ncakmod.conf(4) [osx man page]

ncakmod.conf(4) 						   File Formats 						   ncakmod.conf(4)

NAME

       ncakmod.conf - the ncakmod configuration file

SYNOPSIS

       /etc/nca/ncakmod.conf

DESCRIPTION

       The  ncakmod.conf  file is used to configure the Solaris Network Cache and Accelerator ("NCA") kernel module. The file contains two fields,
       key and value.

       The status key is used to indicate if the user wants to have NCA turned on as a feature.  If the value of status key is enabled,  then  the
       NCA  kernel  module  will be pushed on to the specified interfaces.  If the value of the status key is disabled, then the NCA kernel module
       will not be pushed on to any interfaces . The default is disabled.

       The httpd_door_path key specifies the path name of the Solaris Door RPC mechanism that will be used to communicate with	the  http  daemon.
       The default value is /var/run/nca_httpd_1.door.

       Use the nca_active key to indicate whether to allow NCA to actively open outgoing TCP connections. The default value for nca_active is dis-
       abled. If set to enabled, ncaconfd sets up NCA for each interface and then operates as a daemon, allowing NCA to make outgoing TCP  connec-
       tions. This functionality is possible only by using the doors interface to NCA. A web server that uses the sockets interface with PF_NCA or
       ncad_addr.so cannot connect by means of nca_active.

       NCA supports the logging of in-kernel cache hits. See ncalogd.conf(4). NCA stores logs in a binary format. Use the ncab2clf(1)  utility	to
       convert the log from a binary format to the Common Log File format.

       In order to implement changes to the ncakmod.conf file, you will need to reboot.

EXAMPLES

       Example 1: A Sample ncakmod.conf File

       The following is a sample ncakmod.conf file:

       #
       # NCA Kernel Module Configuration File
       #
       status=disabled
       httpd_door_path=/var/run/nca_httpd_1.door
       nca_active=disabled

FILES

       /etc/nca/ncakmod.conf	       The NCA kernel module configuration file.

ATTRIBUTES

       See attributes(5)  for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWncar			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       nca(1), ncab2clf(1), ncakmod(1), door_create(3DOOR), nca.if(4), ncad_addr(4), ncalogd.conf(4), attributes(5)

       System Administration Guide: IP Services

SunOS 5.10							    28 Sep 2001 						   ncakmod.conf(4)

ncakmod.conf(4)                                                    File Formats                                                    ncakmod.conf(4)

NAME

       ncakmod.conf - the ncakmod configuration file

SYNOPSIS

       /etc/nca/ncakmod.conf

DESCRIPTION

       The  ncakmod.conf  file is used to configure the Solaris Network Cache and Accelerator ("NCA") kernel module. The file contains two fields,
       key and value.

       The status key is used to indicate if the user wants to have NCA turned on as a feature.  If the value of status key is enabled,  then  the
       NCA  kernel  module  will be pushed on to the specified interfaces.  If the value of the status key is disabled, then the NCA kernel module
       will not be pushed on to any interfaces . The default is disabled.

       The httpd_door_path key specifies the path name of the Solaris Door RPC mechanism that will be used to communicate with  the  http  daemon.
       The default value is /var/run/nca_httpd_1.door.

       Use the nca_active key to indicate whether to allow NCA to actively open outgoing TCP connections. The default value for nca_active is dis-
       abled. If set to enabled, ncaconfd sets up NCA for each interface and then operates as a daemon, allowing NCA to make outgoing TCP  connec-
       tions. This functionality is possible only by using the doors interface to NCA. A web server that uses the sockets interface with PF_NCA or
       ncad_addr.so cannot connect by means of nca_active.

       NCA supports the logging of in-kernel cache hits. See ncalogd.conf(4). NCA stores logs in a binary format. Use the ncab2clf(1)  utility  to
       convert the log from a binary format to the Common Log File format.

       In order to implement changes to the ncakmod.conf file, you will need to reboot.

EXAMPLES

       Example 1: A Sample ncakmod.conf File

       The following is a sample ncakmod.conf file:

       #
       # NCA Kernel Module Configuration File
       #
       status=disabled
       httpd_door_path=/var/run/nca_httpd_1.door
       nca_active=disabled

FILES

       /etc/nca/ncakmod.conf           The NCA kernel module configuration file.

ATTRIBUTES

       See attributes(5)  for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWncar                     |
       +-----------------------------+-----------------------------+
       |Interface Stability          |Evolving                     |
       +-----------------------------+-----------------------------+

SEE ALSO

       nca(1), ncab2clf(1), ncakmod(1), door_create(3DOOR), nca.if(4), ncad_addr(4), ncalogd.conf(4), attributes(5)

       System Administration Guide: IP Services

SunOS 5.10                                                          28 Sep 2001                                                    ncakmod.conf(4)