Unix/Linux Go Back    


OpenDarwin 7.2.1 - man page for stty (opendarwin section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)


STTY(1) 			   BSD General Commands Manual				  STTY(1)

NAME
     stty -- set the options for a terminal device interface

SYNOPSIS
     stty [-a | -e | -g] [-f file] [operands]

DESCRIPTION
     The stty utility sets or reports on terminal characteristics for the device that is its
     standard input.  If no options or operands are specified, it reports the settings of a sub-
     set of characteristics as well as additional ones if they differ from their default values.
     Otherwise it modifies the terminal state according to the specified arguments.  Some combi-
     nations of arguments are mutually exclusive on some terminal types.

     The following options are available:

     -a      Display all the current settings for the terminal to standard output as per IEEE Std
	     1003.2 (``POSIX.2'').

     -e      Display all the current settings for the terminal to standard output in the tradi-
	     tional BSD ``all'' and ``everything'' formats.

     -f      Open and use the terminal named by file rather than using standard input.	The file
	     is opened using the O_NONBLOCK flag of open(), making it possible to set or display
	     settings on a terminal that might otherwise block on the open.

     -g      Display all the current settings for the terminal to standard output in a form that
	     may be used as an argument to a subsequent invocation of stty to restore the current
	     terminal state as per IEEE Std 1003.2 (``POSIX.2'').

     The following arguments are available to set the terminal characteristics:

   Control Modes:
     Control mode flags affect hardware characteristics associated with the terminal.  This cor-
     responds to the c_cflag in the termios structure.

     parenb (-parenb)
		 Enable (disable) parity generation and detection.

     parodd (-parodd)
		 Select odd (even) parity.

     cs5 cs6 cs7 cs8
		 Select character size, if possible.

     number	 Set terminal baud rate to the number given, if possible.  If the baud rate is
		 set to zero, modem control is no longer asserted.

     ispeed number
		 Set terminal input baud rate to the number given, if possible.  If the input
		 baud rate is set to zero, the input baud rate is set to the value of the output
		 baud rate.

     ospeed number
		 Set terminal output baud rate to the number given, if possible.  If the output
		 baud rate is set to zero, modem control is no longer asserted.

     speed number
		 This sets both ispeed and ospeed to number.

     hupcl (-hupcl)
		 Stop asserting modem control (do not stop asserting modem control) on last
		 close.

     hup (-hup)  Same as hupcl (-hupcl).

     cstopb (-cstopb)
		 Use two (one) stop bits per character.

     cread (-cread)
		 Enable (disable) the receiver.

     clocal (-clocal)
		 Assume a line without (with) modem control.

     crtscts (-crtscts)
		 Enable (disable) RTS/CTS flow control.

   Input Modes:
     This corresponds to the c_iflag in the termios structure.

     ignbrk (-ignbrk)
		 Ignore (do not ignore) break on input.

     brkint (-brkint)
		 Signal (do not signal) INTR on break.

     ignpar (-ignpar)
		 Ignore (do not ignore) characters with parity errors.

     parmrk (-parmrk)
		 Mark (do not mark) characters with parity errors.

     inpck (-inpck)
		 Enable (disable) input parity checking.

     istrip (-istrip)
		 Strip (do not strip) input characters to seven bits.

     inlcr (-inlcr)
		 Map (do not map) NL to CR on input.

     igncr (-igncr)
		 Ignore (do not ignore) CR on input.

     icrnl (-icrnl)
		 Map (do not map) CR to NL on input.

     ixon (-ixon)
		 Enable (disable) START/STOP output control.  Output from the system is stopped
		 when the system receives STOP and started when the system receives START, or if
		 ixany is set, any character restarts output.

     ixoff (-ixoff)
		 Request that the system send (not send) START/STOP characters when the input
		 queue is nearly empty/full.

     ixany (-ixany)
		 Allow any character (allow only START) to restart output.

     imaxbel (-imaxbel)
		 The system imposes a limit of MAX_INPUT (currently 255) characters in the input
		 queue.  If imaxbel is set and the input queue limit has been reached, subsequent
		 input causes the system to send an ASCII BEL character to the output queue (the
		 terminal beeps at you).  Otherwise, if imaxbel is unset and the input queue is
		 full, the next input character causes the entire input and output queues to be
		 discarded.

   Output Modes:
     This corresponds to the c_oflag of the termios structure.

     opost (-opost)
		 Post-process output (do not post-process output; ignore all other output modes).

     onlcr (-onlcr)
		 Map (do not map) NL to CR-NL on output.

     ocrnl (-ocrnl)
		 Map (do not map) CR to NL on output.

     oxtabs (-oxtabs)
		 Expand (do not expand) tabs to spaces on output.

     onocr (-onocr)
		 Do not (do) output CRs at column zero.

     onlret (-onlret)
		 On the terminal NL performs (does not perform) the CR function.

   Local Modes:
     Local mode flags (lflags) affect various and sundry characteristics of terminal processing.
     Historically the term "local" pertained to new job control features implemented by Jim Kulp
     on a Pdp 11/70 at IIASA.  Later the driver ran on the first VAX at Evans Hall, UC Berkeley,
     where the job control details were greatly modified but the structure definitions and names
     remained essentially unchanged.  The second interpretation of the 'l' in lflag is ``line
     discipline flag'' which corresponds to the c_lflag of the termios structure.

     isig (-isig)
		 Enable (disable) the checking of characters against the special control charac-
		 ters INTR, QUIT, and SUSP.

     icanon (-icanon)
		 Enable (disable) canonical input (ERASE and KILL processing).

     iexten (-iexten)
		 Enable (disable) any implementation defined special control characters not cur-
		 rently controlled by icanon, isig, or ixon.

     echo (-echo)
		 Echo back (do not echo back) every character typed.

     echoe (-echoe)
		 The ERASE character shall (shall not) visually erase the last character in the
		 current line from the display, if possible.

     echok (-echok)
		 Echo (do not echo) NL after KILL character.

     echoke (-echoke)
		 The KILL character shall (shall not) visually erase the current line from the
		 display, if possible.

     echonl (-echonl)
		 Echo (do not echo) NL, even if echo is disabled.

     echoctl (-echoctl)
		 If echoctl is set, echo control characters as ^X.  Otherwise control characters
		 echo as themselves.

     echoprt (-echoprt)
		 For printing terminals.  If set, echo erased characters backwards within ``\''
		 and ``/''.  Otherwise, disable this feature.

     noflsh (-noflsh)
		 Disable (enable) flush after INTR, QUIT, SUSP.

     tostop (-tostop)
		 Send (do not send) SIGTTOU for background output.  This causes background jobs
		 to stop if they attempt terminal output.

     altwerase (-altwerase)
		 Use (do not use) an alternate word erase algorithm when processing WERASE char-
		 acters.  This alternate algorithm considers sequences of alphanumeric/under-
		 scores as words.  It also skips the first preceding character in its classifica-
		 tion (as a convenience since the one preceding character could have been erased
		 with simply an ERASE character.)

     mdmbuf (-mdmbuf)
		 If set, flow control output based on condition of Carrier Detect.  Otherwise
		 writes return an error if Carrier Detect is low (and Carrier is not being
		 ignored with the CLOCAL flag.)

     flusho (-flusho)
		 Indicates output is (is not) being discarded.

     pendin (-pendin)
		 Indicates input is (is not) pending after a switch from non-canonical to canoni-
		 cal mode and will be re-input when a read becomes pending or more input arrives.

   Control Characters:
     control-character string
		 Set control-character to string.  If string is a single character, the control
		 character is set to that character.  If string is the two character sequence
		 "^-" or the string "undef" the control character is disabled (i.e. set to
		 {_POSIX_VDISABLE}.)

		 Recognized control-characters:

		       control-
		       character    Subscript	 Description
		       _________    _________	 _______________
		       eof	    VEOF	 EOF character
		       eol	    VEOL	 EOL character
		       eol2	    VEOL2	 EOL2 character
		       erase	    VERASE	 ERASE character
		       erase2	    VERASE2	 ERASE2 character
		       werase	    VWERASE	 WERASE character
		       intr	    VINTR	 INTR character
		       kill	    VKILL	 KILL character
		       quit	    VQUIT	 QUIT character
		       susp	    VSUSP	 SUSP character
		       start	    VSTART	 START character
		       stop	    VSTOP	 STOP character
		       dsusp	    VDSUSP	 DSUSP character
		       lnext	    VLNEXT	 LNEXT character
		       reprint	    VREPRINT	 REPRINT character
		       status	    VSTATUS	 STATUS character

     min number

     time number
		 Set the value of min or time to number.  MIN and TIME are used in Non-Canonical
		 mode input processing (-icanon).

   Combination Modes:
     saved settings
		 Set the current terminal characteristics to the saved settings produced by the
		 -g option.

     evenp or parity
		 Enable parenb and cs7; disable parodd.

     oddp	 Enable parenb, cs7, and parodd.

     -parity, -evenp, -oddp
		 Disable parenb, and set cs8.

     nl (-nl)	 Enable (disable) icrnl.  In addition -nl unsets inlcr and igncr.

     ek 	 Reset ERASE, ERASE2, and KILL characters back to system defaults.

     sane	 Resets all modes to reasonable values for interactive terminal use.

     tty	 Set the line discipline to the standard terminal line discipline TTYDISC.

     crt (-crt)  Set (disable) all modes suitable for a CRT display device.

     kerninfo (-kerninfo)
		 Enable (disable) the system generated status line associated with processing a
		 STATUS character (usually set to ^T).	The status line consists of the system
		 load average, the current command name, its process ID, the event the process is
		 waiting on (or the status of the process), the user and system times, percent
		 cpu, and current memory usage.

     columns number
		 The terminal size is recorded as having number columns.

     cols number
		 is an alias for columns.

     rows number
		 The terminal size is recorded as having number rows.

     dec	 Set modes suitable for users of Digital Equipment Corporation systems (ERASE,
		 KILL, and INTR characters are set to ^?, ^U, and ^C; ixany is disabled, and crt
		 is enabled.)

     extproc (-extproc)
		 If set, this flag indicates that some amount of terminal processing is being
		 performed by either the terminal hardware or by the remote side connected to a
		 pty.

     raw (-raw)  If set, change the modes of the terminal so that no input or output processing
		 is performed.	If unset, change the modes of the terminal to some reasonable
		 state that performs input and output processing.  Note that since the terminal
		 driver no longer has a single RAW bit, it is not possible to intuit what flags
		 were set prior to setting raw.  This means that unsetting raw may not put back
		 all the setting that were previously in effect.  To set the terminal into a raw
		 state and then accurately restore it, the following shell code is recommended:

		 save_state=$(stty -g)
		 stty raw
		 ...
		 stty "$save_state"

     size	 The size of the terminal is printed as two numbers on a single line, first rows,
		 then columns.

   Compatibility Modes:
     These modes remain for compatibility with the previous version of the stty command.

     all	 Reports all the terminal modes as with stty -a except that the control charac-
		 ters are printed in a columnar format.

     everything  Same as all.

     cooked	 Same as sane.

     cbreak	 If set, enables brkint, ixon, imaxbel, opost, isig, iexten, and -icanon.  If
		 unset, same as sane.

     new	 Same as tty.

     old	 Same as tty.

     newcrt (-newcrt)
		 Same as crt.

     pass8	 The converse of parity.

     tandem (-tandem)
		 Same as ixoff.

     decctlq (-decctlq)
		 The converse of ixany.

     crterase (-crterase)
		 Same as echoe.

     crtbs (-crtbs)
		 Same as echoe.

     crtkill (-crtkill)
		 Same as echoke.

     ctlecho (-ctlecho)
		 Same as echoctl.

     prterase (-prterase)
		 Same as echoprt.

     litout (-litout)
		 The converse of opost.

     tabs (-tabs)
		 The converse of oxtabs.

     brk value	 Same as the control character eol.

     flush value
		 Same as the control character discard.

     rprnt value
		 Same as the control character reprint.

DIAGNOSTICS
     The stty utility exits 0 on success, and >0 if an error occurs.

SEE ALSO
     termios(4)

STANDARDS
     The stty utility is expected to be IEEE Std 1003.2 (``POSIX.2'') compatible.  The flags -e
     and -f are extensions to the standard.

BSD					  April 18, 1994				      BSD
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums


All times are GMT -4. The time now is 08:01 PM.