ddi_removing_power(9F) Kernel Functions for Drivers ddi_removing_power(9F)NAME
ddi_removing_power - check whether DDI_SUSPEND might result in power being removed from a device
SYNOPSIS
#include <sys/ddi.h>
#include <sys/sunddi.h>
int ddi_removing_power(dev_info_t *dip);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI)
DESCRIPTION
The ddi_removing_power() function indicates whether a currently pending call into a driver's detach(9E) entry point with a command of
DDI_SUSPEND is likely to result in power being removed from the device.
ddi_removing_power() can return true and power still not be removed from the device due to a failure to suspend and power off the system.
PARAMETERS
The ddi_removing_power() function supports the following parameter:
dip pointer to the device's dev_info structure
RETURN VALUES
The ddi_removing_power() function returns:
1 Power might be removed by the framework as a result of the pending DDI_SUSPEND call.
0 Power will not be removed by the framework as a result of the pending DDI_SUSPEND call.
EXAMPLES
Example 1 Protecting a Tape from Abrupt Power Removal
A tape driver that has hardware that would damage the tape if power is removed might include this code in its detach(9E) code:
int
xxdetach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
...
case DDI_SUSPEND:
/*
* We do not allow DDI_SUSPEND if power will be removed and
* we have a device that damages tape when power is removed
* We do support DDI_SUSPEND for Device Reconfiguration,
* however.
*/
if (ddi_removing_power(dip) && xxdamages_tape(dip))
return (DDI_FAILURE);
...
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Committed |
+-----------------------------+-----------------------------+
SEE ALSO attributes(5), cpr(7), attach(9E), detach(9E)
Writing Device Drivers
SunOS 5.11 14 March 2001 ddi_removing_power(9F)
Check Out this Related Man Page
detach(9E) Driver Entry Points detach(9E)NAME
detach - detach or suspend a device
SYNOPSIS
#include <sys/ddi.h>
#include <sys/sunddi.h>
int prefix detach(dev_info_t *dip, ddi_detach_cmd_t cmd);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI)
PARAMETERS
dip A pointer to the device's dev_info structure.
cmd Type of detach; the driver should return DDI_FAILURE if any value other than DDI_DETACH or DDI_SUSPEND is passed to it.
DESCRIPTION
The detach() function complements the attach(9E) routine.
DDI_DETACH
If cmd is set to DDI_DETACH, detach() is used to remove the state associated with a given instance of a device node prior to the removal of
that instance from the system.
The detach() function will be called once for each instance of the device for which there has been a successful attach(), once there are no
longer any opens on the device. An attached instance of a driver can be successfully detached only once. The detach() function should clean
up any per instance data initialized in attach(9E) and call kmem_free(9F) to free any heap allocations. For information on how to unregis-
ter interrupt handlers, see ddi_add_intr(9F). This should also include putting the underlying device into a quiescent state so that it
will not generate interrupts.
Drivers that set up timeout(9F) routines should ensure that they are cancelled before returning DDI_SUCCESS from detach().
If detach() determines a particular instance of the device cannot be removed when requested because of some exceptional condition, detach()
must return DDI_FAILURE, which prevents the particular device instance from being detached. This also prevents the driver from being
unloaded. A driver instance failing the detach must ensure that no per instance data or state is modified or freed that would compromise
the system or subsequent driver operation.
The system guarantees that the function will only be called for a particular dev_info node after (and not concurrently with) a successful
attach(9E) of that device. The system also guarantees that detach() will only be called when there are no outstanding open(9E) calls on
the device.
DDI_SUSPEND
The DDI_SUSPEND cmd is issued when the entire system is being suspended and power removed from it or when the system must be made quies-
cent. It will be issued only to devices which have a reg property or which export a pm-hardware-state property with the value needs-sus-
pend-resume.
If cmd is set to DDI_SUSPEND, detach() is used to suspend all activity of a device before power is (possibly) removed from the device. The
steps associated with suspension must include putting the underlying device into a quiescent state so that it will not generate interrupts
or modify or access memory. Once quiescence has been obtained, detach() can be called with outstanding open(9E) requests. It must save the
hardware state of the device to memory and block incoming or existing requests until attach() is called with DDI_RESUME.
If the device is used to store file systems, then after DDI_SUSPEND is issued, the device should still honor dump(9E) requests as this
entry point may be used by suspend-resume operation (see cpr(7)) to save state file. It must do this, however, without disturbing the saved
hardware state of the device.
If the device driver uses automatic device Power Management interfaces (driver exports pm-components(9P) property), it might need to call
pm_raise_power(9F) if the current power level is lower than required to complete the dump(9E) request.
Before returning successfully from a call to detach() with a command of DDI_SUSPEND, the driver must cancel any outstanding timeouts and
make any driver threads quiescent.
If DDI_FAILURE is returned for the DDI_SUSPEND cmd, either the operation to suspend the system or to make it quiescent will be aborted.
RETURN VALUES
DDI_SUCCESS For DDI_DETACH, the state associated with the given device was successfully removed. For DDI_SUSPEND, the driver was suc-
cessfully suspended.
DDI_FAILURE The operation failed or the request was not understood. The associated state is unchanged.
CONTEXT
This function is called from user context only.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+--------------------------+--------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------------+--------------------------------+
|Interface Stability | Evolving |
+--------------------------+--------------------------------+
SEE ALSO cpr(7), pm(7D), pm(9P), pm-components(9P), attach(9E), dump(9E), open(9E), power(9E), ddi_add_intr(9F), ddi_dev_is_needed(9F),
ddi_map_regs(9F), kmem_free(9F), pm_raise_power(9F), timeout(9F)
Writing Device Drivers
SunOS 5.10 7 Dec 2003 detach(9E)