PCREBUILD(3) Library Functions Manual PCREBUILD(3)
PCRE - Perl-compatible regular expressions
PCRE is distributed with a configure script that can be used to build the library in Unix-like environments using the applications known as
Autotools. Also in the distribution are files to support building using CMake instead of configure. The text file README contains general
information about building with Autotools (some of which is repeated below), and also has some comments about building on various operating
systems. There is a lot more information about building PCRE without using Autotools (including information about using CMake and building
"by hand") in the text file called NON-AUTOTOOLS-BUILD. You should consult this file as well as the README file if you are building in a
PCRE BUILD-TIME OPTIONS
The rest of this document describes the optional features of PCRE that can be selected when the library is compiled. It assumes use of the
configure script, where the optional features are selected or deselected by providing options to configure before running the make command.
However, the same options can be selected in both Unix-like and non-Unix-like environments using the GUI facility of cmake-gui if you are
using CMake instead of configure to build PCRE.
If you are not using Autotools or CMake, option selection can be done by editing the config.h file, or by passing parameter settings to the
compiler, as described in NON-AUTOTOOLS-BUILD.
The complete list of options for configure (which includes the standard ones such as the selection of the installation directory) can be
obtained by running
The following sections include descriptions of options whose names begin with --enable or --disable. These settings specify changes to the
defaults for the configure command. Because of the way that configure works, --enable and --disable always come in pairs, so the complemen-
tary option always exists as well, but as it specifies the default, it is not described.
BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES
By default, a library called libpcre is built, containing functions that take string arguments contained in vectors of bytes, either as
single-byte characters, or interpreted as UTF-8 strings. You can also build a separate library, called libpcre16, in which strings are con-
tained in vectors of 16-bit data units and interpreted either as single-unit characters or UTF-16 strings, by adding
to the configure command. You can also build yet another separate library, called libpcre32, in which strings are contained in vectors of
32-bit data units and interpreted either as single-unit characters or UTF-32 strings, by adding
to the configure command. If you do not want the 8-bit library, add
as well. At least one of the three libraries must be built. Note that the C++ and POSIX wrappers are for the 8-bit library only, and that
pcregrep is an 8-bit program. None of these are built if you select only the 16-bit or 32-bit libraries.
BUILDING SHARED AND STATIC LIBRARIES
The Autotools PCRE building process uses libtool to build both shared and static libraries by default. You can suppress one of these by
adding one of
to the configure command, as required.
By default, if the 8-bit library is being built, the configure script will search for a C++ compiler and C++ header files. If it finds
them, it automatically builds the C++ wrapper library (which supports only 8-bit strings). You can disable this by adding
to the configure command.
UTF-8, UTF-16 AND UTF-32 SUPPORT
To build PCRE with support for UTF Unicode character strings, add
to the configure command. This setting applies to all three libraries, adding support for UTF-8 to the 8-bit library, support for UTF-16 to
the 16-bit library, and support for UTF-32 to the to the 32-bit library. There are no separate options for enabling UTF-8, UTF-16 and
UTF-32 independently because that would allow ridiculous settings such as requesting UTF-16 support while building only the 8-bit library.
It is not possible to build one library with UTF support and another without in the same configuration. (For backwards compatibility,
--enable-utf8 is a synonym of --enable-utf.)
Of itself, this setting does not make PCRE treat strings as UTF-8, UTF-16 or UTF-32. As well as compiling PCRE with this option, you also
have have to set the PCRE_UTF8, PCRE_UTF16 or PCRE_UTF32 option (as appropriate) when you call one of the pattern compiling functions.
If you set --enable-utf when compiling in an EBCDIC environment, PCRE expects its input to be either ASCII or UTF-8 (depending on the run-
time option). It is not possible to support both EBCDIC and UTF-8 codes in the same version of the library. Consequently, --enable-utf and
--enable-ebcdic are mutually exclusive.
UNICODE CHARACTER PROPERTY SUPPORT
UTF support allows the libraries to process character codepoints up to 0x10ffff in the strings that they handle. On its own, however, it
does not provide any facilities for accessing the properties of such characters. If you want to be able to use the pattern escapes P, p,
and X, which refer to Unicode character properties, you must add
to the configure command. This implies UTF support, even if you have not explicitly requested it.
Including Unicode property support adds around 30K of tables to the PCRE library. Only the general category properties such as Lu and Nd
are supported. Details are given in the pcrepattern documentation.
JUST-IN-TIME COMPILER SUPPORT
Just-in-time compiler support is included in the build by specifying
This support is available only for certain hardware architectures. If this option is set for an unsupported architecture, a compile time
error occurs. See the pcrejit documentation for a discussion of JIT usage. When JIT support is enabled, pcregrep automatically makes use
of it, unless you add
to the "configure" command.
CODE VALUE OF NEWLINE
By default, PCRE interprets the linefeed (LF) character as indicating the end of a line. This is the normal newline character on Unix-like
systems. You can compile PCRE to use carriage return (CR) instead, by adding
to the configure command. There is also a --enable-newline-is-lf option, which explicitly specifies linefeed as the newline character.
Alternatively, you can specify that line endings are to be indicated by the two character sequence CRLF. If you want this, add
to the configure command. There is a fourth option, specified by
which causes PCRE to recognize any of the three sequences CR, LF, or CRLF as indicating a line ending. Finally, a fifth option, specified
causes PCRE to recognize any Unicode newline sequence.
Whatever line ending convention is selected when PCRE is built can be overridden when the library functions are called. At build time it is
conventional to use the standard for your operating system.
By default, the sequence R in a pattern matches any Unicode newline sequence, whatever has been selected as the line ending sequence. If
the default is changed so that R matches only CR, LF, or CRLF. Whatever is selected when PCRE is built can be overridden when the library
functions are called.
POSIX MALLOC USAGE
When the 8-bit library is called through the POSIX interface (see the pcreposix documentation), additional working storage is required for
holding the pointers to capturing substrings, because PCRE requires three integers per substring, whereas the POSIX interface provides only
two. If the number of expected substrings is small, the wrapper function uses space on the stack, because this is faster than using mal-
loc() for each call. The default threshold above which the stack is no longer used is 10; it can be changed by adding a setting such as
to the configure command.
HANDLING VERY LARGE PATTERNS
Within a compiled pattern, offset values are used to point from one part to another (for example, from an opening parenthesis to an alter-
nation metacharacter). By default, in the 8-bit and 16-bit libraries, two-byte values are used for these offsets, leading to a maximum size
for a compiled pattern of around 64K. This is sufficient to handle all but the most gigantic patterns. Nevertheless, some people do want
to process truly enormous patterns, so it is possible to compile PCRE to use three-byte or four-byte offsets by adding a setting such as
to the configure command. The value given must be 2, 3, or 4. For the 16-bit library, a value of 3 is rounded up to 4. In these libraries,
using longer offsets slows down the operation of PCRE because it has to load additional data when handling them. For the 32-bit library the
value is always 4 and cannot be overridden; the value of --with-link-size is ignored.
AVOIDING EXCESSIVE STACK USAGE
When matching with the pcre_exec() function, PCRE implements backtracking by making recursive calls to an internal function called match().
In environments where the size of the stack is limited, this can severely limit PCRE's operation. (The Unix environment does not usually
suffer from this problem, but it may sometimes be necessary to increase the maximum stack size. There is a discussion in the pcrestack
documentation.) An alternative approach to recursion that uses memory from the heap to remember data, instead of using recursive function
calls, has been implemented to work round the problem of limited stack size. If you want to build a version of PCRE that works this way,
to the configure command. With this configuration, PCRE will use the pcre_stack_malloc and pcre_stack_free variables to call memory manage-
ment functions. By default these point to malloc() and free(), but you can replace the pointers so that your own functions are used
Separate functions are provided rather than using pcre_malloc and pcre_free because the usage is very predictable: the block sizes
requested are always the same, and the blocks are always freed in reverse order. A calling program might be able to implement optimized
functions that perform better than malloc() and free(). PCRE runs noticeably more slowly when built in this way. This option affects only
the pcre_exec() function; it is not relevant for pcre_dfa_exec().
LIMITING PCRE RESOURCE USAGE
Internally, PCRE has a function called match(), which it calls repeatedly (sometimes recursively) when matching a pattern with the
pcre_exec() function. By controlling the maximum number of times this function may be called during a single matching operation, a limit
can be placed on the resources used by a single call to pcre_exec(). The limit can be changed at run time, as described in the pcreapi doc-
umentation. The default is 10 million, but this can be changed by adding a setting such as
to the configure command. This setting has no effect on the pcre_dfa_exec() matching function.
In some environments it is desirable to limit the depth of recursive calls of match() more strictly than the total number of calls, in
order to restrict the maximum amount of stack (or heap, if --disable-stack-for-recursion is specified) that is used. A second limit con-
trols this; it defaults to the value that is set for --with-match-limit, which imposes no additional constraints. However, you can set a
lower limit by adding, for example,
to the configure command. This value can also be overridden at run time.
CREATING CHARACTER TABLES AT BUILD TIME
PCRE uses fixed tables for processing characters whose code values are less than 256. By default, PCRE is built with a set of tables that
are distributed in the file pcre_chartables.c.dist. These tables are for ASCII codes only. If you add
to the configure command, the distributed tables are no longer used. Instead, a program called dftables is compiled and run. This outputs
the source for new set of tables, created in the default locale of your C run-time system. (This method of replacing the tables does not
work if you are cross compiling, because dftables is run on the local host. If you need to create alternative tables when cross compiling,
you will have to do so "by hand".)
USING EBCDIC CODE
PCRE assumes by default that it will run in an environment where the character code is ASCII (or Unicode, which is a superset of ASCII).
This is the case for most computer operating systems. PCRE can, however, be compiled to run in an EBCDIC environment by adding
to the configure command. This setting implies --enable-rebuild-chartables. You should only use it if you know that you are in an EBCDIC
environment (for example, an IBM mainframe operating system). The --enable-ebcdic option is incompatible with --enable-utf.
The EBCDIC character that corresponds to an ASCII LF is assumed to have the value 0x15 by default. However, in some EBCDIC environments,
0x25 is used. In such an environment you should use
as well as, or instead of, --enable-ebcdic. The EBCDIC character for CR has the same value as in ASCII, namely, 0x0d. Whichever of 0x15 and
0x25 is not chosen as LF is made to correspond to the Unicode NEL character (which, in Unicode, is 0x85).
The options that select newline behaviour, such as --enable-newline-is-cr, and equivalent run-time options, refer to these character values
in an EBCDIC environment.
PCREGREP OPTIONS FOR COMPRESSED FILE SUPPORT
By default, pcregrep reads all files as plain text. You can build it so that it recognizes files whose names end in .gz or .bz2, and reads
them with libz or libbz2, respectively, by adding one or both of
to the configure command. These options naturally require that the relevant libraries are installed on your system. Configuration will fail
if they are not.
PCREGREP BUFFER SIZE
pcregrep uses an internal buffer to hold a "window" on the file it is scanning, in order to be able to output "before" and "after" lines
when it finds a match. The size of the buffer is controlled by a parameter whose default value is 20K. The buffer itself is three times
this size, but because of the way it is used for holding "before" lines, the longest line that is guaranteed to be processable is the
parameter size. You can change the default parameter value by adding, for example,
to the configure command. The caller of pcregrep can, however, override this value by specifying a run-time option.
PCRETEST OPTION FOR LIBREADLINE SUPPORT
If you add
to the configure command, pcretest is linked with the libreadline library, and when its input is from a terminal, it reads it using the
readline() function. This provides line-editing and history facilities. Note that libreadline is GPL-licensed, so if you distribute a
binary of pcretest linked in this way, there may be licensing issues.
Setting this option causes the -lreadline option to be added to the pcretest build. In many operating environments with a sytem-installed
libreadline this is sufficient. However, in some environments (e.g. if an unmodified distribution version of readline is in use), some
extra configuration may be necessary. The INSTALL file for libreadline says this:
"Readline uses the termcap functions, but does not link with the
termcap or curses library itself, allowing applications which link
with readline the to choose an appropriate library."
If your environment has not been set up so that an appropriate library is automatically included, you may need to add something like
immediately before the configure command.
DEBUGGING WITH VALGRIND SUPPORT
By adding the
option to to the configure command, PCRE will use valgrind annotations to mark certain memory regions as unaddressable. This allows it to
detect invalid memory accesses, and is mostly useful for debugging PCRE itself.
CODE COVERAGE REPORTING
If your C compiler is gcc, you can build a version of PCRE that can generate a code coverage report for its test suite. To enable this, you
must install lcov version 1.6 or above. Then specify
to the configure command and build PCRE in the usual way.
Note that using ccache (a caching C compiler) is incompatible with code coverage reporting. If you have configured ccache to run automati-
cally on your system, you must set the environment variable
before running make to build PCRE, so that ccache is not used.
When --enable-coverage is used, the following addition targets are added to the Makefile:
This creates a fresh coverage report for the PCRE test suite. It is equivalent to running "make coverage-reset", "make coverage-baseline",
"make check", and then "make coverage-report".
This zeroes the coverage counters, but does nothing else.
This captures baseline coverage information.
This creates the coverage report.
This removes the generated coverage report without cleaning the coverage data itself.
This removes the captured coverage data without removing the coverage files created at compile time (*.gcno).
This cleans all coverage data including the generated coverage report. For more information about code coverage, see the gcov and lcov doc-
pcreapi(3), pcre16, pcre32, pcre_config(3).
University Computing Service
Cambridge CB2 3QH, England.
Last updated: 12 May 2013
Copyright (c) 1997-2013 University of Cambridge.
PCRE 8.33 12 May 2013 PCREBUILD(3)