# perluts(1) [osx man page]

PERLUTS(1) Perl Programmers Reference Guide PERLUTS(1)NAME

perluts - Perl under UTSSYNOPSIS

This document can be read as is: as README.uts, or you can read it after you build your package using "man perluts". The purpose is to help you build Perl for UTS, which, if you follow these instructions, should be easy, and result in a solidly working installation.DESCRIPTION

Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTSBUILDING PERL ON UTS

NOTE: Some sites have redefined the way uname works, and if yours does this, special steps must be taken so that Configure can recognize your system as a UTS system. To see if you are in this category, issue the command "uname -a". It should look something like: uts juno 4 4.4 9672 370 At any rate, the first field should be "uts". If this is not the case; supposing it is, say telcoUTS, create a script, uts/uname (i.e. uname, in the subdirectory "uts" of the main Perl source dir): # uname /usr/bin/uname "$@" | sed's/^telcoUTS/uts/' and when you execute Configure, do it as below, except for adding PATH=uts:$PATH as a prefix. I.e. do: PATH=uts:$PATH ./Configure ... There is no need to do an interactive configure, just type ./Configure-e[-de] [-Dusedevel] 2>&1 | tee Conf.out "-Dusedevel" may be required to configure Perl 5.7.2 non-interactively. Use-Doptimize=-gif you want to run Perl under sdb or gdb, OR if you want to be able to use the-Doptimize=-gcommand line flags to perl, which are occasionally useful in debugging perl scripts. In this and the following steps, the "2>&1 | tee XXX.out" records all output from the process, which will be useful if anything unexpected goes wrong. Then do the compilation with make 2>&1 | tee make.out Finally, test using make test 2>&1 | tee make-test.out In the output, the only failures you should see should look like: lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ... FAILED at test 57 lib/Math/BigInt/t/bigintc..........ok lib/Math/BigInt/t/bigintpm.........FAILED at test 204 lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ... Illegal division by zero at ../lib/Math/BigInt/Calc.pm line 314. FAILED at test 71 lib/Math/Complex...................exp: OVERFLOW FAILED at test 250 lib/Math/Trig......................exp: OVERFLOW ok lib/Memoize/t/array................ok ... lib/Net/protoent...................ok lib/Net/servent....................FAILED at test 0 This means that everything passes except for some problems in the packages "Math::BigInt", "Math::Complex", and "Math::Trig". The lib/Net/servent failure seems to be a bug in the test program. To confirm this, from the main Perl source dir, do: LD_LIBRARY_PATH=`pwd` ./perl-Dlib/Net/servent.t and it should output 1..3 ok 1 ok 2 ok 3-IlibInstalling the built perl on UTSRun the command "make install"AUTHOR

Hal Morris UTS Global LLC email: hom00@utsglobal.comperl v5.16.22012-10-25 PERLUTS(1)

## Check Out this Related Man Page

Math::BigInt::FastCalc(3pm) Perl Programmers Reference Guide Math::BigInt::FastCalc(3pm)NAME

Math::BigInt::FastCalc - Math::BigInt::Calc with some XS for more speedSYNOPSIS

Provides support for big integer calculations. Not intended to be used by other modules. Other modules which sport the same functions can also be used to support Math::BigInt, like Math::BigInt::GMP or Math::BigInt::Pari.DESCRIPTION

In order to allow for multiple big integer libraries, Math::BigInt was rewritten to use library modules for core math routines. Any module which follows the same API as this can be used instead by using the following: use Math::BigInt lib => 'libname'; 'libname' is either the long name ('Math::BigInt::Pari'), or only the short version like 'Pari'. To use this library: use Math::BigInt lib => 'FastCalc'; Note that from Math::BigInt v1.76 onwards, FastCalc will be loaded automatically, if possible.STORAGE

FastCalc works exactly like Calc, in stores the numbers in decimal form, chopped into parts.METHODS

The following functions are now implemented in FastCalc.xs: _is_odd _is_even _is_one _is_zero _is_two _is_ten _zero _one _two _ten _acmp _len _num _inc _dec __strip_zeros _copyLICENSE

This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself.AUTHORS

Original math code by Mark Biggar, rewritten by Tels <http://bloodgate.com/> in late 2000. Seperated from BigInt and shaped API with the help of John Peacock. Fixed, sped-up and enhanced by Tels http://bloodgate.com 2001-2003. Further streamlining (api_version 1 etc.) by Tels 2004-2007.SEE ALSO

Math::BigInt, Math::BigFloat, Math::BigInt::GMP, Math::BigInt::FastCalc and Math::BigInt::Pari.perl v5.12.12010-04-26 Math::BigInt::FastCalc(3pm)