vrestore(8) System Manager's Manual vrestore(8)
NAME
vrestore, rvrestore - Restores files from savesets that are produced by vdump and rvdump
SYNOPSIS
/sbin/vrestore -h
/sbin/vrestore -V
/sbin/vrestore -t [-f device]
/sbin/vrestore -l [-f device]
/sbin/vrestore -i [-mqv] [-f device] [-D path] [-o opt]
/sbin/vrestore -x [-mqv] [-f device] [-D path] [-o opt] [file...]
/sbin/rvrestore -h
/sbin/rvrestore -V
/sbin/rvrestore -t [-f nodename:device]
/sbin/rvrestore -l [-f nodename:device]
/sbin/rvrestore -i [-mqv] [-f nodename:device] [-D path] [-o opt]
/sbin/rvrestore -x [-mqv] [-f nodename:device] [-D path] [-o opt] [file...]
OPTIONS
Specifies the destination path of where to restore the files. Without the -D option, the files are restored to the current directory.
When an argument follows the -f option, it specifies the name of the storage device that contains the saveset to be restored. The argument
replaces the default device /dev/tape/tape0_d1.
For rvrestore, the mandatory specification is nodename:device to specify the remote machine name that holds the saveset to be
restored. There is no default device. Displays usage help for the command. Permits interactive restoration of files read from a
saveset. After reading directory information from the saveset, the vrestore command provides a shell-like interface that allows you
to select the files you want to restore. Some of the following interactive commands require an arg parameter that is a subdirectory
or one or more file names. The other interactive commands use the current directory as default when the arg parameter is not spec-
ified. Multiple file names can be separated by spaces. Quotes (") can be used around a file name that contains space(s). File
names containing quotes (") can be specified by preceding the quote with a backslash (). The interactive commands are explained in
the following list: Adds the files in the saveset specified by arg to the list of files to be restored. Files on the list of files
to be restored are prepended with the * (asterisk) character when they are listed with the ls interactive command. Changes the cur-
rent saveset directory to the directory specified with the arg parameter. Deletes all files and their subdirectories specified by
the arg parameter from the list of files to be restored.
An expedient way to select wanted files from any directory in a saveset is to add the directory to the list of files to be restored
and then delete the ones that are not wanted. Restores files, previously added by using the add command, to the current destination
directory. Displays help information for the interactive commands. Lists files in the current saveset directory or the directory
specified with the arg parameter. Directory entries are appended with a slash (/) character. Entries that have been marked to be
restored are prepended with an asterisk (*) character. Writes the path name of the current saveset directory to the standard output
device. Exits immediately, even when the files on the list of files to be restored have not been read. Escapes from the shell,
runs the system command, then returns to the shell. Selects the -v modifier (see the -v option). The name of each file restored
from the saveset is written to the standard output device. Displays help information for the interactive commands. Lists the
entire saveset structure. Does not preserve the owner, group, or modes of each file from the device. Specifies the action to take
when a file already exists. The options are: Overwrites existing files without any query. The default is yes. Does not overwrite
existing files. Asks whether to overwrite an existing file. Prints only error messages; does not print information messages.
Lists the names and size (in bytes) of all files contained in a saveset. Exception: the sizes of any AdvFS quota files are not
shown. Writes the name of each file read from the storage device to the standard output device. Without this option the vrestore
command does not notify you about progress on reading from the storage device. Displays the current version for the command.
Extracts a specific file or files from the saveset. Use this command as an alternate to using the add command in interactive mode.
The -x option can precede any other options, but the file... list must be the last item on the command line.
For example, to restore the files file1 and file2 from the saveset on the default device, /dev/tape/tape0_d1, to the /mnt directory,
enter: # vrestore -x -D /mnt file1 file2 Specifies the file or files to restore when using the -x option. All other options must
precede any file names on the command line.
DESCRIPTION
The vrestore and rvrestore commands restore data from a saveset previously archived by the vdump command or the rvdump command. The data,
which can be restored from a file, a pipe (not applicable for the rvrestore command), or a storage device (typically tape), is written to
the specified directory. The default storage device from which files are read is /dev/tape/tape0_d1. You can use the -f option to specify
a different device or file. Tape storage devices can contain more than one saveset. The vrestore and rvrestore commands restore any associ-
ated extended attributes, including ACLs, in the archive data. See the proplist(4) and acl(4) reference pages.
The vrestore and rvrestore commands are the restore facility for the AdvFS file system. However, the commands can be used to restore UFS
and NFS files that have been archived by using the vdump or rvdump commands.
The default directory into which the files are restored is the current directory. You can specify an alternate directory by using the -D
option.
Use the -t option to list the file names and sizes of the files in a saveset without restoring any files.
When you are using the interactive shell and the AdvFS user and group quota files are available in the saveset for restoration, the file
names used to refer to them will be quota.user and quota.group, regardless of what the quota files are named in either the backed up file-
set or in the destination fileset. Restoration of the quota files does not change the names of the quota files in the destination fileset.
If the destination fileset is AdvFS, and the saveset contains AdvFS fileset quotas, the fileset quotas are restored, even when they differ
from the fileset quotas of the destination fileset. By using the -o no or -o ask options, you can prevent this behavior.
The vdump and rvdump commands can write many savesets to a tape. If you want to use the vrestore or the rvrestore commands to restore a
particular saveset, you must first position the tape to the saveset by using the mt command with the fsf option to move through your tape.
The source directory path from a vdump command line is stored as a string in the header record of the saveset produced. The vrestore com-
mand displays this string when it restores the archived saveset. The string truncates at 128 characters. Several vrestore command options,
including -t, -l, -i, and -x, display the source directory path. The command is the exact string from the vdump command: it contains no
relative pathname expansions or resolved symbolic links.
For example, if a vdump command line contained instructions to dump files from a directory named /usr/specs, which was a symbolic link to a
directory named /tmp_mnt/pease1/usr/specs, the source directory string displayed by the vrestore command would be /usr/specs:
The vdump command: % vdump -0 -f mydump /usr/specs
The vrestore command and string displayed: % vrestore -t -f mydump vrestore: Date of the vdump save-set: "date" >>> vrestore: Save-set
source directory: /usr/specs
Files that were saved on a system running a pre-Version 5 operating system will be restored by a Version 5 operating system in the same
manner as they would have been restored by a pre-Version 5 system. This means that any UFS sparse files archived with the vdump command
prior to Tru64 UNIX Version 5.0 will be allocated disk space and filled with zeros and any AdvFS striped sparse files archived with the
vdump command prior to Version 4.0D will be allocated disk space and filled with zeros. If you save and restore your sparse files under
Version 5, they will remain sparse.
Note that an incremental dump only captures the files that have changed, ignoring all others. This means that if you perform a level 0
dump and a later incremental dump, deleted files are not marked as gone (deleted). If you then do a complete restore with a level 0
saveset and incremental backups, the deleted files will be restored. You must then delete these files individually.
You do not have to be the root user to use the vrestore command, but you must have write access to the directory to which you want to
restore the files.
RESTRICTIONS
To run the rvrestore command, you must be able to execute the rsh command from the remote node from which you want to restore. See rsh(1)
for server and client access rules.
Filesets that have been archived by using the vdump or rvdump command must be restored by using the vrestore or rvrestore command. The
vdump and rvdump commands are not interchangeable with the dump and rdump commands. Similarly, the vrestore and rvrestore commands are not
interchangeable with the restore and rrestore commands.
A saveset stored on a block special device file containing disk block 0 that has not had the disk label cleared will contain an error and
no files will be restored. See vdump(8) for more information.
Only the root user can restore AdvFS quota files and fileset quotas. A warning message is displayed when a non-root user attempts to use
the vrestore command to restore AdvFS quota files or fileset quotas.
The vrestore command in operating system versions earlier than Version 4.0 cannot be used to restore savesets produced by the vdump command
in Version 4.0 or higher systems.
The vrestore command in Tru64 UNIX Version 5.0 cannot interactively restore quota files that have been saved by the vdump command in Ver-
sion 4.0D and earlier. However, the command mode of the vrestore command in Tru64 UNIX Version 5.0 can restore such quota files.
AdvFS quota files can be restored to either an AdvFS fileset or a UFS file system, but UFS quota files cannot be restored to an AdvFS file-
set. If AdvFS quota files are to be restored to a UFS file system, quotas must be enabled on the UFS file system. Otherwise, the operation
fails. AdvFS fileset quotas cannot be restored to a UFS file system because there is no UFS analog to AdvFS fileset quotas.
Attempting to use a vrestore or rvrestore to restore to a base directory that has a default directory access control list (ACL) or a
default access ACL may cause unintended ACLs to be created on the restored files and directories. If ACLs are enabled on the system, check
all ACLs after using the vrestore or rvrestore command. View the documents in SEE ALSO for more information about access control lists
(ACLs).
EXAMPLES
To restore a local archive produced by the vdump command and mounted on the default storage device to the mnt directory, enter a command
similar to the following: % vrestore -D /mnt To restore a remote archive produced by the vdump or rvdump command and mounted on the default
storage device on machine node pease to the local mnt directory, enter a command similar to the following: # rvrestore -xf
pease:/dev/tape/tape0 -D /mnt When the restore saveset device is the character dash (-), the vrestore command reads from standard input.
Thus, the vdump and vrestore commands can be used in a pipeline expression to copy filesets. The following are typical commands; they are
equivalent: # vdump -0 -f - /usr | (cd /mnt; vrestore -x -f -) # vdump -0f - /usr | vrestore -xf - -D /mnt
The rvdump and rvrestore commands are unable to use the dash (-) character. The output device must be specified.
FILES
The vrestore command path. The rvrestore command path. The default storage device.
SEE ALSO
Commands: mt(1), rsh(1), rvdump(8), vdump(8)
Files: acl(4), proplist(4)
vrestore(8)