UPLCOM(4) BSD Kernel Interfaces Manual UPLCOM(4)NAME
uplcom -- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device uplcom
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
uplcom_load="YES"
DESCRIPTION
The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge
chips.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The uplcom driver supports the following adapters:
o ATEN UC-232A
o BAFO BF-800
o BAFO BF-810
o Belkin F5U257
o ELECOM UC-SGT
o HAL Corporation Crossam2+USB IR commander
o Hama USB RS-232 Serial Adapter
o Hamlet exagerate XURS232
o IOGEAR UC-232A
o I/O DATA USB-RSAQ
o I/O DATA USB-RSAQ2
o I/O DATA USB-RSAQ3
o Mobile Action MA-620 Infrared Adapter
o PLANEX USB-RS232 URS-03
o RATOC REX-USB60
o Radio Shack USB Serial Cable
o Sandberg USB to Serial Link (model number 133-08)
o SOURCENEXT KeikaiDenwa 8 (with and without charger)
o Sony Ericsson USB Cable (Susteen USB Data Cable)
o Willcom W-SIM DD PHS terminal.(WS002IN)
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The uplcom driver appeared in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
BSD November 22, 2006 BSD
Check Out this Related Man Page
UPLCOM(4) BSD Kernel Interfaces Manual UPLCOM(4)NAME
uplcom -- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device uplcom
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
uplcom_load="YES"
DESCRIPTION
The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge
chips.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The uplcom driver supports the following adapters:
o ATEN UC-232A
o BAFO BF-800
o BAFO BF-810
o Belkin F5U257
o ELECOM UC-SGT
o HAL Corporation Crossam2+USB IR commander
o Hama USB RS-232 Serial Adapter
o Hamlet exagerate XURS232
o IOGEAR UC-232A
o I/O DATA USB-RSAQ
o I/O DATA USB-RSAQ2
o I/O DATA USB-RSAQ3
o Mobile Action MA-620 Infrared Adapter
o PLANEX USB-RS232 URS-03
o RATOC REX-USB60
o Radio Shack USB Serial Cable
o Sandberg USB to Serial Link (model number 133-08)
o SOURCENEXT KeikaiDenwa 8 (with and without charger)
o Sony Ericsson USB Cable (Susteen USB Data Cable)
o Willcom W-SIM DD PHS terminal.(WS002IN)
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The uplcom driver appeared in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
BSD November 22, 2006 BSD
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Please note: This solution does require some soldering ability.
If, like me today, you really really need to get into OpenBoot on a non booting Solaris machine (in my case an Ultra 5) but your USB dongle won't send <BREAK> then here is a -really- simple hardware hack that works a treat:
... (0 Replies)
Hi again,
I spoke with Keyspan and they assured me the USB to Serial device was working if I could use the Screen tool.
I asked why I was unable to redirect stdin/stdout to and from the /dev/tty. device and was told there was no reason I shouldn't be able to do so.
I have tried:
... (1 Reply)
We are unable to ping from Sun Ultra 60 to Ultra 10 machine and vice versa. We are getting an error message Cable Link Down ?. It was working fine.
Troubleshooting steps taken.
1) Changed the IPaddresses on both machines 192.168.10.10 and 192.168.10.20. These machines connected through 8 port... (2 Replies)
Hi Community,
I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly.
I've this problem, I'm connecting to Server with Putty client with this settings:
boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed... (4 Replies)
Hello,
I am trying to send serial commands via a USB->Serial device using Mac OSX 10.5. I have the PL2303 driver installed. I have installed minicom and I can send commands all day long using echo "Dallas" >/dev/tty.usbserial if minicom is running. If minicom is not running the the echo command... (1 Reply)
Does anyone have the pinout for the front RS-232 RJ-45 Port on IBM Power Server 5, 9131-52A? Of course the cabel is straight through, but on the DB9 side is what I need. (2 Replies)
Hi Gurus of Unix
Recently I install a OpenSolaris in My HP 530
In this moment want to install a USB-A to Serial Cable. Any guru can send a Link where I can use how reference.
I want to configure a Router and my PC don't have any serial Port.
My LapTOP only has USB ports. In this case I buy a... (2 Replies)
Hi
Had an old ML590 with RS232 serial card that stopped working (spindle that advance ribbon broke) so I purchased a working used on ebay.
Printer powers up and seems fine. Put serial board from old printer in working ebay unit but no printing happens.
Does anyone know if there are any... (0 Replies)
Hi
Had an old ML590 with RS232 serial card that stopped working (spindle that advance ribbon broke) so I purchased a working used on ebay.
Printer powers up and seems fine. Put serial board from old printer in working ebay unit but no printing happens.
Does anyone know if there are any... (3 Replies)