Home Man
Today's Posts

Linux & Unix Commands - Search Man Pages

NetBSD 6.1.5 - man page for sigpending1 (netbsd section 9)

SIGNAL(9)			  BSD Kernel Developer's Manual 			SIGNAL(9)

     signal, siginit, sigactsinit, sigactsunshare, sigactsfree, execsigs, sigaction1,
     sigprocmask1, sigpending1, sigsuspend1, sigaltstack1, pgsignal, kpgsignal, psignal,
     kpsignal, issignal, postsig, killproc, sigexit, trapsignal, sendsig, sigcode, sigtramp --
     software signal facilities

     #include <sys/signal.h>
     #include <sys/signalvar.h>

     siginit(struct proc *p);

     sigactsinit(struct proc *pp, int share);

     sigactsunshare(struct proc *p);

     sigactsfree(struct proc *p);

     execsigs(struct proc *p);

     sigaction1(struct lwp *l, int signum, const struct sigaction *nsa, struct sigaction *osa,
	 void *tramp, int vers);

     sigprocmask1(struct lwp *l, int how, const sigset_t *nss, sigset_t *oss);

     sigpending1(struct lwp *l, sigset_t *ss);

     sigsuspend1(struct lwp *l, const sigset_t *ss);

     sigaltstack1(struct lwp *l, const struct sigaltstack *nss, struct sigaltstack *oss);

     pgsignal(struct pgrp *pgrp, int signum, int checkctty);

     kpgsignal(struct pgrp *pgrp, ksiginfo_t *ks, void *data, int checkctty);

     psignal(struct proc *p, int signum);

     kpsignal(struct proc *p, ksiginfo_t *ks, void *data);

     issignal(struct lwp *l);

     postsig(int signum);

     killproc(struct proc *p, const char *why);

     sigexit(struct lwp *l, int signum);

     trapsignal(struct lwp *l, const ksiginfo_t *ks);

     sendsig(const ksiginfo_t *ks, const sigset_t *mask);

     The system defines a set of signals that may be delivered to a process.  These functions
     implement the kernel portion of the signal facility.

     Signal numbers used throughout the kernel signal facilities should always be within the
     range of [1-NSIG].

     Most of the kernel's signal infrastructure is implemented in machine-independent code.
     Machine-dependent code provides support for invoking a process's signal handler, restoring
     context when the signal handler returns, generating signals when hardware traps occur, trig-
     gering the delivery of signals when a process is about to return from the kernel to

     The signal state for a process is contained in struct sigctx.  This includes the list of
     signals with delivery pending, information about the signal handler stack, the signal mask,
     and the address of the signal trampoline.

     The registered signal handlers for a process are recorded in struct sigacts.  This structure
     may be shared by multiple processes.

     The kernel's signal facilities are implemented by the following functions:


	    This function initializes the signal state of proc0 to the system default.	This sig-
	    nal state is then inherited by init(8) when it is started by the kernel.

     sigactsinit(pp, share)

	    This function creates an initial struct sigacts for the process pp.  If the share
	    argument is non-zero, then pp shares the struct sigacts by holding a reference.  Oth-
	    erwise, pp receives a new struct sigacts which is copied from the parent.


	    This function causes the process p to no longer share its struct sigacts The current
	    state of the signal actions is maintained in the new copy.


	    This function decrements the reference count on the struct sigacts of process p.  If
	    the reference count reaches zero, the struct sigacts is freed.


	    This function is used to reset the signal state of the process p to the system
	    defaults when the process execs a new program image.

     sigaction1(l, signum, nsa, osa, tramp, vers)

	    This function implements the sigaction(2) system call.  The tramp and vers arguments
	    provide support for userspace signal trampolines.  Trampoline version 0 is reserved
	    for the legacy kernel-provided signal trampoline; tramp must be NULL in this case.
	    Otherwise, vers specifies the ABI of the trampoline specified by tramp.  The signal
	    trampoline ABI is machine-dependent, and must be coordinated with the sendsig() func-

     sigprocmask1(l, how, nss, oss)

	    This function implements the sigprocmask(2) system call.

     sigpending1(l, ss)

	    This function implements the sigpending(2) system call.

     sigsuspend1(l, ss)

	    This function implements the sigsuspend(2) system call.

     sigaltstack1(l, nss, oss)

	    This function implements the sigaltstack(2) system call.

     pgsignal(pgrp, signum, checkctty)

	    This is a wrapper function for kpgsignal() which is described below.

     kpgsignal(pgrp, ks, data, checkctty)

	    Schedule the signal ks->ksi_signo to be delivered to all members of the process group
	    pgrp.  If checkctty is non-zero, the signal is only sent to processes which have a
	    controlling terminal.  The data argument and the complete signal scheduling semantics
	    are described in the kpsignal() function below.

     trapsignal(l, ks)

	    Sends the signal ks->ksi_signo caused by a hardware trap to the current process.

     psignal(p, signum)

	    This is a wrapper function for kpsignal() which is described below.

     kpsignal(p, ks, data)

	    Schedule the signal ks->ksi_signo to be delivered to the process p.  The data argu-
	    ment, if not NULL, points to the file descriptor data that caused the signal to be
	    generated in the SIGIO case.

	    With a few exceptions noted below, the target process signal disposition is updated
	    and is marked as runnable, so further handling of the signal is done in the context
	    of the target process after a context switch; see issignal() below.  Note that
	    kpsignal() does not by itself cause a context switch to happen.

	    The target process is not marked as runnable in the following cases:

		  o   The target process is sleeping uninterruptibly.  The signal will be noticed
		      when the process returns from the system call or trap.

		  o   The target process is currently ignoring the signal.

		  o   If a stop signal is sent to a sleeping process that takes the default
		      action (see sigaction(2)), the process is stopped without awakening it.

		  o   SIGCONT restarts a stopped process (or puts them back to sleep) regardless
		      of the signal action (e.g., blocked or ignored).

	    If the target process is being traced, kpsignal() behaves as if the target process
	    were taking the default action for signum.	This allows the tracing process to be
	    notified of the signal.


	    This function determines which signal, if any, is to be posted to the current
	    process.  A signal is to be posted if:

		  o   The signal has a handler provided by the program image.

		  o   The signal should cause the process to dump core and/or terminate.

		  o   The signal should interrupt the current system call.

	    Signals which cause the process to be stopped are handled within issignal() directly.

	    issignal() should be called by machine-dependent code when returning to userspace
	    from a system call or other trap or interrupt by using the following code:

		  while (signum = CURSIG(curproc))


	    The postsig() function is used to invoke the action for the signal signum in the cur-
	    rent process.  If the default action of a signal is to terminate the process, and the
	    signal does not have a registered handler, the process exits using sigexit(), dumping
	    a core image if necessary.

     killproc(p, why)

	    This function sends a SIGKILL signal to the specified process.  The message provided
	    by why is sent to the system log and is also displayed on the process's controlling

     sigexit(l, signum)

	    This function forces the current process to exit with the signal signum, generating a
	    core file if appropriate.  No checks are made for masked or caught signals; the
	    process always exits.

     sendsig(ks, mask)

	    This function is provided by machine-dependent code, and is used to invoke a signal
	    handler for the current process.  sendsig() must prepare the registers and stack of
	    the current process to invoke the signal handler stored in the process's struct
	    sigacts.  This may include switching to an alternate signal stack specified by the
	    process.  The previous register, stack, and signal state are stored in a ucontext_t,
	    which is then copied out to the user's stack.

	    The registers and stack must be set up to invoke the signal handler as follows:

		  (*handler)(int signum, siginfo_t *info, void *ctx)

	    where signum is the signal number, info contains additional signal specific informa-
	    tion when SA_SIGINFO is specified when setting up the signal handler.  ctx is the
	    pointer to ucontext_t on the user's stack.	The registers and stack must also arrange
	    for the signal handler to return to the signal trampoline.	The trampoline is then
	    used to return to the code which was executing when the signal was delivered using
	    the setcontext(2) system call.

	    For performance reasons, it is recommended that sendsig() arrange for the signal han-
	    dler to be invoked directly on architectures where it is convenient to do so.  In
	    this case, the trampoline is used only for the signal return path.	If it is not fea-
	    sible to directly invoke the signal handler, the trampoline is also used to invoke
	    the handler, performing any final set up that was not possible for sendsig() to per-

	    sendsig() must invoke the signal trampoline with the correct ABI.  The ABI of the
	    signal trampoline is specified on a per-signal basis in the sigacts() structure for
	    the process.  Trampoline version 0 is reserved for the legacy kernel-provided, on-
	    stack signal trampoline.  All other trampoline versions indicate a specific trampo-
	    line ABI.  This ABI is coordinated with machine-dependent code in the system C

     The signal trampoline is a special piece of code which provides support for invoking the
     signal handlers for a process.  The trampoline is used to return from the signal handler
     back to the code which was executing when the signal was delivered, and is also used to
     invoke the handler itself on architectures where it is not feasible to have the kernel
     invoke the handler directly.

     In traditional UNIX systems, the signal trampoline, also referred to as the ``sigcode'', is
     provided by the kernel and copied to the top of the user's stack when a new process is cre-
     ated or a new program image is exec'd.  Starting in NetBSD 2.0, the signal trampoline is
     provided by the system C library.	This allows for more flexibility when the signal facility
     is extended, makes dealing with signals easier in debuggers, such as gdb(1), and may also
     enhance system security by allowing the kernel to disallow execution of code on the stack.

     The signal trampoline is specified on a per-signal basis.	The correct trampoline is
     selected automatically by the C library when a signal handler is registered by a process.

     Signal trampolines have a special naming convention which enables debuggers to determine the
     characteristics of the signal handler and its arguments.  Trampoline functions are named
     like so:



     <flavor>	The flavor of the signal handler.  The following flavors are valid:

		sigcontext    Specifies a traditional BSD-style (deprecated) signal handler with
			      the following signature:

			      void (*handler)(int signum,
				      int code,
				      struct sigcontext *scp);

		siginfo       Specifies a POSIX-style signal handler with the following signa-

			      void (*handler)(int signum,
				      siginfo_t *si,
				      void *uc);

			      Note: sigcontext style signal handlers are deprecated, and retained
			      only for compatibility with older binaries.

     <version>	Specifies the ABI version of the signal trampoline.  The trampoline ABI is coor-
		dinated with the machine-dependent kernel sendsig() function.  The trampoline
		version needs to be unique even across different trampoline flavors, in order to
		simplify trampoline selection in the kernel.

     The following is an example if a signal trampoline name which indicates that the trampoline
     is used for traditional BSD-style signal handlers and implements version 1 of the signal
     trampoline ABI:


     The current signal trampoline is:


     sigaction(2), signal(7), condvar(9)

BSD					  April 29, 2010				      BSD

All times are GMT -4. The time now is 01:02 PM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
Show Password