unbound-control(8) unbound 1.4.17 unbound-control(8)
NAME
unbound-control, unbound-control-setup - Unbound remote server control utility.
SYNOPSIS
unbound-control [-h] [-c cfgfile] [-s server] command
DESCRIPTION
Unbound-control performs remote administration on the unbound(8) DNS server. It reads the configuration file, contacts the unbound server
over SSL sends the command and displays the result.
The available options are:
-h Show the version and commandline option help.
-c cfgfile
The config file to read with settings. If not given the default config file /etc/unbound/unbound.conf is used.
-s server[@port]
IPv4 or IPv6 address of the server to contact. If not given, the address is read from the config file.
COMMANDS
There are several commands that the server understands.
start Start the server. Simply execs unbound(8). The unbound executable is searched for in the PATH set in the environment. It is
started with the config file specified using -c or the default config file.
stop Stop the server. The server daemon exits.
reload Reload the server. This flushes the cache and reads the config file fresh.
verbosity number
Change verbosity value for logging. Same values as verbosity keyword in unbound.conf(5). This new setting lasts until the server is
issued a reload (taken from config file again), or the next verbosity control command.
log_reopen
Reopen the logfile, close and open it. Useful for logrotation to make the daemon release the file it is logging to. If you are
using syslog it will attempt to close and open the syslog (which may not work if chrooted).
stats Print statistics. Resets the internal counters to zero, this can be controlled using the statistics-cumulative config statement.
Statistics are printed with one [name]: [value] per line.
stats_noreset
Peek at statistics. Prints them like the stats command does, but does not reset the internal counters to zero.
status Display server status. Exit code 3 if not running (the connection to the port is refused), 1 on error, 0 if running.
local_zone name type
Add new local zone with name and type. Like local-zone config statement. If the zone already exists, the type is changed to the
given argument.
local_zone_remove name
Remove the local zone with the given name. Removes all local data inside it. If the zone does not exist, the command succeeds.
local_data RR data...
Add new local data, the given resource record. Like local-data config statement, except for when no covering zone exists. In that
case this remote control command creates a transparent zone with the same name as this record. This command is not good at return-
ing detailed syntax errors.
local_data_remove name
Remove all RR data from local name. If the name already has no items, nothing happens. Often results in NXDOMAIN for the name (in
a static zone), but if the name has become an empty nonterminal (there is still data in domain names below the removed name), NOER-
ROR nodata answers are the result for that name.
dump_cache
The contents of the cache is printed in a text format to stdout. You can redirect it to a file to store the cache in a file.
load_cache
The contents of the cache is loaded from stdin. Uses the same format as dump_cache uses. Loading the cache with old, or wrong data
can result in old or wrong data returned to clients. Loading data into the cache in this way is supported in order to aid with
debugging.
lookup name
Print to stdout the name servers that would be used to look up the name specified.
flush name
Remove the name from the cache. Removes the types A, AAAA, NS, SOA, CNAME, DNAME, MX, PTR, SRV and NAPTR. Because that is fast to
do. Other record types can be removed using flush_type or flush_zone.
flush_type name type
Remove the name, type information from the cache.
flush_zone name
Remove all information at or below the name from the cache. The rrsets and key entries are removed so that new lookups will be per-
formed. This needs to walk and inspect the entire cache, and is a slow operation.
flush_stats
Reset statistics to zero.
flush_requestlist
Drop the queries that are worked on. Stops working on the queries that the server is working on now. The cache is unaffected. No
reply is sent for those queries, probably making those users request again later. Useful to make the server restart working on
queries with new settings, such as a higher verbosity level.
dump_requestlist
Show what is worked on. Prints all queries that the server is currently working on. Prints the time that users have been waiting.
For internal requests, no time is printed. And then prints out the module status.
flush_infra all|IP
If all then entire infra cache is emptied. If a specific IP address, the entry for that address is removed from the cache. It con-
tains EDNS, ping and lameness data.
dump_infra
Show the contents of the infra cache.
set_option opt: val
Set the option to the given value without a reload. The cache is therefore not flushed. The option must end with a ':' and white-
space must be between the option and the value. Some values may not have an effect if set this way, the new values are not written
to the config file, not all options are supported. This is different from the set_option call in libunbound, where all values work
because unbound has not been inited.
The values that work are: statistics-interval, statistics-cumulative, do-not-query-localhost, harden-short-bufsize,
harden-large-queries, harden-glue, harden-dnssec-stripped, harden-below-nxdomain, harden-referral-path, prefetch, prefetch-key,
log-queries, hide-identity, hide-version, identity, version, val-log-level, val-log-squelch, ignore-cd-flag, add-holddown, del-hold-
down, keep-missing, tcp-upstream, ssl-upstream.
get_option opt
Get the value of the option. Give the option name without a trailing ':'. The value is printed. If the value is "", nothing is
printed and the connection closes. On error 'error ...' is printed (it gives a syntax error on unknown option). For some options a
list of values, one on each line, is printed. The options are shown from the config file as modified with set_option. For some
options an override may have been taken that does not show up with this command, not results from e.g. the verbosity and forward
control commands. Not all options work, see list_stubs, list_forwards, list_local_zones and list_local_data for those.
list_stubs
List the stub zones in use. These are printed one by one to the output. This includes the root hints in use.
list_forwards
List the forward zones in use. These are printed zone by zone to the output.
list_local_zones
List the local zones in use. These are printed one per line with zone type.
list_local_data
List the local data RRs in use. The resource records are printed.
forward_add [+i] zone addr ...
Add a new forward zone to running unbound. With +i option also adds a domain-insecure for the zone (so it can resolve insecurely if
you have a DNSSEC root trust anchor configured for other names). The addr can be IP4, IP6 or nameserver names, like forward-zone
config in unbound.conf.
forward_remove [+i] zone
Remove a forward zone from running unbound. The +i also removes a domain-insecure for the zone.
stub_add [+ip] zone addr ...
Add a new stub zone to running unbound. With +i option also adds a domain-insecure for the zone. With +p the stub zone is set to
prime, without it it is set to notprime. The addr can be IP4, IP6 or nameserver names, like the stub-zone config in unbound.conf.
stub_remove [+i] zone
Remove a stub zone from running unbound. The +i also removes a domain-insecure for the zone.
forward [off | addr ... ]
Setup forwarding mode. Configures if the server should ask other upstream nameservers, should go to the internet root nameservers
itself, or show the current config. You could pass the nameservers after a DHCP update.
Without arguments the current list of addresses used to forward all queries to is printed. On startup this is from the forward-zone
"." configuration. Afterwards it shows the status. It prints off when no forwarding is used.
If off is passed, forwarding is disabled and the root nameservers are used. This can be used to avoid to avoid buggy or non-DNSSEC
supporting nameservers returned from DHCP. But may not work in hotels or hotspots.
If one or more IPv4 or IPv6 addresses are given, those are then used to forward queries to. The addresses must be separated with
spaces. With '@port' the port number can be set explicitly (default port is 53 (DNS)).
By default the forwarder information from the config file for the root "." is used. The config file is not changed, so after a
reload these changes are gone. Other forward zones from the config file are not affected by this command.
EXIT CODE
The unbound-control program exits with status code 1 on error, 0 on success.
SET UP
The setup requires a self-signed certificate and private keys for both the server and client. The script unbound-control-setup generates
these in the default run directory, or with -d in another directory. If you change the access control permissions on the key files you can
decide who can use unbound-control, by default owner and group but not all users. Run the script under the same username as you have con-
figured in unbound.conf or as root, so that the daemon is permitted to read the files, for example with:
sudo -u unbound unbound-control-setup
If you have not configured a username in unbound.conf, the keys need read permission for the user credentials under which the daemon is
started. The script preserves private keys present in the directory. After running the script as root, turn on control-enable in
unbound.conf.
STATISTIC COUNTERS
The stats command shows a number of statistic counters.
threadX.num.queries
number of queries received by thread
threadX.num.cachehits
number of queries that were successfully answered using a cache lookup
threadX.num.cachemiss
number of queries that needed recursive processing
threadX.num.prefetch
number of cache prefetches performed. This number is included in cachehits, as the original query had the unprefetched answer from
cache, and resulted in recursive processing, taking a slot in the requestlist. Not part of the recursivereplies (or the histogram
thereof) or cachemiss, as a cache response was sent.
threadX.num.recursivereplies
The number of replies sent to queries that needed recursive processing. Could be smaller than threadX.num.cachemiss if due to time-
outs no replies were sent for some queries.
threadX.requestlist.avg
The average number of requests in the internal recursive processing request list on insert of a new incoming recursive processing
query.
threadX.requestlist.max
Maximum size attained by the internal recursive processing request list.
threadX.requestlist.overwritten
Number of requests in the request list that were overwritten by newer entries. This happens if there is a flood of queries that
recursive processing and the server has a hard time.
threadX.requestlist.exceeded
Queries that were dropped because the request list was full. This happens if a flood of queries need recursive processing, and the
server can not keep up.
threadX.requestlist.current.all
Current size of the request list, includes internally generated queries (such as priming queries and glue lookups).
threadX.requestlist.current.user
Current size of the request list, only the requests from client queries.
threadX.recursion.time.avg
Average time it took to answer queries that needed recursive processing. Note that queries that were answered from the cache are not
in this average.
threadX.recursion.time.median
The median of the time it took to answer queries that needed recursive processing. The median means that 50% of the user queries
were answered in less than this time. Because of big outliers (usually queries to non responsive servers), the average can be big-
ger than the median. This median has been calculated by interpolation from a histogram.
total.num.queries
summed over threads.
total.num.cachehits
summed over threads.
total.num.cachemiss
summed over threads.
total.num.prefetch
summed over threads.
total.num.recursivereplies
summed over threads.
total.requestlist.avg
averaged over threads.
total.requestlist.max
the maximum of the thread requestlist.max values.
total.requestlist.overwritten
summed over threads.
total.requestlist.exceeded
summed over threads.
total.requestlist.current.all
summed over threads.
total.recursion.time.median
averaged over threads.
time.now
current time in seconds since 1970.
time.up
uptime since server boot in seconds.
time.elapsed
time since last statistics printout, in seconds.
EXTENDED STATISTICS
mem.total.sbrk
If sbrk(2) is available, an estimate of the heap size of the program in number of bytes. Close to the total memory used by the pro-
gram, as reported by top and ps. Could be wrong if the OS allocates memory non-contiguously.
mem.cache.rrset
Memory in bytes in use by the RRset cache.
mem.cache.message
Memory in bytes in use by the message cache.
mem.mod.iterator
Memory in bytes in use by the iterator module.
mem.mod.validator
Memory in bytes in use by the validator module. Includes the key cache and negative cache.
histogram.<sec>.<usec>.to.<sec>.<usec>
Shows a histogram, summed over all threads. Every element counts the recursive queries whose reply time fit between the lower and
upper bound. Times larger or equal to the lowerbound, and smaller than the upper bound. There are 40 buckets, with bucket sizes
doubling.
num.query.type.A
The total number of queries over all threads with query type A. Printed for the other query types as well, but only for the types
for which queries were received, thus =0 entries are omitted for brevity.
num.query.type.other
Number of queries with query types 256-65535.
num.query.class.IN
The total number of queries over all threads with query class IN (internet). Also printed for other classes (such as CH (CHAOS)
sometimes used for debugging), or NONE, ANY, used by dynamic update. num.query.class.other is printed for classes 256-65535.
num.query.opcode.QUERY
The total number of queries over all threads with query opcode QUERY. Also printed for other opcodes, UPDATE, ...
num.query.tcp
Number of queries that were made using TCP towards the unbound server.
num.query.ipv6
Number of queries that were made using IPv6 towards the unbound server.
num.query.flags.RD
The number of queries that had the RD flag set in the header. Also printed for flags QR, AA, TC, RA, Z, AD, CD. Note that queries
with flags QR, AA or TC may have been rejected because of that.
num.query.edns.present
number of queries that had an EDNS OPT record present.
num.query.edns.DO
number of queries that had an EDNS OPT record with the DO (DNSSEC OK) bit set. These queries are also included in the
num.query.edns.present number.
num.answer.rcode.NXDOMAIN
The number of answers to queries, from cache or from recursion, that had the return code NXDOMAIN. Also printed for the other return
codes.
num.answer.rcode.nodata
The number of answers to queries that had the pseudo return code nodata. This means the actual return code was NOERROR, but addi-
tionally, no data was carried in the answer (making what is called a NOERROR/NODATA answer). These queries are also included in the
num.answer.rcode.NOERROR number. Common for AAAA lookups when an A record exists, and no AAAA.
num.answer.secure
Number of answers that were secure. The answer validated correctly. The AD bit might have been set in some of these answers, where
the client signalled (with DO or AD bit in the query) that they were ready to accept the AD bit in the answer.
num.answer.bogus
Number of answers that were bogus. These answers resulted in SERVFAIL to the client because the answer failed validation.
num.rrset.bogus
The number of rrsets marked bogus by the validator. Increased for every RRset inspection that fails.
unwanted.queries
Number of queries that were refused or dropped because they failed the access control settings.
unwanted.replies
Replies that were unwanted or unsolicited. Could have been random traffic, delayed duplicates, very late answers, or could be
spoofing attempts. Some low level of late answers and delayed duplicates are to be expected with the UDP protocol. Very high val-
ues could indicate a threat (spoofing).
FILES
/etc/unbound/unbound.conf
unbound configuration file.
/etc/unbound
directory with private keys (unbound_server.key and unbound_control.key) and self-signed certificates (unbound_server.pem and
unbound_control.pem).
SEE ALSO
unbound.conf(5), unbound(8).
NLnet Labs May 24, 2012 unbound-control(8)