dvdfs(4) Kernel Interfaces Manual dvdfs(4)NAME
dvdfs - The Digital Versatile Disk File System [This feature is not supported in Tru64 UNIX Version 5.0]
STANDARDS
Interfaces documented on this reference page conform to industry standards as follows:
ISO/ITEC 13346:1995
Optical Storage Technology Association (OSTA) Universal Disk Format (UDF) Specification, "OSTA UDF Compliant Domain", Version 2.00.
ISO 9660:1988
Information Processing-Volume and file structure of CD-ROM for information interchange.
Refer to the standards(5) reference page for more information about industry standards and associated tags.
DESCRIPTION
The Digital Versatile Disk File System enables the reading of disks formatted in the Universal Disk Format (UDF).
User data sectors in a DVD-ROM can contain any type of data in any format. However, for Tru64 UNIX support through the dvdfs file system,
the OSTA UDF file format standard is mandatory. The file system limit for DVDFS is int cfs_cdfs_mount_limit = 512.
Additionally, DVD-ROM standards require that the logical sector size and the logical block (the user data block) size be 2048 bytes.
DVD support in the UDF specification includes these levels: DVD-ROM (Read-only):
Supports reading of UDF-formated files from DVD-ROM disks. DVD-R (Write-once):
Supports the reading of UDF-formated files from a DVD-ROM disk and supports writing, one time, UDF-formated files onto a DVD-ROM
disk. DVD-RAM (Rewritable):
Supports reading and writing of UDF-formated files from and to a DVD-ROM disk.
At this time, the Tru64 UNIX dvdfs file system supports only the DVD-ROM (Read-only) format.
See mount(8) for information about mounting and unmounting a dvdfs file system, fstab(4) for information about including dvdfs file system
in a system's /etc/fstab file, and disklabel(8) for information about labeling DVD-ROM disks.
RELATED INFORMATION
Commands: disklabel(8), mount(8)
Files: cdfs(4)fstab(4) delim off
dvdfs(4)
Check Out this Related Man Page
MOUNT_UDF(8) BSD System Manager's Manual MOUNT_UDF(8)NAME
mount_udf -- mount a UDF filesystem
SYNOPSIS
mount_udf [-o options] [-s sessionStart] [-n lastRecordedLBA] [-b blockSize] [-p packetSizeInBlocks] [-v verificationPolicy] [-w] devicePath
mountPath
DESCRIPTION
The mount_udf command attaches the UDF filesystem residing on the device devicePath to the global filesystem namespace at the location indi-
cated by mountPath. This command is normally executed by mount(8) at boot time.
The options are as follows:
-o options
Options are specified with a -o flag followed by a comma separated string of options. See the mount(8) man page for possible options
and their meanings.
-v verificationPolicy
This is an advanced option not useful for regular use. It controlls the verification policy when writing to RW type optical media.
Its value can be "meta", "all", or "none". Policy "meta" means only the metadata are verified after they are written. This is the
default policy. Policy "all" means to verify data written, which could be several times slower than policy "meta". Policy "none"
does not verify any data. It is only slightly faster than "meta" in normal cases, but may result a corrupted UDF disc if the write
of metadata fails.
-s sessionStart
This is an advanced option not useful for regular use. When manually mounting a UDF volume with Virtual Partition, it specifies the
start Logical Block Address of the last session where UDF data structures (VRS and AVDP) resides. This value overrides the value
obtained from the device.
-n lastRecordedLBA
This is an advanced option not useful for regular use. When manually mounting a UDF volume with Virtual Partition, it specifies the
last recorded Logical Block Address where the UDF VAT ICB will be searched. This value overrides the value obtained from the device.
-b blockSize
This is an advanced option not useful for regular use. It specifies the block size in bytes used when mounting the UDF volume. This
value overrides the value obtained from the device.
-p packetSizeInBlocks
This is an advanced option not useful for regular use. It specifies the packet size in blocks when manually mounting the UDF volume.
This value overrides the value obtained from the device.
-w This is an advanced option not useful for regular use. It forces to enable the experimental packet writing function on optical media
that has not been fully supported, such as CD-R, CD-RW, DVD-R, DVD+R, HD DVD-R, and BD-R. Writing to these media does not work on
some drives and may cause data corruption or data loss on some other drives. Therefore, this flag should be used only by file system
developers when debugging the experimental write functions.
The -s, -n, -b, and -p flags are not useful in normal use. They are mainly used for debugging and data recovery. Since the -s, -n, and -p
flags are all specified in units of block size, when any of these flags are specified, it is strongly recommended that the -b flag is also
specified.
SEE ALSO mount(2), unmount(2), fstab(5), mount(8)BUGS
Reading of all UDF revisions (1.02 - 2.60) on both block device (e.g., hard drives and USB drives) and most optical media is supported.
Writing to block devices, DVD-RW and DVD+RW is supported with the following exceptions: (1) Cannot write Finder Info, Resource Fork, or other
extended attributes in UDF volumes of revision 1.02 and 1.50; (2) Cannot write to mirrored metadata partition.
HISTORY
The mount_udf utility first appeared in Mac OS X.
4th Berkeley Distribution December 6, 2006 4th Berkeley Distribution