Unix/Linux Go Back    


NetBSD 6.1.5 - man page for openssl.cnf (netbsd section 5)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)


CONFIG(5)				     OpenSSL					CONFIG(5)

NAME
       config - OpenSSL CONF library configuration files

DESCRIPTION
       The OpenSSL CONF library can be used to read configuration files.  It is used for the
       OpenSSL master configuration file openssl.cnf and in a few other places like SPKAC files
       and certificate extension files for the x509 utility. OpenSSL applications can also use
       the CONF library for their own purposes.

       A configuration file is divided into a number of sections. Each section starts with a line
       [ section_name ] and ends when a new section is started or end of file is reached. A
       section name can consist of alphanumeric characters and underscores.

       The first section of a configuration file is special and is referred to as the default
       section this is usually unnamed and is from the start of file until the first named
       section. When a name is being looked up it is first looked up in a named section (if any)
       and then the default section.

       The environment is mapped onto a section called ENV.

       Comments can be included by preceding them with the # character

       Each section in a configuration file consists of a number of name and value pairs of the
       form name=value

       The name string can contain any alphanumeric characters as well as a few punctuation
       symbols such as . , ; and _.

       The value string consists of the string following the = character until end of line with
       any leading and trailing white space removed.

       The value string undergoes variable expansion. This can be done by including the form $var
       or ${var}: this will substitute the value of the named variable in the current section. It
       is also possible to substitute a value from another section using the syntax
       $section::name or ${section::name}. By using the form $ENV::name environment variables can
       be substituted. It is also possible to assign values to environment variables by using the
       name ENV::name, this will work if the program looks up environment variables using the
       CONF library instead of calling getenv() directly.

       It is possible to escape certain characters by using any kind of quote or the \ character.
       By making the last character of a line a \ a value string can be spread across multiple
       lines. In addition the sequences \n, \r, \b and \t are recognized.

OPENSSL LIBRARY CONFIGURATION
       In OpenSSL 0.9.7 and later applications can automatically configure certain aspects of
       OpenSSL using the master OpenSSL configuration file, or optionally an alternative
       configuration file. The openssl utility includes this functionality: any sub command uses
       the master OpenSSL configuration file unless an option is used in the sub command to use
       an alternative configuration file.

       To enable library configuration the default section needs to contain an appropriate line
       which points to the main configuration section. The default name is openssl_conf which is
       used by the openssl utility. Other applications may use an alternative name such as
       myapplicaton_conf.

       The configuration section should consist of a set of name value pairs which contain
       specific module configuration information. The name represents the name of the
       configuration module the meaning of the value is module specific: it may, for example,
       represent a further configuration section containing configuration module specific
       information. E.g.

	openssl_conf = openssl_init

	[openssl_init]

	oid_section = new_oids
	engines = engine_section

	[new_oids]

	... new oids here ...

	[engine_section]

	... engine stuff here ...

       Currently there are two configuration modules. One for ASN1 objects another for ENGINE
       configuration.

   ASN1 OBJECT CONFIGURATION MODULE
       This module has the name oid_section. The value of this variable points to a section
       containing name value pairs of OIDs: the name is the OID short and long name, the value is
       the numerical form of the OID. Although some of the openssl utility sub commands already
       have their own ASN1 OBJECT section functionality not all do. By using the ASN1 OBJECT
       configuration module all the openssl utility sub commands can see the new objects as well
       as any compliant applications. For example:

	[new_oids]

	some_new_oid = 1.2.3.4
	some_other_oid = 1.2.3.5

       In OpenSSL 0.9.8 it is also possible to set the value to the long name followed by a comma
       and the numerical OID form. For example:

	shortName = some object long name, 1.2.3.4

   ENGINE CONFIGURATION MODULE
       This ENGINE configuration module has the name engines. The value of this variable points
       to a section containing further ENGINE configuration information.

       The section pointed to by engines is a table of engine names (though see engine_id below)
       and further sections containing configuration information specific to each ENGINE.

       Each ENGINE specific section is used to set default algorithms, load dynamic, perform
       initialization and send ctrls. The actual operation performed depends on the command name
       which is the name of the name value pair. The currently supported commands are listed
       below.

       For example:

	[engine_section]

	# Configure ENGINE named "foo"
	foo = foo_section
	# Configure ENGINE named "bar"
	bar = bar_section

	[foo_section]
	... foo ENGINE specific commands ...

	[bar_section]
	... "bar" ENGINE specific commands ...

       The command engine_id is used to give the ENGINE name. If used this command must be first.
       For example:

	[engine_section]
	# This would normally handle an ENGINE named "foo"
	foo = foo_section

	[foo_section]
	# Override default name and use "myfoo" instead.
	engine_id = myfoo

       The command dynamic_path loads and adds an ENGINE from the given path. It is equivalent to
       sending the ctrls SO_PATH with the path argument followed by LIST_ADD with value 2 and
       LOAD to the dynamic ENGINE. If this is not the required behaviour then alternative ctrls
       can be sent directly to the dynamic ENGINE using ctrl commands.

       The command init determines whether to initialize the ENGINE. If the value is 0 the ENGINE
       will not be initialized, if 1 and attempt it made to initialized the ENGINE immediately.
       If the init command is not present then an attempt will be made to initialize the ENGINE
       after all commands in its section have been processed.

       The command default_algorithms sets the default algorithms an ENGINE will supply using the
       functions ENGINE_set_default_string()

       If the name matches none of the above command names it is assumed to be a ctrl command
       which is sent to the ENGINE. The value of the command is the argument to the ctrl command.
       If the value is the string EMPTY then no value is sent to the command.

       For example:

	[engine_section]

	# Configure ENGINE named "foo"
	foo = foo_section

	[foo_section]
	# Load engine from DSO
	dynamic_path = /some/path/fooengine.so
	# A foo specific ctrl.
	some_ctrl = some_value
	# Another ctrl that doesn't take a value.
	other_ctrl = EMPTY
	# Supply all default algorithms
	default_algorithms = ALL

NOTES
       If a configuration file attempts to expand a variable that doesn't exist then an error is
       flagged and the file will not load. This can happen if an attempt is made to expand an
       environment variable that doesn't exist. For example in a previous version of OpenSSL the
       default OpenSSL master configuration file used the value of HOME which may not be defined
       on non Unix systems and would cause an error.

       This can be worked around by including a default section to provide a default value: then
       if the environment lookup fails the default value will be used instead. For this to work
       properly the default value must be defined earlier in the configuration file than the
       expansion. See the EXAMPLES section for an example of how to do this.

       If the same variable exists in the same section then all but the last value will be
       silently ignored. In certain circumstances such as with DNs the same field may occur
       multiple times. This is usually worked around by ignoring any characters before an initial
       . e.g.

	1.OU="My first OU"
	2.OU="My Second OU"

EXAMPLES
       Here is a sample configuration file using some of the features mentioned above.

	# This is the default section.

	HOME=/temp
	RANDFILE= ${ENV::HOME}/.rnd
	configdir=$ENV::HOME/config

	[ section_one ]

	# We are now in section one.

	# Quotes permit leading and trailing whitespace
	any = " any variable name "

	other = A string that can \
	cover several lines \
	by including \\ characters

	message = Hello World\n

	[ section_two ]

	greeting = $section_one::message

       This next example shows how to expand environment variables safely.

       Suppose you want a variable called tmpfile to refer to a temporary filename. The directory
       it is placed in can determined by the the TEMP or TMP environment variables but they may
       not be set to any value at all. If you just include the environment variable names and the
       variable doesn't exist then this will cause an error when an attempt is made to load the
       configuration file. By making use of the default section both values can be looked up with
       TEMP taking priority and /tmp used if neither is defined:

	TMP=/tmp
	# The above value is used if TMP isn't in the environment
	TEMP=$ENV::TMP
	# The above value is used if TEMP isn't in the environment
	tmpfile=${ENV::TEMP}/tmp.filename

BUGS
       Currently there is no way to include characters using the octal \nnn form. Strings are all
       null terminated so nulls cannot form part of the value.

       The escaping isn't quite right: if you want to use sequences like \n you can't use any
       quote escaping on the same line.

       Files are loaded in a single pass. This means that an variable expansion will only work if
       the variables referenced are defined earlier in the file.

SEE ALSO
       openssl_x509(1), openssl_req(1), openssl_ca(1)

1.0.1i					    2014-04-08					CONFIG(5)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums


All times are GMT -4. The time now is 06:39 AM.