xpdfrc(5) File Formats Manual xpdfrc(5)
NAME
xpdfrc - configuration file for Xpdf tools (version 3.03)
DESCRIPTION
All of the Xpdf tools read a single configuration file. If you have a .xpdfrc file in your home directory, it will be read. Otherwise, a
system-wide configuration file will be read from /etc/xpdf/xpdfrc, if it exists. (This is its default location; depending on build
options, it may be placed elsewhere.) On Win32 systems, the xpdfrc file should be placed in the same directory as the executables.
The xpdfrc file consists of a series of configuration options, one per line. Blank lines and lines starting with a '#' (comments) are
ignored.
The following sections list all of the configuration options, sorted into functional groups. There is an examples section at the end.
Note that all settings are case-sensitive; in particular, boolean options are "yes" and "no" (rather than "Yes" or "No").
INCLUDE FILES
include config-file
Includes the specified config file. The effect of this is equivalent to inserting the contents of config-file directly into the
parent config file in place of the include command. Config files can be nested arbitrarily deeply.
CHARACTER MAPPING
nameToUnicode map-file
Specifies a file with the mapping from character names to Unicode. This is used to handle PDF fonts that have valid encodings but
no ToUnicode entry. Each line of a nameToUnicode file looks like this:
hex-string name
The hex-string is the Unicode (UCS-2) character index, and name is the corresponding character name. Multiple nameToUnicode files
can be used; if a character name is given more than once, the code in the last specified file is used. There is a built-in default
nameToUnicode table with all of Adobe's standard character names.
cidToUnicode registry-ordering map-file
Specifies the file with the mapping from character collection to Unicode. Each line of a cidToUnicode file represents one charac-
ter:
hex-string
The hex-string is the Unicode (UCS-2) index for that character. The first line maps CID 0, the second line CID 1, etc. File size
is determined by size of the character collection. Only one file is allowed per character collection; the last specified file is
used. There are no built-in cidToUnicode mappings.
unicodeToUnicode font-name-substring map-file
This is used to work around PDF fonts which have incorrect Unicode information. It specifies a file which maps from the given
(incorrect) Unicode indexes to the correct ones. The mapping will be used for any font whose name contains font-name-substring.
Each line of a unicodeToUnicode file represents one Unicode character:
in-hex out-hex1 out-hex2 ...
The in-hex field is an input (incorrect) Unicode index, and the rest of the fields are one or more output (correct) Unicode indexes.
Each occurrence of in-hex will be converted to the specified output sequence.
unicodeMap encoding-name map-file
Specifies the file with mapping from Unicode to encoding-name. These encodings are used for text output (see below). Each line of
a unicodeMap file represents a range of one or more Unicode characters which maps linearly to a range in the output encoding:
in-start-hex in-end-hex out-start-hex
Entries for single characters can be abbreviated to:
in-hex out-hex
The in-start-hex and in-end-hex fields (or the single in-hex field) specify the Unicode range. The out-start-hex field (or the
out-hex field) specifies the start of the output encoding range. The length of the out-start-hex (or out-hex) string determines the
length of the output characters (e.g., UTF-8 uses different numbers of bytes to represent characters in different ranges). Entries
must be given in increasing Unicode order. Only one file is allowed per encoding; the last specified file is used. The Latin1,
ASCII7, Symbol, ZapfDingbats, UTF-8, and UCS-2 encodings are predefined.
cMapDir registry-ordering dir
Specifies a search directory, dir, for CMaps for the registry-ordering character collection. There can be multiple directories for
a particular collection. There are no default CMap directories.
toUnicodeDir dir
Specifies a search directory, dir, for ToUnicode CMaps. There can be multiple ToUnicode directories. There are no default ToUni-
code directories.
GENERAL FONT CONFIGURATION
fontFile PDF-font-name font-file
Maps a PDF font, PDF-font-name, to a font for display or PostScript output. The font file, font-file, can be any type allowed in a
PDF file. This command can be used for 8-bit or 16-bit (CID) fonts.
fontDir dir
Specifies a search directory for font files. There can be multiple fontDir commands; all of the specified directories will be
searched in order. The font files can be Type 1 (.pfa or .pfb) or TrueType (.ttf or .ttc); other files in the directory will be
ignored. The font file name (not including the extension) must exactly match the PDF font name. This search is performed if the
font name doesn't match any of the fonts declared with the fontFile command. There are no default fontDir directories.
fontFileCC registry-ordering font-file
Maps the registry-ordering character collection to a font for display or PostScript output. This mapping is used if the font name
doesn't match any of the fonts declared with the fontFile, fontDir, psResidentFont16, or psResidentFontCC commands.
POSTSCRIPT FONT CONFIGURATION
psFontPassthrough yes | no
If set to "yes", pass 8-bit font names through to the PostScript output without substitution. Fonts which are not embedded in the
PDF file are expected to be available on the printer. This defaults to "no".
psResidentFont PDF-font-name PS-font-name
When the 8-bit font PDF-font-name is used (without embedding) in a PDF file, it will be translated to the PostScript font
PS-font-name, which is assumed to be resident in the printer. Typically, PDF-font-name and PS-font-name are the same. By default,
only the Base-14 fonts are assumed to be resident.
psResidentFont16 PDF-font-name wMode PS-font-name encoding
When the 16-bit (CID) font PDF-font-name with writing mode wMode is used (without embedding) in a PDF file, it will be translated to
the PostScript font PS-font-name, which is assumbed to be resident in the printer. The writing mode must be either 'H' for horizon-
tal or 'V' for vertical. The resident font is assumed to use the specified encoding (which must have been defined with the uni-
codeMap command).
psResidentFontCC registry-ordering wMode PS-font-name encoding
When a 16-bit (CID) font using the registry-ordering character collection and wMode writing mode is used (without embedding) in a
PDF file, the PostScript font, PS-font-name, is substituted for it. The substituted font is assumbed to be resident in the printer.
The writing mode must be either 'H' for horizontal or 'V' for vertical. The resident font is assumed to use the specified encoding
(which must have been defined with the unicodeMap command).
psEmbedType1Fonts yes | no
If set to "no", prevents embedding of Type 1 fonts in generated PostScript. This defaults to "yes".
psEmbedTrueTypeFonts yes | no
If set to "no", prevents embedding of TrueType fonts in generated PostScript. This defaults to "yes".
psEmbedCIDTrueTypeFonts yes | no
If set to "no", prevents embedding of CID TrueType fonts in generated PostScript. For Level 3 PostScript, this generates a CID
font, for lower levels it generates a non-CID composite font. This defaults to "yes".
psEmbedCIDPostScriptFonts yes | no
If set to "no", prevents embedding of CID PostScript fonts in generated PostScript. For Level 3 PostScript, this generates a CID
font, for lower levels it generates a non-CID composite font. This defaults to "yes".
POSTSCRIPT CONTROL
psPaperSize width(pts) height(pts)
Sets the paper size for PostScript output. The width and height parameters give the paper size in PostScript points (1 point = 1/72
inch).
psPaperSize letter | legal | A4 | A3 | match
Sets the paper size for PostScript output to a standard size. The default paper size is set when xpdf and pdftops are built, typi-
cally to "letter" or "A4". This can also be set to "match", which will set the paper size to match the size specified in the PDF
file.
psImageableArea llx lly urx ury
Sets the imageable area for PostScript output. The four integers are the coordinates of the lower-left and upper-right corners of
the imageable region, specified in points (with the origin being the lower-left corner of the paper). This defaults to the full
paper size; the psPaperSize option will reset the imageable area coordinates.
psCrop yes | no
If set to "yes", PostScript output is cropped to the CropBox specified in the PDF file; otherwise no cropping is done. This
defaults to "yes".
psExpandSmaller yes | no
If set to "yes", PDF pages smaller than the PostScript imageable area are expanded to fill the imageable area. Otherwise, no scall-
ing is done on smaller pages. This defaults to "no".
psShrinkLarger yes | no
If set to yes, PDF pages larger than the PostScript imageable area are shrunk to fit the imageable area. Otherwise, no scaling is
done on larger pages. This defaults to "yes".
psCenter yes | no
If set to yes, PDF pages smaller than the PostScript imageable area (after any scaling) are centered in the imageable area. Other-
wise, they are aligned at the lower-left corner of the imageable area. This defaults to "yes".
psDuplex yes | no
If set to "yes", the generated PostScript will set the "Duplex" pagedevice entry. This tells duplex-capable printers to enable
duplexing. This defaults to "no".
psLevel level1 | level1sep | level2 | level2sep | level3 | level3Sep
Sets the PostScript level to generate. This defaults to "level2".
psPreload yes | no
If set to "yes", PDF forms are converted to PS procedures, and image data is preloaded. This uses more memory in the PostScript
interpreter, but generates significantly smaller PS files in situations where, e.g., the same image is drawn on every page of a long
document. This defaults to "no".
psOPI yes | no
If set to "yes", generates PostScript OPI comments for all images and forms which have OPI information. This option is only avail-
able if the Xpdf tools were compiled with OPI support. This defaults to "no".
psASCIIHex yes | no
If set to "yes", the ASCIIHexEncode filter will be used instead of ASCII85Encode for binary data. This defaults to "no".
psUncompressPreloadedImages yes | no
If set to "yes", all preloaded images in PS files will uncompressed. If set to "no", the original compressed images will be used
when possible. The "yes" setting is useful to work around certain buggy PostScript interpreters. This defaults to "no".
psRasterResolution float
Set the resolution (in dpi) for rasterized pages in PostScript output. (Pdftops will rasterize pages which use transparency.) This
defaults to 300.
psRasterMono yes | no
If set to "yes", rasterized pages in PS files will be monochrome (8-bit gray) instead of color. This defaults to "no".
psAlwaysRasterize yes | no
If set to "yes", all PostScript output will be rasterized. This defaults to "no".
psFile file-or-command
Sets the default PostScript file or print command for xpdf. Commands start with a '|' character; anything else is a file. If the
file name or command contains spaces it must be quoted. This defaults to unset, which tells xpdf to generate a name of the form
<file>.ps for a PDF file <file>.pdf.
fontDir dir
See the description above, in the DISPLAY FONTS section.
TEXT CONTROL
textEncoding encoding-name
Sets the encoding to use for text output. (This can be overridden with the "-enc" switch on the command line.) The encoding-name
must be defined with the unicodeMap command (see above). This defaults to "Latin1".
textEOL unix | dos | mac
Sets the end-of-line convention to use for text output. The options are:
unix = LF
dos = CR+LF
mac = CR
(This can be overridden with the "-eol" switch on the command line.) The default value is based on the OS where xpdf and pdftotext
were built.
textPageBreaks yes | no
If set to "yes", text extraction will insert page breaks (form feed characters) between pages. This defaults to "yes".
textKeepTinyChars yes | no
If set to "yes", text extraction will keep all characters. If set to "no", text extraction will discard tiny (smaller than 3 point)
characters after the first 50000 per page, avoiding extremely slow run times for PDF files that use special fonts to do shading or
cross-hatching. This defaults to "no".
MISCELLANEOUS SETTINGS
initialZoom percentage | page | width | height
Sets the initial zoom factor. A number specifies a zoom percentage, where 100 means 72 dpi. You may also specify 'page', to fit
the page to the window size, 'width', to fit the page width to the window width, or 'height', to fit the page height to the window
height.
continuousView yes | no
If set to "yes", xpdf will start in continuous view mode, i.e., with one vertical screoll bar for the whole document. This defaults
to "no".
enableT1lib yes | no
Enables or disables use of t1lib (a Type 1 font rasterizer). This is only relevant if the Xpdf tools were built with t1lib support.
("enableT1lib" replaces the old "t1libControl" option.) This option defaults to "yes".
enableFreeType yes | no
Enables or disables use of FreeType (a TrueType / Type 1 font rasterizer). This is only relevant if the Xpdf tools were built with
FreeType support. ("enableFreeType" replaces the old "freetypeControl" option.) This option defaults to "yes".
enableFreeType yes | no
Enables or disables use of FreeType (a TrueType / Type 1 font rasterizer). This is only relevant if the Xpdf tools were built with
FreeType support. ("enableFreeType" replaces the old "freetypeControl" option.) This option defaults to "yes".
disableFreeTypeHinting yes | no
If this is set to "yes", FreeType hinting will be forced off. This option defaults to "no".
antialias yes | no
Enables or disables font anti-aliasing in the PDF rasterizer. This option affects all font rasterizers. ("antialias" replaces the
anti-aliasing control provided by the old "t1libControl" and "freetypeControl" options.) This default to "yes".
vectorAntialias yes | no
Enables or disables anti-aliasing of vector graphics in the PDF rasterizer. This defaults to "yes".
antialiasPrinting yes | no
If this is "yes", bitmaps sent to the printer will be antialiased (according to the "antialias" and "vectorAntialias" settings). If
this is "no", printed bitmaps will not be antialiased. This defaults to "no".
strokeAdjust yes | no
Enables or disables stroke adjustment. Stroke adjustment moves horizontal and vertical lines by up to half a pixel to make them
look "cleaner" when vector anti-aliasing is enabled. This defaults to "yes".
screenType dispersed | clustered | stochasticClustered
Sets the halftone screen type, which will be used when generating a monochrome (1-bit) bitmap. The three options are dispersed-dot
dithering, clustered-dot dithering (with a round dot and 45-degree screen angle), and stochastic clustered-dot dithering. By
default, "stochasticClustered" is used for resolutions of 300 dpi and higher, and "dispersed" is used for resolutions lower then 300
dpi.
screenSize integer
Sets the size of the (square) halftone screen threshold matrix. By default, this is 4 for dispersed-dot dithering, 10 for clus-
tered-dot dithering, and 100 for stochastic clustered-dot dithering.
screenDotRadius integer
Sets the halftone screen dot radius. This is only used when screenType is set to stochasticClustered, and it defaults to 2. In
clustered-dot mode, the dot radius is half of the screen size. Dispersed-dot dithering doesn't have a dot radius.
screenGamma float
Sets the halftone screen gamma correction parameter. Gamma values greater than 1 make the output brighter; gamma values less than 1
make it darker. The default value is 1.
screenBlackThreshold float
When halftoning, all values below this threshold are forced to solid black. This parameter is a floating point value between 0
(black) and 1 (white). The default value is 0.
screenWhiteThreshold float
When halftoning, all values above this threshold are forced to solid white. This parameter is a floating point value between 0
(black) and 1 (white). The default value is 1.
minLineWidth float
Set the minimum line width, in device pixels. This affects the rasterizer only, not the PostScript converter (except when it uses
rasterization to handle transparency). The default value is 0 (no minimum).
drawAnnotations yes | no
If set to "no", annotations will not be drawn or printed. The default value is "yes".
overprintPreview yes | no
If set to "yes", generate overprint preview output, honoring the OP/op/OPM settings in the PDF file. Ignored for non-CMYK output.
The default value is "no".
launchCommand command
Sets the command executed when you click on a "launch"-type link. The intent is for the command to be a program/script which deter-
mines the file type and runs the appropriate viewer. The command line will consist of the file to be launched, followed by any
parameters specified with the link. Do not use "%s" in "command". By default, this is unset, and Xpdf will simply try to execute
the file (after prompting the user).
urlCommand command
Sets the command executed when you click on a URL link. The string "%s" will be replaced with the URL. (See the example below.)
This has no default value.
movieCommand command
Sets the command executed when you click on a movie annotation. The string "%s" will be replaced with the movie file name. This
has no default value.
mapNumericCharNames yes | no
If set to "yes", the Xpdf tools will attempt to map various numeric character names sometimes used in font subsets. In some cases
this leads to usable text, and in other cases it leads to gibberish -- there is no way for Xpdf to tell. This defaults to "yes".
mapUnknownCharNames yes | no
If set to "yes", and mapNumericCharNames is set to "no", the Xpdf tools will apply a simple pass-through mapping (Unicode index =
character code) for all unrecognized glyph names. (For CID fonts, setting mapNumericCharNames to "no" is unnecessary.) In some
cases, this leads to usable text, and in other cases it leads to gibberish -- there is no way for Xpdf to tell. This defaults to
"no".
bind modifiers-key context command ...
Add a key or mouse button binding. Modifiers can be zero or more of:
shift-
ctrl-
alt-
Key can be a regular ASCII character, or any one of:
space
tab
return
enter
backspace
insert
delete
home
end
pgup
pgdn
left / right / up / down (arrow keys)
f1 .. f35 (function keys)
mousePress1 .. mousePress7 (mouse buttons)
mouseRelease1 .. mouseRelease7 (mouse buttons)
Context is either "any" or a comma-separated combination of:
fullScreen / window (full screen mode on/off)
continuous / singlePage (continuous mode on/off)
overLink / offLink (mouse over link or not)
scrLockOn / scrLockOff (scroll lock on/off)
The context string can include only one of each pair in the above list.
Command is an Xpdf command (see the COMMANDS section of the xpdf(1) man page for details). Multiple commands are separated by
whitespace.
The bind command replaces any existing binding, but only if it was defined for the exact same modifiers, key, and context. All
tokens (modifiers, key, context, commands) are case-sensitive.
Example key bindings:
# bind ctrl-a in any context to the nextPage
# command
bind ctrl-a any nextPage
# bind uppercase B, when in continuous mode
# with scroll lock on, to the reload command
# followed by the prevPage command
bind B continuous,scrLockOn reload prevPage
See the xpdf(1) man page for more examples.
unbind modifiers-key context
Removes a key binding established with the bind command. This is most useful to remove default key bindings before establishing new
ones (e.g., if the default key binding is given for "any" context, and you want to create new key bindings for multiple contexts).
printCommands yes | no
If set to "yes", drawing commands are printed as they're executed (useful for debugging). This defaults to "no".
errQuiet yes | no
If set to "yes", this suppresses all error and warning messages from all of the Xpdf tools. This defaults to "no".
EXAMPLES
The following is a sample xpdfrc file.
# from the Thai support package
nameToUnicode /usr/local/share/xpdf/Thai.nameToUnicode
# from the Japanese support package
cidToUnicode Adobe-Japan1 /usr/local/share/xpdf/Adobe-Japan1.cidToUnicode
unicodeMap JISX0208 /usr/local/share/xpdf/JISX0208.unicodeMap
cMapDir Adobe-Japan1 /usr/local/share/xpdf/cmap/Adobe-Japan1
# use the Base-14 Type 1 fonts from ghostscript
fontFile Times-Roman /usr/local/share/ghostscript/fonts/n021003l.pfb
fontFile Times-Italic /usr/local/share/ghostscript/fonts/n021023l.pfb
fontFile Times-Bold /usr/local/share/ghostscript/fonts/n021004l.pfb
fontFile Times-BoldItalic /usr/local/share/ghostscript/fonts/n021024l.pfb
fontFile Helvetica /usr/local/share/ghostscript/fonts/n019003l.pfb
fontFile Helvetica-Oblique /usr/local/share/ghostscript/fonts/n019023l.pfb
fontFile Helvetica-Bold /usr/local/share/ghostscript/fonts/n019004l.pfb
fontFile Helvetica-BoldOblique /usr/local/share/ghostscript/fonts/n019024l.pfb
fontFile Courier /usr/local/share/ghostscript/fonts/n022003l.pfb
fontFile Courier-Oblique /usr/local/share/ghostscript/fonts/n022023l.pfb
fontFile Courier-Bold /usr/local/share/ghostscript/fonts/n022004l.pfb
fontFile Courier-BoldOblique /usr/local/share/ghostscript/fonts/n022024l.pfb
fontFile Symbol /usr/local/share/ghostscript/fonts/s050000l.pfb
fontFile ZapfDingbats /usr/local/share/ghostscript/fonts/d050000l.pfb
# use the Bakoma Type 1 fonts
# (this assumes they happen to be installed in /usr/local/fonts/bakoma)
fontDir /usr/local/fonts/bakoma
# set some PostScript options
psPaperSize letter
psDuplex no
psLevel level2
psEmbedType1Fonts yes
psEmbedTrueTypeFonts yes
psFile "| lpr -Pprinter5"
# assume that the PostScript printer has the Univers and
# Univers-Bold fonts
psResidentFont Univers Univers
psResidentFont Univers-Bold Univers-Bold
# set the text output options
textEncoding UTF-8
textEOL unix
# misc options
enableT1lib yes
enableFreeType yes
launchCommand viewer-script
urlCommand "netscape -remote 'openURL(%s)'"
FILES
/etc/xpdf/xpdfrc
This is the default location for the system-wide configuration file. Depending on build options, it may be placed elsewhere.
$HOME/.xpdfrc
This is the user's configuration file. If it exists, it will be read in place of the system-wide file.
AUTHOR
The Xpdf software and documentation are copyright 1996-2011 Glyph & Cog, LLC.
SEE ALSO
xpdf(1), pdftops(1), pdftotext(1), pdfinfo(1), pdffonts(1), pdfdetach(1), pdftoppm(1), pdfimages(1)
http://www.foolabs.com/xpdf/
15 August 2011 xpdfrc(5)