opensolaris man page for ohci

ohci(7D)							      Devices								  ohci(7D)

NAME
       ohci - OpenHCI host controller driver

SYNOPSIS
       usb@unit-address

DESCRIPTION
       The  ohci driver is a USBA (Solaris USB Architecture) compliant nexus driver that supports the Open Host Controller Interface Specification
       1.1, an industry standard developed by Compaq, Microsoft, and National Semiconductor.

       The ohci driver supports bulk, interrupt, control and isochronous transfers.

FILES
       /kernel/drv/ohci 	   32-bit x86 ELF kernel module

       /kernel/drv/amd64/ohci	   64-bit x86 ELF kernel module

       /kernel/drv/sparcv9/ohci    64-bit SPARC ELF kernel module

       /kernel/drv/ohci.conf	   driver configuration file

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-------------------------------+
       |      ATTRIBUTE TYPE	     |	     ATTRIBUTE VALUE	     |
       +-----------------------------+-------------------------------+
       |Architecture		     |SPARC, x86, PCI-based systems  |
       +-----------------------------+-------------------------------+
       |Availability		     |SUNWusb			     |
       +-----------------------------+-------------------------------+

SEE ALSO
       attributes(5), ehci(7D), hubd(7D), uhci(7D), usba(7D)

       Writing Device Drivers

       Universal Serial Bus Specification 2.0

       Open Host Controller Interface Specification for USB 1.0a

       System Administration Guide: Basic Administration

       http://www.sun.com/io

DIAGNOSTICS
       All host controller errors are passed to the client drivers. Root hub errors are documented in hubd(7D).

       In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner:

	 WARNING: <device path> <ohci><instance number>>: Error message...

       Unrecoverable USB Hardware Error.

	   There was an unrecoverable USB hardware error reported by the OHCI Controller. Please reboot the system. If this problem persists, con-
	   tact your system vendor.

       No SOF interrupts have been received. This OHCI USB controller is unusable.

	   The	USB  hardware is not generating Start Of Frame interrupts. Please reboot the system. If this problem persists, contact your system
	   vendor.

       The following messages may be entered into the  system  log. They are formatted in the following manner:

	 <device path> <ohci<instance number>): Message...

       Failed to program frame interval register.

	   For an unspecified reason, the frame interval register has been nulled out by the Uli M1575 chip. Please reboot  the  system.  If  this
	   problem persists, contact your system vendor.

SunOS 5.11							    23 Nov 2006 							  ohci(7D)