Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages

OpenDarwin 7.2.1 - man page for tcl_alertnotifier (opendarwin section 3)

Notifier(3)			      Tcl Library Procedures			      Notifier(3)

_________________________________________________________________________________________________

NAME
       Tcl_CreateEventSource,	 Tcl_DeleteEventSource,    Tcl_SetMaxBlockTime,   Tcl_QueueEvent,
       Tcl_ThreadQueueEvent, Tcl_ThreadAlert, Tcl_GetCurrentThread, Tcl_DeleteEvents, Tcl_InitNo-
       tifier,	Tcl_FinalizeNotifier, Tcl_WaitForEvent, Tcl_AlertNotifier, Tcl_SetTimer, Tcl_Ser-
       viceAll, Tcl_ServiceEvent, Tcl_GetServiceMode, Tcl_SetServiceMode - the	event  queue  and
       notifier interfaces

SYNOPSIS
       #include <tcl.h>

       void
       Tcl_CreateEventSource(setupProc, checkProc, clientData)

       void
       Tcl_DeleteEventSource(setupProc, checkProc, clientData)

       void
       Tcl_SetMaxBlockTime(timePtr)

       void
       Tcl_QueueEvent(evPtr, position)

       void											  |
       Tcl_ThreadQueueEvent(threadId, evPtr, position)						  |

       void											  |
       Tcl_ThreadAlert(threadId, clientData)							  |

       Tcl_ThreadId										  |
       Tcl_GetCurrentThread()									  |

       void											  |
       Tcl_DeleteEvents(deleteProc, clientData) 						  |

       ClientData										  |
       Tcl_InitNotifier()									  |

       void											  |
       Tcl_FinalizeNotifier(clientData) 							  |

       int											  |
       Tcl_WaitForEvent(timePtr)								  |

       void											  |
       Tcl_AlertNotifier(clientData)								  |

       void											  |
       Tcl_SetTimer(timePtr)									  |

       int											  |
       Tcl_ServiceAll() 									  |

       int											  |
       Tcl_ServiceEvent(flags)									  |

       int											  |
       Tcl_GetServiceMode()									  |

       int											  |
       Tcl_SetServiceMode(mode) 								  |

ARGUMENTS
       Tcl_EventSetupProc    *setupProc     (in)      Procedure  to  invoke  to prepare for event
						      wait in Tcl_DoOneEvent.

       Tcl_EventCheckProc    *checkProc     (in)      Procedure  for  Tcl_DoOneEvent  to   invoke
						      after waiting for events.  Checks to see if
						      any events have occurred and, if so, queues
						      them.

       ClientData	     clientData     (in)      Arbitrary  one-word value to pass to setup-
						      Proc, checkProc, or deleteProc.

       Tcl_Time 	     *timePtr	    (in)      Indicates the maximum  amount  of  time  to
						      wait for an event.  This is specified as an
						      interval (how long to wait), not	an  abso-
						      lute time (when to wakeup).  If the pointer
						      passed  to  Tcl_WaitForEvent  is	NULL,  it
						      means  there is no maximum wait time:  wait
						      forever if necessary.

       Tcl_Event	     *evPtr	    (in)      An event to add to the  event  queue.   The
						      storage  for the event must have been allo-
						      cated by	the  caller  using  Tcl_Alloc  or
						      ckalloc.

       Tcl_QueuePosition     position	    (in)      Where  to  add  the new event in the queue:
						      TCL_QUEUE_TAIL,	  TCL_QUEUE_HEAD,      or
						      TCL_QUEUE_MARK.

       Tcl_ThreadId	     threadId	    (in)      A unique identifier for a thread.

       Tcl_EventDeleteProc   *deleteProc    (in)      Procedure  to  invoke for each queued event
						      in Tcl_DeleteEvents.

       int		     flags	    (in)      What types of  events  to  service.   These
						      flags  are  the  same  as  those	passed to
						      Tcl_DoOneEvent.				  |

       int		     mode	    (in)						  |
						      Indicates whether events should be serviced |
						      by Tcl_ServiceAll.  Must be one of TCL_SER- |
						      VICE_NONE or TCL_SERVICE_ALL.
_________________________________________________________________

INTRODUCTION
       The interfaces described here are used to customize the Tcl event loop.	The two most com-
       mon  customizations  are  to  add new sources of events and to merge Tcl's event loop with
       some other event loop, such as one provided by an application in which  Tcl  is	embedded.
       Each of these tasks is described in a separate section below.

       The  procedures	in  this  manual entry are the building blocks out of which the Tcl event
       notifier is constructed.  The event notifier is the lowest layer in the Tcl  event  mecha-
       nism.  It consists of three things:

       [1]    Event  sources:  these  represent  the  ways in which events can be generated.  For
	      example, there is a timer event source that implements  the  Tcl_CreateTimerHandler
	      procedure  and  the after command, and there is a file event source that implements
	      the Tcl_CreateFileHandler procedure on Unix systems.  An	event  source  must  work
	      with  the  notifier  to  detect events at the right times, record them on the event
	      queue, and eventually notify higher-level software that they  have  occurred.   The
	      procedures  Tcl_CreateEventSource,  Tcl_DeleteEventSource, and Tcl_SetMaxBlockTime,
	      Tcl_QueueEvent, and Tcl_DeleteEvents are used primarily by event sources.

       [2]    The event queue: for non-threaded applications, there is a  single  queue  for  the
	      whole  application, containing events that have been detected but not yet serviced.
	      Event sources place events onto the queue so that they may be processed in order at
	      appropriate  times  during the event loop. The event queue guarantees a fair disci-
	      pline of event handling, so that no event source can starve the  others.	 It  also
	      allows  events  to  be saved for servicing at a future time.  Threaded applications |
	      work in a similar manner, except that there is a	separate  event  queue	for  each |
	      thread  containing  a  Tcl interpreter.  Tcl_QueueEvent is used (primarily by event |
	      sources) to add events to the event queue and Tcl_DeleteEvents is  used  to  remove |
	      events  from  the  queue	without  processing  them.   In  a  threaded application, |
	      Tcl_QueueEvent adds an  event  to  the  current  thread's  queue,  and  Tcl_Thread- |
	      QueueEvent adds an event to a queue in a specific thread. 			  |

       [3]											  |
	      The  event  loop:  in  order to detect and process events, the application enters a |
	      loop that waits for events to occur, places them on the event queue, and then  pro- |
	      cesses   them.	Most   applications   will  do	this  by  calling  the	procedure |
	      Tcl_DoOneEvent, which is described in a separate manual entry.			  |

       Most Tcl applications need not worry about any of the internals of the Tcl notifier.  How- |
       ever,  the  notifier now has enough flexibility to be retargeted either for a new platform |
       or to use an external event loop (such as the Motif event loop, when Tcl is embedded in	a |
       Motif  application).  The procedures Tcl_WaitForEvent and Tcl_SetTimer are normally imple- |
       mented by Tcl, but may be replaced  with  new  versions	to  retarget  the  notifier  (the |
       Tcl_InitNotifier,  Tcl_AlertNotifier,  Tcl_FinalizeNotifier, Tcl_Sleep, Tcl_CreateFileHan- |
       dler, and Tcl_DeleteFileHandler must also be replaced; see CREATING A NEW  NOTIFIER  below |
       for  details).	The  procedures Tcl_ServiceAll, Tcl_ServiceEvent, Tcl_GetServiceMode, and |
       Tcl_SetServiceMode are provided to help connect Tcl's event loop to an external event loop |
       such as Motif's. 									  |

NOTIFIER BASICS 										  |
       The  easiest  way  to  understand  how the notifier works is to consider what happens when
       Tcl_DoOneEvent is called.  Tcl_DoOneEvent is passed a flags argument that  indicates  what
       sort  of  events  it  is  OK  to process and also whether or not to block if no events are
       ready.  Tcl_DoOneEvent does the following things:

       [1]    Check the event queue to see if it contains any events that can  be  serviced.   If
	      so,  service  the  first	possible event, remove it from the queue, and return.  It |
	      does this by calling Tcl_ServiceEvent and passing in the flags argument.

       [2]    Prepare to block for an event.  To do this, Tcl_DoOneEvent invokes a  setup  proce-
	      dure  in	each  event  source.  The event source will perform event-source specific
	      initialization and possibly call Tcl_SetMaxBlockTime to limit  how  long	Tcl_Wait- |
	      ForEvent will block if no new events occur.

       [3]    Call  Tcl_WaitForEvent.	This  procedure  is  implemented differently on different
	      platforms;  it waits for an event to occur, based on the	information  provided  by
	      the  event  sources.  It may cause the application to block if timePtr specifies an
	      interval other than 0.  Tcl_WaitForEvent returns when something has happened,  such
	      as  a  file  becoming readable or the interval given by timePtr expiring.  If there
	      are no events for Tcl_WaitForEvent to wait for, so that  it  would  block  forever,
	      then it returns immediately and Tcl_DoOneEvent returns 0.

       [4]    Call  a  check  procedure  in  each  event  source.  The check procedure determines
	      whether any events of interest to this source occurred.	If  so,  the  events  are
	      added to the event queue.

       [5]    Check  the  event  queue to see if it contains any events that can be serviced.  If
	      so, service the first possible event, remove it from the queue, and return.

       [6]    See if there are idle callbacks pending. If so, invoke all of them and return.

       [7]    Either return 0 to indicate that no events were ready, or go back to  step  [2]  if
	      blocking was requested by the caller.

CREATING A NEW EVENT SOURCE
       An  event  source  consists of three procedures invoked by the notifier, plus additional C
       procedures that are invoked by higher-level code to arrange  for  event-driven  callbacks.
       The  three  procedures  called  by  the notifier consist of the setup and check procedures
       described above, plus an additional procedure that is invoked when  an  event  is  removed
       from the event queue for servicing.

       The procedure Tcl_CreateEventSource creates a new event source.	Its arguments specify the
       setup procedure and check procedure for the event source.  SetupProc should match the fol-
       lowing prototype:
	      typedef void Tcl_EventSetupProc(
		ClientData clientData,
		int flags);
       The  clientData	argument  will	be  the  same  as  the	clientData  argument  to Tcl_Cre-
       ateEventSource;	it is typically used to point to private information managed by the event
       source.	  The  flags  argument	will  be  the  same  as  the  flags  argument  passed  to
       Tcl_DoOneEvent  except  that  it  will  never  be  0  (Tcl_DoOneEvent  replaces	 0   with
       TCL_ALL_EVENTS).   Flags  indicates  what kinds of events should be considered; if the bit
       corresponding to this event source isn't set, the event source should  return  immediately
       without doing anything.	For example, the file event source checks for the TCL_FILE_EVENTS
       bit.

       SetupProc's job is to make sure that the application wakes up when events of  the  desired
       type  occur.   This is typically done in a platform-dependent fashion.  For example, under
       Unix an event source might call Tcl_CreateFileHandler;  under  Windows  it  might  request
       notification with a Windows event.  For timer-driven event sources such as timer events or
       any polled event, the event source can call Tcl_SetMaxBlockTime to force  the  application
       to  wake  up  after  a specified time even if no events have occurred.  If no event source |
       calls Tcl_SetMaxBlockTime then Tcl_WaitForEvent will wait as  long  as  necessary  for  an |
       event  to  occur;  otherwise, it will only wait as long as the shortest interval passed to |
       Tcl_SetMaxBlockTime by one of the event sources.  If an event source knows that it already |
       has  events  ready  to report, it can request a zero maximum block time.  For example, the |
       setup procedure for the X event source looks to see if there are  events  already  queued. |
       If  there  are,	it calls Tcl_SetMaxBlockTime with a 0 block time so that Tcl_WaitForEvent |
       does not block if there is no new data on the  X  connection.   The  timePtr  argument  to
       Tcl_WaitForEvent  points  to  a	structure  that  describes a time interval in seconds and
       microseconds:
	      typedef struct Tcl_Time {
		long sec;
		long usec;
	      } Tcl_Time;
       The usec field should be less than 1000000.

       Information provided to Tcl_SetMaxBlockTime is only used for the next  call  to	Tcl_Wait- |
       ForEvent;  it is discarded after Tcl_WaitForEvent returns.  The next time an event wait is
       done each of the event sources' setup procedures will be called again, and they can  spec-
       ify new information for that event wait.

       If  the	application  uses  an  external  event loop rather than Tcl_DoOneEvent, the event |
       sources may need to call Tcl_SetMaxBlockTime at other times.  For example, if a new  event |
       handler	is  registered	that needs to poll for events, the event source may call Tcl_Set- |
       MaxBlockTime to set the block time to zero to force the external event loop to  call  Tcl. |
       In  this  case,	Tcl_SetMaxBlockTime  invokes Tcl_SetTimer with the shortest interval seen |
       since the last call to Tcl_DoOneEvent or Tcl_ServiceAll. 				  |

       In addition to the generic procedure Tcl_SetMaxBlockTime, other	platform-specific  proce- |
       dures  may  also  be available for setupProc, if there is additional information needed by |
       Tcl_WaitForEvent on that platform.  For example, on Unix systems the Tcl_CreateFileHandler |
       interface can be used to wait for file events.

       The  second  procedure  provided by each event source is its check procedure, indicated by
       the checkProc argument to Tcl_CreateEventSource.  CheckProc must match the following  pro-
       totype:
	      typedef void Tcl_EventCheckProc(
		ClientData clientData,
		int flags);
       The arguments to this procedure are the same as those for setupProc.  CheckProc is invoked
       by Tcl_DoOneEvent after it has waited for events.  Presumably at least one event source is
       now  prepared  to queue an event.  Tcl_DoOneEvent calls each of the event sources in turn,
       so they all have a chance to queue any events that are ready.  The  check  procedure  does
       two  things.  First, it must see if any events have triggered.  Different event sources do
       this in different ways.

       If an event source's check procedure detects an interesting event, it must add  the  event
       to Tcl's event queue.  To do this, the event source calls Tcl_QueueEvent.  The evPtr argu-
       ment is a pointer to a dynamically allocated structure containing the event (see below for
       more information on memory management issues).  Each event source can define its own event
       structure with whatever information is relevant to that event source.  However, the  first
       element	of  the  structure must be a structure of type Tcl_Event, and the address of this
       structure is used when communicating between the event source and the rest  of  the  noti-
       fier.  A Tcl_Event has the following definition:
	      typedef struct {
		  Tcl_EventProc *proc;
		  struct Tcl_Event *nextPtr;
	      } Tcl_Event;
       The  event  source must fill in the proc field of the event before calling Tcl_QueueEvent.
       The nextPtr is used to link together the events in the queue and should not be modified by
       the event source.

       An  event  may  be added to the queue at any of three positions, depending on the position
       argument to Tcl_QueueEvent:

       TCL_QUEUE_TAIL	       Add the event at the back of the queue, so that all other  pending
			       events  will  be  serviced first.  This is almost always the right
			       place for new events.

       TCL_QUEUE_HEAD	       Add the event at the front of the queue, so that it will  be  ser-
			       viced before all other queued events.

       TCL_QUEUE_MARK	       Add  the  event	at the front of the queue, unless there are other
			       events at the front whose position is TCL_QUEUE_MARK;  if so,  add
			       the  new  event	just after all other TCL_QUEUE_MARK events.  This
			       value of position is used to insert an ordered sequence of  events
			       at  the	front  of  the queue, such as a series of Enter and Leave
			       events synthesized during a grab or ungrab operation in Tk.

       When it is time to handle an event from the queue (steps 1 and 4  above)  Tcl_ServiceEvent |
       will  invoke  the proc specified in the first queued Tcl_Event structure.  Proc must match
       the following prototype:
	      typedef int Tcl_EventProc(
		Tcl_Event *evPtr,
		int flags);
       The first argument to proc is a pointer to the event, which will be the same as the  first
       argument  to  the Tcl_QueueEvent call that added the event to the queue.  The second argu-
       ment to proc is the flags argument for the current call to Tcl_ServiceEvent;  this is used |
       by the event source to return immediately if its events are not relevant.

       It is up to proc to handle the event, typically by invoking one or more Tcl commands or C-
       level callbacks.  Once the event source has finished handling the event it  returns  1  to
       indicate  that  the  event  can	be  removed from the queue.  If for some reason the event
       source decides that the event cannot be handled at this time, it may return 0 to  indicate
       that  the  event  should  be deferred for processing later;  in this case Tcl_ServiceEvent |
       will go on to the next event in the queue and attempt to service it.   There  are  several
       reasons	why an event source might defer an event.  One possibility is that events of this
       type are excluded by the flags argument.  For example, the file event source  will  always
       return  0  if  the  TCL_FILE_EVENTS  bit isn't set in flags.  Another example of deferring
       events happens in Tk if Tk_RestrictEvents has been invoked to defer certain kinds of  win-
       dow events.

       When  proc returns 1, Tcl_ServiceEvent will remove the event from the event queue and free |
       its storage.  Note that the storage for an event must be allocated  by  the  event  source |
       (using  Tcl_Alloc  or the Tcl macro ckalloc) before calling Tcl_QueueEvent, but it will be |
       freed by Tcl_ServiceEvent, not by the event source.					  |

       Threaded applications work in a similar manner, except that  there  is  a  separate  event |
       queue  for  each  thread containing a Tcl interpreter.  Calling Tcl_QueueEvent in a multi- |
       threaded application adds an event to the current thread's queue.   To  add  an	event  to |
       another	thread's  queue,  use  Tcl_ThreadQueueEvent.   Tcl_ThreadQueueEvent accepts as an |
       argument a Tcl_ThreadId argument, which uniquely identifies a thread in a Tcl application. |
       To obtain the Tcl_ThreadID for the current thread, use the Tcl_GetCurrentThread procedure. |
       (A thread would then need to pass this identifier to other threads for those threads to be |
       able  to  add  events to its queue.)  After adding an event to another thread's queue, you |
       then typically need to call Tcl_ThreadAlert to "wake up" that thread's notifier	to  alert |
       it to the new event.									  |

       Tcl_DeleteEvents can be used to explicitly remove one or more events from the event queue. |
       Tcl_DeleteEvents calls proc for each event in the queue, deleting those for with the  pro- |
       cedure  returns	1.  Events for which the procedure returns 0 are left in the queue.  Proc |
       should match the following prototype:							  |
	      typedef int Tcl_EventDeleteProc(							  |
		Tcl_Event *evPtr,								  |
		ClientData clientData); 							  |
       The clientData argument will be the same as the clientData argument  to	Tcl_DeleteEvents; |
       it  is  typically  used	to point to private information managed by the event source.  The |
       evPtr will point to the next event in the queue. 					  |

       Tcl_DeleteEventSource deletes an event source.  The setupProc, checkProc,  and  clientData |
       arguments  must	exactly  match	those provided to the Tcl_CreateEventSource for the event |
       source to be deleted.  If no such source exists, Tcl_DeleteEventSource has no effect.

CREATING A NEW NOTIFIER
       The notifier consists  of  all  the  procedures	described  in  this  manual  entry,  plus
       Tcl_DoOneEvent and Tcl_Sleep, which are available on all platforms, and Tcl_CreateFileHan- |
       dler and Tcl_DeleteFileHandler, which are Unix-specific.  Most  of  these  procedures  are |
       generic,  in  that  they are the same for all notifiers.  However, eight of the procedures |
       are   notifier-dependent:   Tcl_InitNotifier,   Tcl_AlertNotifier,   Tcl_FinalizeNotifier, |
       Tcl_SetTimer,  Tcl_Sleep,  Tcl_WaitForEvent,  Tcl_CreateFileHandler and Tcl_DeleteFileHan- |
       dler.  To support a new platform or to integrate Tcl with  an  application-specific  event |
       loop, you must write new versions of these procedures.					  |

       Tcl_InitNotifier  initializes  the  notifier  state  and  returns a handle to the notifier |
       state.  Tcl  calls  this  procedure  when  initializing	a  Tcl	interpreter.   Similarly, |
       Tcl_FinalizeNotifier  shuts down the notifier, and is called by Tcl_Finalize when shutting |
       down a Tcl interpreter.									  |

       Tcl_WaitForEvent is the lowest-level procedure in the  notifier;  it  is  responsible  for |
       waiting	for  an  ``interesting''  event  to  occur or for a given time to elapse.  Before |
       Tcl_WaitForEvent is invoked, each of the event sources' setup  procedure  will  have  been |
       invoked.   The timePtr argument to Tcl_WaitForEvent gives the maximum time to block for an |
       event, based on calls to Tcl_SetMaxBlockTime made by setup procedures and on other  infor- |
       mation (such as the TCL_DONT_WAIT bit in flags). 					  |

       Ideally,  Tcl_WaitForEvent  should only wait for an event to occur; it should not actually |
       process the event in any way.  Later on, the event sources will process the raw events and |
       create  Tcl_Events  on  the  event  queue in their checkProc procedures.  However, on some |
       platforms (such as Windows) this isn't possible; events	may  be  processed  in	Tcl_Wait- |
       ForEvent, including queuing Tcl_Events and more (for example, callbacks for native widgets |
       may be invoked).  The return value from Tcl_WaitForEvent must be either 0, 1, or  -1.   On |
       platforms  such	as Windows where events get processed in Tcl_WaitForEvent, a return value |
       of 1 means that there may be more events still pending that haven't been processed.   This |
       is  a  sign to the caller that it must call Tcl_WaitForEvent again if it wants all pending |
       events to be processed. A 0 return value means that calling  Tcl_WaitForEvent  again  will |
       not  have  any effect: either this is a platform where Tcl_WaitForEvent only waits without |
       doing any event processing, or Tcl_WaitForEvent knows for sure that  there  are	no  addi- |
       tional  events  to process (e.g. it returned because the time elapsed).	Finally, a return |
       value of -1 means that the event loop is no longer operational and the application  should |
       probably  unwind  and  terminate.   Under  Windows  this happens when a WM_QUIT message is |
       received; under Unix it happens when Tcl_WaitForEvent would have  waited  forever  because |
       there were no active event sources and the timeout was infinite. 			  |

       Tcl_AlertNotifier  is  used in multithreaded applications to allow any thread to "wake up" |
       the notifier to alert it to new events on its queue.   Tcl_AlertNotifier  requires  as  an |
       argument the notifier handle returned by Tcl_InitNotifier.				  |

       If  the	notifier  will be used with an external event loop, then it must also support the |
       Tcl_SetTimer interface.	Tcl_SetTimer is invoked by Tcl_SetMaxBlockTime whenever the maxi- |
       mum  blocking  time  has been reduced.  Tcl_SetTimer should arrange for the external event |
       loop to invoke Tcl_ServiceAll  after  the  specified  interval  even  if  no  events  have |
       occurred.   This  interface is needed because Tcl_WaitForEvent isn't invoked when there is |
       an external event loop.	If the notifier will  only  be	used  from  Tcl_DoOneEvent,  then |
       Tcl_SetTimer need not do anything.							  |

       On  Unix  systems,  the	file event source also needs support from the notifier.  The file |
       event source consists of the Tcl_CreateFileHandler and  Tcl_DeleteFileHandler  procedures, |
       which are described in the Tcl_CreateFileHandler manual page.				  |

       The  Tcl_Sleep  and  Tcl_DoOneEvent  interfaces	are  described in their respective manual |
       pages.											  |

       The easiest way to create a new notifier is to look at the code for an existing	notifier, |
       such  as  the  files unix/tclUnixNotfy.c or win/tclWinNotify.c in the Tcl source distribu- |
       tion.											  |

EXTERNAL EVENT LOOPS										  |
       The notifier interfaces are designed so that Tcl can be embedded  into  applications  that |
       have  their  own  private  event  loops.   In  this  case,  the	application does not call |
       Tcl_DoOneEvent except in the case of recursive event loops such as calls to the	Tcl  com- |
       mands update or vwait.  Most of the time is spent in the external event loop of the appli- |
       cation.	In this case the notifier must arrange for the external event loop to  call  back |
       into  Tcl when something happens on the various Tcl event sources.  These callbacks should |
       arrange for appropriate Tcl events to be placed on the Tcl event queue.			  |

       Because the external event loop is not calling Tcl_DoOneEvent on a regular basis, it is up |
       to  the	notifier to arrange for Tcl_ServiceEvent to be called whenever events are pending |
       on the Tcl event queue.	The easiest way to do this is to invoke Tcl_ServiceAll at the end |
       of  each  callback  from  the external event loop.  This will ensure that all of the event |
       sources are polled, any queued events are serviced, and any pending idle handlers are pro- |
       cessed  before returning control to the application.  In addition, event sources that need |
       to poll for events can call Tcl_SetMaxBlockTime to force the external event loop  to  call |
       Tcl even if no events are available on the system event queue.				  |

       As  a  side  effect of processing events detected in the main external event loop, Tcl may |
       invoke  Tcl_DoOneEvent  to  start  a  recursive	event  loop  in  commands   like   vwait. |
       Tcl_DoOneEvent  will  invoke  the  external  event loop, which will result in callbacks as |
       described in the preceding paragraph, which will result in calls to Tcl_ServiceAll.   How- |
       ever,  in  these  cases	it is undesirable to service events in Tcl_ServiceAll.	Servicing |
       events there is unnecessary because control will immediately return to the external  event |
       loop  and  hence  to  Tcl_DoOneEvent,  which  can service the events itself.  Furthermore, |
       Tcl_DoOneEvent is supposed to service only a single event, whereas Tcl_ServiceAll normally |
       services  all  pending  events.	 To handle this situation, Tcl_DoOneEvent sets a flag for |
       Tcl_ServiceAll that causes it to return without servicing any events.  This flag is called |
       the service mode; Tcl_DoOneEvent restores it to its previous value before it returns.	  |

       In some cases, however, it may be necessary for Tcl_ServiceAll to service events even when |
       it has been invoked from Tcl_DoOneEvent.  This happens when there is yet another recursive |
       event loop invoked via an event handler called by Tcl_DoOneEvent (such as one that is part |
       of a native widget).  In this case, Tcl_DoOneEvent may not have a chance to service events |
       so  Tcl_ServiceAll must service them all.  Any recursive event loop that calls an external |
       event loop rather than Tcl_DoOneEvent must reset the service mode so that all  events  get |
       processed  in  Tcl_ServiceAll.  This is done by invoking the Tcl_SetServiceMode procedure. |
       If Tcl_SetServiceMode is passed TCL_SERVICE_NONE, then calls to Tcl_ServiceAll will return |
       immediately  without  processing  any  events.	If  Tcl_SetServiceMode is passed TCL_SER- |
       VICE_ALL, then calls to Tcl_ServiceAll will behave normally.   Tcl_SetServiceMode  returns |
       the  previous  value of the service mode, which should be restored when the recursive loop |
       exits.  Tcl_GetServiceMode returns the current value of the service mode.

SEE ALSO
       Tcl_CreateFileHandler, Tcl_DeleteFileHandler, Tcl_Sleep, Tcl_DoOneEvent, Thread(3)

KEYWORDS
       event, notifier, event queue, event sources,  file  events,  timer,  idle,  service  mode,
       threads

Tcl					       8.1				      Notifier(3)


All times are GMT -4. The time now is 07:52 PM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
UNIX.COM Login
Username:
Password:  
Show Password