The configuration file may be specified on the command line at program start with the -c flag. The use of this file is to provide several types of run time information to pbs_mom: static resource names and values, external resources provided by a program to be run on request via a shell escape, and values to pass to internal set up functions at initialization (and re-initialization). Each item type is on a single line with the component parts separated by white space. If the line starts with a hash mark (pound sign, #), the line is considered to be a comment and is skipped. Static Resources For static resource names and values, the configuration file contains a list of resource names/values pairs, one pair per line and separated by white space. An Example of static resource names and values could be the number of tape drives of different types and could be specified by tape3480 4 tape3420 2 tapedat 1 tape8mm 1 Shell Commands If the first character of the value is an exclamation mark (!), the entire rest of the line is saved to be executed through the ser- vices of the system(3) standard library routine. The shell escape provides a means for the resource monitor to yield arbitrary information to the scheduler. Parameter substitution is done such that the value of any qualifier sent with the query, as explained below, replaces a token with a percent sign (%) fol- lowed by the name of the qualifier. For example, here is a configuration file line which gives a resource name of "escape": escape !echo %xxx %yyy If a query for "escape" is sent with no qualifiers, the command executed would be "echo %xxx %yyy". If one qualifier is sent, "escape[xxx=hi there]", the command executed would be "echo hi there %yyy". If two qualifiers are sent, "escape[xxx=hi][yyy=there]", the command executed would be "echo hi there". If a qualifier is sent with no matching token in the command line, "escape[zzz=snafu]", an error is reported. size[fs=<FS>] Specifies that the available and configured disk space in the <FS> filesystem is to be reported to the pbs_server and scheduler. NOTE: To request disk space on a per job basis, specify the file resource as in 'qsub -l nodes=1,file=1000kb' For example, the available and configured disk space in the /localscratch filesystem will be reported: size[fs=/localscratch] Initialization Value An initialization value directive has a name which starts with a dollar sign ($) and must be known to MOM via an internal table. The entries in this table now are: pbsserver which defines hostnames running pbs_server that will be allowed to submit jobs, issue Resource Monitor (RM) requests, and get status updates. MOM will continually attempt to contact all server hosts for node status and state updates. Like $PBS_SERVER_HOME/server_name, the hostname may be followed by a colon and a port number. This parameter replaces the oft- confused $clienthost parameter from TORQUE 2.0.0p0 and earlier. Note that the hostname in $PBS_SERVER_HOME/server_name is used if no $pbsserver parameters are found pbsclient which causes a host name to be added to the list of hosts which will be allowed to connect to MOM as long as they are using a privilaged port for the purposes of resource monitor requests. For example, here are two configuration file lines which will allow the hosts "fred" and "wilma" to connect: $pbsclient fred $pbsclient wilma Two host name are always allowed to connection to pbs_mom, "localhost" and the name returned to pbs_mom by the system call gethostname(). These names need not be specified in the configuration file. The hosts listed as "clients" can issue Resource Monitor (RM) requests. Other MOM nodes and servers do not need to be listed as clients. restricted which causes a host name to be added to the list of hosts which will be allowed to connect to MOM without needing to use a privilaged port. These names allow for wildcard matching. For example, here is a configuration file line which will allow queries from any host from the domain "". $restricted * The restriction which applies to these connections is that only internal queries may be made. No resources from a config file will be found. This is to prevent any shell commands from being run by a non-root process. This parameter is generally not required except for some versions of OSX. logevent which sets the mask that determines which event types are logged by pbs_mom. For example: $logevent 0x1fff $logevent 255 The first example would set the log event mask to 0x1ff(511) which enables logging of all events including debug events. The second example would set the mask to 0x0ff(255) which enables all events except debug events. cputmult which sets a factor used to adjust cpu time used by a job. This is provided to allow adjustment of time charged and limits enforced where the job might run on systems with different cpu performance. If Mom's system is faster than the reference system, set cputmult to a decimal value greater than 1.0. If Mom's system is slower, set cputmult to a value between 1.0 and 0.0. For example: $cputmult 1.5 $cputmult 0.75 usecp specifies which directories should be staged with cp instead of rcp/scp. If a shared filesystem is available on all hosts in a cluster, this directive is used to make these filesystems known to MOM. For example, if /home is NFS mounted on all nodes in a cluster: $usecp *:/home /home wallmult which sets a factor used to adjust wall time usage by to job to a common reference system. The factor is used for walltime calculations and limits the same as cputmult is used for cpu time. configversion specifies the version of the config file data, a string. check_poll_time specifies the MOM interval in seconds. MOM checks each job for updated resource usages, exited processes, over-limit condi- tions, etc. once per interval. This value should be equal or lower to pbs_server's job_stat_rate. High values result in stale information reported to pbs_server. Low values result in increased system usage by MOM. Default is 45 seconds. down_on_error causes MOM to report itself as state "down" to pbs_server in the event of a failed health check. This feature is EXPERIMEN- TAL and likely to be removed in the future. See HEALTH CHECK below. ideal_load ideal processor load. Represents a low water mark for the load average. Nodes that are currently busy will consider itself free after falling below ideal_load. auto_ideal_load if jobs are running, sets idea_load based on a simple expression. The expressions start with the variable 't' (total assigned CPUs) or 'c' (existing CPUs), an operator (+ - / *), and followed by a float constant. $auto_ideal_load t-0.2 loglevel specifies the verbosity of logging with higher numbers specifying more verbose logging. Values may range between 0 and 7. log_file_max_size If this is set to a value > 0 then pbs_mom will roll the current log file to log-file-name.1 when its size is greater than or equal to the value of log_file_max_size. This value is interpreted as kilobytes. log_file_roll_depth If this is set to a value >=1 and log_file_max_size is set then pbs_mom will continue rolling the log files to log-file- name.log_file_roll_depth. max_load maximum processor load. Nodes over this load average are considered busy (see ideal_load above). auto_max_load if jobs are running, sets max_load based on a simple expression. The expressions start with the variable 't' (total assigned CPUs) or 'c' (existing CPUs), an operator (+ - / *), and followed by a float constant. enablemomrestart enable automatic restarts of MOM. If enabled, MOM will check if its binary has been updated and restart itself at a safe point when no jobs are running; thus making upgrades easier. The check is made by comparing the mtime of the pbs_mom exe- cutable. Command-line args, the process name, and the PATH env variable are preserved across restarts. It is recommended that this not be enabled in the config file, but enabled when desired with momctl (see RESOURCES for more information.) node_check_script specifies the fully qualified pathname of the health check script to run (see HEALTH CHECK for more information). node_check_interval specifies when to run the MOM health check. The check can be either periodic, event-driver, or both. The value starts with an integer specifying the number of MOM intervals between subsequent executions of the specified health check. After the integer is an optional comma-separated list of event names. Currently supported are "jobstart" and "jobend". This value defaults to 1 with no events indicating the check is run every MOM interval. (see HEALTH CHECK for more information) $node_check_interval 0Disabled. $node_check_interval 0,jobstartOnly $node_check_interval 10,jobstart,jobend prologalarm Specifies maximum duration (in seconds) which the MOM will wait for the job prolog or job job epilog to complete. This parameter default to 300 seconds (5 minutes) rcpcmd Specify the the full path and argument to be used for remote file copies. This overrides the compile-time default found in configure. This must contain 2 words: the full path to the command and the switches. The copy command must be able to recursively copy files to the remote host and accept arguments of the form "user@host:files" For example: $rcpcmd /usr/bin/rcp -rp $rcpcmd /usr/bin/scp -rpB remote_checkpoint_dirs Specifies what server checkpoint directories are remotely mounted. This directive is used to tell the MOM which directories are shared with the server. Using remote checkpoint directories eliminates the need to copy the checkpoint files back and forth between the MOM and the server. This parameter is available in 2.4.1 and later. $remote_checkpoint_dirs /var/spool/torque/checkpoint remote_reconfig Enables the ability to remotely reconfigure pbs_mom with a new config file. Default is disabled. This parameter accepts various forms of true, yes, and 1. timeout Specifies the number of seconds before TCP messages will time out. TCP messages include job obituaries, and TM requests if RPP is disabled. Default is 60 seconds. tmpdir Sets the directory basename for a per-job temporary directory. Before job launch, MOM will append the jobid to the tmpdir basename and create the directory. After the job exit, MOM will recursively delete it. The env variable TMPDIR will be set for all pro/epilog scripts, the job script, and TM tasks. Directory creation and removal is done as the job owner and group, so the owner must have write permission to create the directory. If the directory already exists and is owned by the job owner, it will not be deleted after the job. If the directory already exists and is NOT owned by the job owner, the job start will be rejected. status_update_time Specifies (in seconds) how often MOM updates its status information to pbs_server. This value should correlate with the server's scheduling interval. High values increase the load of pbs_server and the network. Low values cause pbs_server to report stale information. Default is 45 seconds. varattr This is similar to a shell escape above, but includes a TTL. The command will only be run every TTL seconds. A TTL of -1 will cause the command to be executed only once. A TTL of 0 will cause the command to be run everytime varattr is requested. This parameter may be used multiple times, but all output will be grouped into a single "varattr" attribute in the request and status output. The command should output data in the form of varattrname=va1ue1[+value2]... $varattr 3600 /path/to/script [<ARGS>]... The configuration file must be executable and "secure". It must be owned by a user id and group id less than 10 and not be world writable. Output from this file must be in the format $VAR=$VAL, i.e., dataset13=20070104 dataset22=20070202 viraltest=abdd3 xauthpath Specifies the path to the xauth binary to enable X11 fowarding. ignvmem If set to true, then pbs_mom will ignore vmem/pvmem limit enforcement. ignwalltime If set to true, then pbs_mom will ignore walltime limit enforcement. mom_host Sets the local hostname as used by pbs_mom. RESOURCES
Resource Monitor queries can be made with momctl's -q option to retrieve and set pbs_mom options. Any configured static resource may be retrieved with a request of the same name. These are resource requests not otherwise documented in the PBS ERS. cycle forces an immediate MOM cycle status_update_time retrieve or set the $status_update_time parameter check_poll_time retrieve or set the $check_poll_time parameter configversion retrieve the config version jobstartblocktime retrieve or set the $jobstartblocktime parameter enablemomrestart retrieve or set the $enablemomrestart parameter loglevel retrieve or set the $loglevel parameter down_on_error retrieve or set the EXPERIMENTAL $down_on_error parameter diag0 - diag4 retrieves various diagnostic information rcpcmd retrieve or set the $rcpcmd parameter version retrieves the pbs_mom version HEALTH CHECK
The health check script is executed directly by the pbs_mom daemon under the root user id. It must be accessible from the compute node and may be a script or compiled executable program. It may make any needed system calls and execute any combination of system utilities but should not execute resource manager client commands. Also, as of TORQUE 1.0.1, the pbs_mom daemon blocks until the health check is com- pleted and does not possess a built-in timeout. Consequently, it is advisable to keep the launch script execution time short and verify that the script will not block even under failure conditions. If the script detects a failure, it should return the keyword 'ERROR' to stdout followed by an error message. The message (up to 256 char- acters) immediately following the ERROR string will be assigned to the node attribute 'message' of the associated node. If the script detects a failure when run from "jobstart", then the job will be rejected. This should probably only be used with advanced schedulers like Moab so that the job can be routed to another node. TORQUE currently ignores ERROR messages by default, but advanced schedulers like moab can be configured to react appropriately. If the experimental $down_on_error MOM setting is enabled, MOM will set itself to state down and report to pbs_server; and pbs_server will report the node as "down". Additionally, the experimental "down_on_error" server attribute can be enabled which has the same effect but moves the decision to pbs_server. It is redundant to have MOM's $down_on_error and pbs_server's down_on_error features enabled. See "down_on_error" in pbs_server_attributes(7B). FILES
$PBS_SERVER_HOME/server_name contains the hostname running pbs_server. $PBS_SERVER_HOME/mom_priv the default directory for configuration files, typically (/usr/spool/pbs)/mom_priv. $PBS_SERVER_HOME/mom_logs directory for log files recorded by the server. $PBS_SERVER_HOME/mom_priv/prologue the administrative script to be run before job execution. $PBS_SERVER_HOME/mom_priv/epilogue the administrative script to be run after job execution. SIGNAL HANDLING
pbs_mom handles the following signals: SIGHUP causes pbs_mom to re-read its configuration file, close and reopen the log file, and reinitialize resource structures. SIGALRM results in a log file entry. The signal is used to limit the time taken by certain children processes, such as the prologue and epi- logue. SIGINT and SIGTERM results in pbs_mom exiting without terminating any running jobs. This is the action for the following signals as well: SIGXCPU, SIGXFSZ, SIGCPULIM, and SIGSHUTDN. SIGUSR1, SIGUSR2 causes MOM to increase and decrease logging levels, respectively. SIGPIPE, SIGINFO are ignored. SIGBUS, SIGFPE, SIGILL, SIGTRAP, and SIGSYS cause a core dump if the PBSCOREDUMP environmental variable is defined. All other signals have their default behavior installed. EXIT STATUS
If the mini-server command fails to begin operation, the server exits with a value greater than zero. SEE ALSO
pbs_server(8B), pbs_scheduler_basl(8B), pbs_scheduler_tcl(8B), the PBS External Reference Specification, and the PBS Administrator's Guide. Local pbs_mom(8B)
Man Page