👤
Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:
Select Section of Man Page:
Select Man Page Repository:

OpenSolaris 2009.06 - man page for ex (opensolaris section 1)

VIM(1)											   VIM(1)

NAME
       vim - Vi IMproved, a programmers text editor

SYNOPSIS
       vim [options] [file ..]
       vim [options] -
       vim [options] -t tag
       vim [options] -q [errorfile]

       rvim rview

DESCRIPTION
       Vim  is	a text editor that is upwards compatible to Vi.  It can be used to edit all kinds
       of plain text.  It is especially useful for editing programs.

       There are a lot of enhancements above Vi: multi level undo,  multi  windows  and  buffers,
       syntax  highlighting,  command  line  editing,  filename  completion, on-line help, visual
       selection, etc..  See ":help vi_diff.txt" for a summary of the differences between Vim and
       Vi.

       While  running  Vim  a  lot of help can be obtained from the on-line help system, with the
       ":help" command.  See the ON-LINE HELP section below.

       Most often Vim is started to edit a single file with the command

	    vim file

       More generally Vim is started with:

	    vim [options] [filelist]

       If the filelist is missing, the editor will start with an empty buffer.	Otherwise exactly
       one out of the following four may be used to choose one or more files to be edited.

       file ..	   A list of filenames.  The first one will be the current file and read into the
		   buffer.  The cursor will be positioned on the first line of the  buffer.   You
		   can	get  to  the  other  files with the ":next" command.  To edit a file that
		   starts with a dash, precede the filelist with "--".

       -	   The file to edit is read from stdin.  Commands are  read  from  stderr,  which
		   should be a tty.

       -t {tag}    The file to edit and the initial cursor position depends on a "tag", a sort of
		   goto label.	{tag} is looked up in the tags file, the associated file  becomes
		   the	current file and the associated command is executed.  Mostly this is used
		   for C programs, in which case {tag} could be a function name.  The  effect  is
		   that the file containing that function becomes the current file and the cursor
		   is positioned on the start of the function.	See ":help tag-commands".

       -q [errorfile]
		   Start in quickFix mode.  The file [errorfile] is read and the first	error  is
		   displayed.	If  [errorfile]  is  omitted,  the  filename is obtained from the
		   'errorfile' option (defaults to "AztecC.Err" for the  Amiga,  "errors.err"  on
		   other  systems).  Further errors can be jumped to with the ":cn" command.  See
		   ":help quickfix".

       Vim behaves differently, depending on the name of the command (the executable may still be
       the same file).

       vim	 The "normal" way, everything is default.

       rview rvim
		 Like  the  above, but with restrictions.  It will not be possible to start shell
		 commands, or suspend Vim.  Can also be done with the "-Z" argument.

OPTIONS
       The options may be given in any order, before or  after	filenames.   Options  without  an
       argument can be combined after a single dash.

       +[num]	   For	the  first file the cursor will be positioned on line "num".  If "num" is
		   missing, the cursor will be positioned on the last line.

       +/{pat}	   For the first file the cursor will be positioned on the  first  occurrence  of
		   {pat}.  See ":help search-pattern" for the available search patterns.

       +{command}

       -c {command}
		   {command}  will  be executed after the first file has been read.  {command} is
		   interpreted as an Ex command.  If the {command} contains  spaces  it  must  be
		   enclosed  in double quotes (this depends on the shell that is used).  Example:
		   Vim "+set si" main.c
		   Note: You can use up to 10 "+" or "-c" commands.

       -S {file}   {file} will be sourced after the first file has been read.  This is equivalent
		   to  -c  "source  {file}".  {file} cannot start with '-'.  If {file} is omitted
		   "Session.vim" is used (only works when -S is the last argument).

       --cmd {command}
		   Like using "-c", but the command is executed just before processing any  vimrc
		   file.   You	can  use up to 10 of these commands, independently from "-c" com-
		   mands.

       -A	   If Vim has been compiled with ARABIC support for  editing  right-to-left  ori-
		   ented  files  and  Arabic  keyboard	mapping, this option starts Vim in Arabic
		   mode, i.e. 'arabic' is set.	Otherwise an  error  message  is  given  and  Vim
		   aborts.

       -b	   Binary  mode.   A  few  options  will  be set that makes it possible to edit a
		   binary or executable file.

       -C	   Compatible.	Set the 'compatible' option.  This will make  Vim  behave  mostly
		   like Vi, even though a .vimrc file exists.

       -d	   Start  in  diff mode.  There should be two, three or four file name arguments.
		   Vim will open all the files and show differences  between  them.   Works  like
		   vimdiff(1).

       -d {device} Open  {device}  for	use  as  a  terminal.	Only  on the Amiga.  Example: "-d
		   con:20/30/600/150".

       -D	   Debugging.  Go to debugging mode when  executing  the  first  command  from	a
		   script.

       -e	   Start Vim in Ex mode, just like the executable was called "ex".

       -E	   Start Vim in improved Ex mode, just like the executable was called "exim".

       -f	   Foreground.	 For the GUI version, Vim will not fork and detach from the shell
		   it was started in.  On the Amiga, Vim is not restarted to open a  new  window.
		   This  option  should  be used when Vim is executed by a program that will wait
		   for the edit session to finish (e.g. mail).	On the Amiga the ":sh"	and  ":!"
		   commands will not work.

       --nofork    Foreground.	 For the GUI version, Vim will not fork and detach from the shell
		   it was started in.

       -F	   If Vim has been compiled with FKMAP support for editing right-to-left oriented
		   files  and  Farsi keyboard mapping, this option starts Vim in Farsi mode, i.e.
		   'fkmap' and 'rightleft' are set.  Otherwise an error message is given and  Vim
		   aborts.

       -g	   If Vim has been compiled with GUI support, this option enables the GUI.  If no
		   GUI support was compiled in, an error message is given and Vim aborts.

       -h	   Give a bit of help about the command line arguments and options.   After  this
		   Vim exits.

       -H	   If Vim has been compiled with RIGHTLEFT support for editing right-to-left ori-
		   ented files and Hebrew keyboard mapping, this  option  starts  Vim  in  Hebrew
		   mode,  i.e.	'hkmap'  and  'rightleft' are set.  Otherwise an error message is
		   given and Vim aborts.

       -i {viminfo}
		   When using the viminfo file is enabled, this option sets the filename to  use,
		   instead of the default "~/.viminfo".  This can also be used to skip the use of
		   the .viminfo file, by giving the name "NONE".

       -L	   Same as -r.

       -l	   Lisp mode.  Sets the 'lisp' and 'showmatch' options on.

       -m	   Modifying files is disabled.  Resets the 'write' option.  You can still modify
		   the buffer, but writing a file is not possible.

       -M	   Modifications  not  allowed.   The  'modifiable'  and  'write' options will be
		   unset, so that changes are not allowed and files can  not  be  written.   Note
		   that these options can be set to enable making modifications.

       -N	   No-compatible mode.	Reset the 'compatible' option.	This will make Vim behave
		   a bit better, but less Vi compatible, even  though  a  .vimrc  file	does  not
		   exist.

       -n	   No  swap file will be used.	Recovery after a crash will be impossible.  Handy
		   if you want to edit a file on a very slow medium (e.g. floppy).  Can  also  be
		   done with ":set uc=0".  Can be undone with ":set uc=200".

       -nb	   Become an editor server for NetBeans.  See the docs for details.

       -o[N]	   Open N windows stacked.  When N is omitted, open one window for each file.

       -O[N]	   Open  N  windows  side  by  side.  When N is omitted, open one window for each
		   file.

       -p[N]	   Open N tab pages.  When N is omitted, open one tab page for each file.

       -R	   Read-only mode.  The 'readonly' option will be set.	You can  still	edit  the
		   buffer,  but  will be prevented from accidently overwriting a file.	If you do
		   want to overwrite a file, add an exclamation mark to the  Ex  command,  as  in
		   ":w!".   The -R option also implies the -n option (see below).  The 'readonly'
		   option can be reset with ":set noro".  See ":help 'readonly'".

       -r	   List swap files, with information about using them for recovery.

       -r {file}   Recovery mode.  The swap file is used to recover a  crashed	editing  session.
		   The	swap  file  is a file with the same filename as the text file with ".swp"
		   appended.  See ":help recovery".

       -s	   Silent mode.  Only when started as "Ex" or when  the  "-e"  option  was  given
		   before the "-s" option.

       -s {scriptin}
		   The	script	file  {scriptin}  is read.  The characters in the file are inter-
		   preted as if you had typed them.  The  same	can  be  done  with  the  command
		   ":source!  {scriptin}".   If  the end of the file is reached before the editor
		   exits, further characters are read from the keyboard.

       -T {terminal}
		   Tells Vim the name of the terminal you are  using.	Only  required	when  the
		   automatic  way  doesn't  work.  Should be a terminal known to Vim (builtin) or
		   defined in the termcap or terminfo file.

       -u {vimrc}  Use the commands in the file {vimrc} for initializations.  All the other  ini-
		   tializations  are  skipped.	Use this to edit a special kind of files.  It can
		   also be used to skip all initializations  by  giving  the  name  "NONE".   See
		   ":help initialization" within vim for more details.

       -U {gvimrc} Use	the commands in the file {gvimrc} for GUI initializations.  All the other
		   GUI initializations are skipped.  It can also be used to skip all GUI initial-
		   izations  by giving the name "NONE".  See ":help gui-init" within vim for more
		   details.

       -V[N]	   Verbose.  Give messages about which files are  sourced  and	for  reading  and
		   writing  a  viminfo	file.	The optional number N is the value for 'verbose'.
		   Default is 10.

       -w {scriptout}
		   All the characters that you type are recorded in the file  {scriptout},  until
		   you	exit  Vim.  This is useful if you want to create a script file to be used
		   with "vim -s" or ":source!".  If the {scriptout} file exists,  characters  are
		   appended.

       -W {scriptout}
		   Like -w, but an existing file is overwritten.

       -x	   Use encryption when writing files.  Will prompt for a crypt key.

       -X	   Don't  connect  to the X server.  Shortens startup time in a terminal, but the
		   window title and clipboard will not be used.

       -y	   Start Vim in easy mode, just like the executable was called "evim" or "eview".
		   Makes Vim behave like a click-and-type editor.

       -Z	   Restricted mode.  Works like the executable starts with "r".

       --	   Denotes  the  end  of  the options.	Arguments after this will be handled as a
		   file name.  This can be used to edit a filename that starts with a '-'.

       --echo-wid  GTK GUI only: Echo the Window ID on stdout.

       --help	   Give a help message and exit, just like "-h".

       --literal   Take file name arguments literally, do not  expand  wildcards.   This  has  no
		   effect on Unix where the shell expands wildcards.

       --noplugin  Skip loading plugins.  Implied by -u NONE.

       --remote    Connect  to	a  Vim server and make it edit the files given in the rest of the
		   arguments.  If no server is found a warning is given and the files are  edited
		   in the current Vim.

       --remote-expr {expr}
		   Connect to a Vim server, evaluate {expr} in it and print the result on stdout.

       --remote-send {keys}
		   Connect to a Vim server and send {keys} to it.

       --remote-silent
		   As --remote, but without the warning when no server is found.

       --remote-wait
		   As --remote, but Vim does not exit until the files have been edited.

       --remote-wait-silent
		   As --remote-wait, but without the warning when no server is found.

       --serverlist
		   List the names of all Vim servers that can be found.

       --servername {name}
		   Use	{name}	as the server name.  Used for the current Vim, unless used with a
		   --remote argument, then it's the name of the server to connect to.

       --socketid {id}
		   GTK GUI only: Use the GtkPlug mechanism to run gvim in another window.

       --version   Print version information and exit.

ON-LINE HELP
       Type ":help" in Vim to get started.  Type ":help subject" to get help on a  specific  sub-
       ject.   For example: ":help ZZ" to get help for the "ZZ" command.  Use <Tab> and CTRL-D to
       complete subjects (":help cmdline-completion").	Tags are present to jump from  one  place
       to  another (sort of hypertext links, see ":help").  All documentation files can be viewed
       in this way, for example ":help syntax.txt".

FILES
       /usr/share/vim/vim72/doc/*.txt
		      The Vim documentation files.  Use ":help doc-file-list" to get the complete
		      list.

       /usr/share/vim/vim72/doc/tags
		      The tags file used for finding information in the documentation files.

       /usr/share/vim/vim72/syntax/syntax.vim
		      System wide syntax initializations.

       /usr/share/vim/vim72/syntax/*.vim
		      Syntax files for various languages.

       /usr/share/vim/vimrc
		      System wide Vim initializations.

       ~/.vimrc       Your personal Vim initializations.

       /usr/share/vim/gvimrc
		      System wide gvim initializations.

       ~/.gvimrc      Your personal gvim initializations.

       /usr/share/vim/vim72/optwin.vim
		      Script used for the ":options" command, a nice way to view and set options.

       /usr/share/vim/vim72/menu.vim
		      System wide menu initializations for gvim.

       /usr/share/vim/vim72/bugreport.vim
		      Script to generate a bug report.	See ":help bugs".

       /usr/share/vim/vim72/filetype.vim
		      Script to detect the type of a file by its name.	See ":help 'filetype'".

       /usr/share/vim/vim72/scripts.vim
		      Script  to  detect  the  type of a file by its contents.	See ":help 'file-
		      type'".

       /usr/share/vim/vim72/print/*.ps
		      Files used for PostScript printing.

       For recent info read the VIM home page:
       <URL:http://www.vim.org/>

SEE ALSO
       vimtutor(1)

AUTHOR
       Most of Vim was made by Bram Moolenaar, with a lot of help from others.	See ":help  cred-
       its" in Vim.
       Vim  is	based on Stevie, worked on by: Tim Thompson, Tony Andrews and G.R. (Fred) Walter.
       Although hardly any of the original code remains.

BUGS
       Probably.  See ":help todo" for a list of known problems.

       Note that a number of things that may be regarded as bugs by some, are in fact caused by a
       too-faithful  reproduction  of  Vi's  behaviour.   And  if you think other things are bugs
       "because Vi does it differently", you should take a closer look at  the	vi_diff.txt  file
       (or  type :help vi_diff.txt when in Vim).  Also have a look at the 'compatible' and 'cpop-
       tions' options.

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +--------------------+-----------------+
       |  ATTRIBUTE TYPE    | ATTRIBUTE VALUE |
       +--------------------+-----------------+
       |Availability	    | SUNWvim	      |
       +--------------------+-----------------+
       |Interface Stability | Uncommitted     |
       +--------------------+-----------------+
NOTES
       Source for vim is available on http://opensolaris.org.

					   2006 Apr 11					   VIM(1)


All times are GMT -4. The time now is 12:49 AM.



All times are GMT -4. The time now is 12:49 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
×
UNIX.COM Login
Username:
Password:  
Show Password