LVMDISKSCAN(8) System Manager's Manual LVMDISKSCAN(8)NAME
lvmdiskscan - scan for all devices visible to LVM2
lvmdiskscan [-d|--debug] [-h|-?|--help] [-l|--lvmpartition] [-v|--verbose]
lvmdiskscan scans all SCSI, (E)IDE disks, multiple devices and a bunch of other block devices in the system looking for LVM physical vol-
umes. The size reported is the real device size. Define a filter in lvm.conf(5) to restrict the scan to avoid a CD ROM, for example.
See lvm for common options.
Only reports Physical Volumes.
SEE ALSO lvm(8), lvm.conf(5), pvscan(8), vgscan(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) LVMDISKSCAN(8)
Check Out this Related Man Page
PVSCAN(8) System Manager's Manual PVSCAN(8)NAME
pvscan - scan all disks for physical volumes
pvscan [-d|--debug] [-h|--help] [-v|--verbose] [--version] [--ignorelockingfailure] [-e|--exported] [-n|--novolumegroup] [-s|--short]
pvscan [-d|--debug] [-h|--help] --cache [--major major --minor minor | DevicePath ] ...
pvscan scans all supported LVM block devices in the system for physical volumes.
See lvm(8) for common options.
Only show physical volumes belonging to exported volume groups.
Only show physical volumes not belonging to any volume group.
Short listing format.
Show UUIDs (Uniform Unique Identifiers) in addition to device special names.
--cache [ --major major --minor minor | DevicePath ] ...
Scan one or more devices and instruct the lvmetad daemon to update its cached state accordingly. Called internally by udev rules.
All devices listed explicitly are processed regardless of any device filters set in lvm.conf.
SEE ALSO lvm(8), pvcreate(8), pvdisplay(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) PVSCAN(8)
Hi, I work offshore and we have a system that records excessive amounts of data (Terabytes), therefore we changed the 16 x 400GB drives to 16 x 1TB drives. However, since doing this, upon bootup, the system does not recognize the new drives. These drives are external drives in a chassis which is... (5 Replies)
Hi there all, *again* :P
well I have a problem.
I added a new HD in my system specially for my VMachines.
in the bios I see the HD come up (its an old IDE HD that is inserted as slave)
So I would think that I should see him as /dev/hdb
but I dont see him at all in fdisk or what so ever.
I... (3 Replies)
I'm new to Linux 5, going through initial phases of installation and setting up devices, etc,, and much to my surprise discovered also an existence of a 2nd hard drive to try to initialize and partition perhaps using any built-in command i.e. "fdisk" or similar, but I couldn't get the command to... (4 Replies)
We have an issue here:
The libc.so.6 file (link) is corrupted and it causes the system unbootable. It even doesn't boot to single user mode. How can we boot the system to fix the library file? Or is there any other solutions for this issue?
Here are some boot messages:... (6 Replies)
I wanted to know how we can combine volumes over 2 physical drives.
# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ... (16 Replies)
I have a server booted into sysresccd (mini-linux OS) with 1 40 GB disk attached
I am trying to create a volume group and restore another server into the new one
However, when I try to create a partition for /boot it seems that my VG in LVM is not recognized anymore
These are the... (2 Replies)
Need a bit of help on this one as I am a scripting noob.
I have a linux based NAS that mounts USB hard drives in an inconsistent location and to make matters worse, seems to lose the mount for an unknown reason and doesn't remount automatically unless the drive is removed and re-inserted.... (4 Replies)
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i... (5 Replies)