cut(1) General Commands Manual cut(1)
NAME
cut - Displays specified parts from each line of a file
SYNOPSIS
cut -b list [-n] [file...]
cut -c list [file...]
cut -f list [-d delim] [-s] [file...]
STANDARDS
Interfaces documented on this reference page conform to industry standards as follows:
cut: XCU5.0
Refer to the standards(5) reference page for more information about industry standards and associated tags.
OPTIONS
Cuts based on a list of bytes. Each selected byte is output, unless you also specify the -n option. For example, if you specify -b 1-72,
the cut command writes out the first 72 bytes in each line of the file. Cuts based on a list of characters. It is not an error if you
specify a character not in the input. Uses the specified character as the field delimiter (separator) when you specify the -f option. You
must quote characters with special meaning to the shell, such as the space character. Any character can be used as delim. The default
field delimiter is a tab character. Specifies a list of fields assumed to be separated in the file by a field delimiter character, speci-
fied by the -d option or the tab character by default. For example, if you specify -f 1,7, the cut command writes out only the first and
seventh fields of each line. If a line contains no field delimiters, the cut command passes them through intact (useful for table subhead-
ings), unless you specify the -s option. Does not split characters. When specified with the -b option, each element in list of the form
low-high (hyphen-separated numbers) is modified as follows: If the byte selected by low is not the first byte of a character, low is decre-
mented to select the first byte of the character originally selected by low. If the byte selected by high is not the last byte of a char-
acter, high is decremented to select the last byte of the character prior to the character originally selected by high, or zero (0) if
there is no prior character. If the resulting range element has high equal to zero (0) or low greater than high, the list element is
dropped from list for that input line without causing an error.
Each element in list of the form low- is treated as previously described with high set to the number of bytes in the current line,
not including the terminating newline character. Each element in list of the form -high is treated as previously described with low
set to 1. Each element in list of the form number (a single number) is treated as previously described with low set to number and
high set to number. Suppresses lines that do not contain delimiter characters (use only with the -f option). Unless you include
this option, lines with no delimiters are passed through.
OPERANDS
The path name of the file to be examined.
If you do not specify a file or you specify a hyphen (-), the cut command reads standard input.
DESCRIPTION
The cut command locates the specified fields in each line of the specified file and writes the characters in those fields to standard out-
put.
You must specify the -b option (to select bytes), the -c option (to select characters) or the -f option (to select fields). The list argu-
ment (see the -b, -c, and -f options) must be a space-separated or comma-separated list of positive numbers and ranges. Ranges can be in
three forms: Two positive numbers separated by a hyphen (-), as in the form low-high, which represents all fields from the first number to
the second number. A positive number preceded by a hyphen (-), as in the form -high, which represents all fields from field number 1 to
that number. A positive number followed by a hyphen (-), as in the form low-, which represents that number to the last field, inclusive.
The elements in list can be repeated, can overlap, and can be specified in any order.
Some sample list specifications are as follows: First, fourth, and seventh bytes or fields. First through third and eighth bytes or
fields. First through fifth and tenth bytes or fields. Third through last bytes or fields.
The fields specified by list can be a fixed number of byte positions, or the length can vary from line to line and be marked with a field
delimiter character, such as a tab character.
[Tru64 UNIX] You can also use the grep command to make horizontal cuts through a file and the paste command to put the files back
together. To change the order of columns in a file, use the cut and paste commands.
EXIT STATUS
The following exit values are returned: Successful completion. An error occurred.
EXAMPLES
To display several fields of each line of a file, enter: cut -f 1,5 -d : /etc/passwd
This displays the login name and full user name fields of the system password file. These are the first and fifth fields (-f 1,5) sepa-
rated by colons (-d :).
So, if the /etc/passwd file looks like this:
su:UHuj9Pgdvz0J":0:0:User with special privileges:/: daemon:*:1:1::/etc: bin:*:2:2::/usr/bin: sys:*:3:3::/usr/src: adm:*:4:4:System Admin-
istrator:/usr/adm: pierre:*:200:200:Pierre Harper:/u/pierre: joan:*:202:200:Joan Brown:/u/joan:
Then, cut -f 1,5 -d : /etc/passwd produces this output:
su:User with special privileges daemon: bin: sys: adm:System Administrator pierre:Pierre Harper joan:Joan Brown
ENVIRONMENT VARIABLES
The following environment variables affect the execution of cut: Provides a default value for the internationalization variables that are
unset or null. If LANG is unset or null, the corresponding value from the default locale is used. If any of the internationalization vari-
ables contain an invalid setting, the utility behaves as if none of the variables had been defined. If set to a non-empty string value,
overrides the values of all the other internationalization variables. Determines the locale for the interpretation of sequences of bytes
of text data as characters (for example, single-byte as opposed to multibyte characters in arguments and input files). Determines the
locale for the format and contents of diagnostic messages written to standard error. Determines the location of message catalogues for the
processing of LC_MESSAGES.
SEE ALSO
Commands: grep(1), fold(1), join(1), paste(1)
Standards: standards(5)
cut(1)