Unix VIO vs Dynamic LPAR

10 More Discussions You Might Find Interesting

1. AIX

VIO and LPAR disk/fcs communications

:wall::wall::wall: 1. I have created an LPAR in the HMC. 2. I have allocated the storage from an Hitachi AMS2500 and assigned it to the host group. 3. I have zoned the LPAR and Storage on a Brocade 5100. (The zone sees the AMS) Next I activated the LPAR in the HMC, SMS mode for the mksysb...

2. AIX

cdrom confusion on the vio client lpar

Hi In my vio server I have the below output $ lsvopt | grep -i SAPSITGS sapsitgs_cdrom TL12UP.iso 3182 In my vio client lpar I have the below output root@sapsitgs:/ # lsdev -Cc cdromcd0 Available Virtual SCSI Optical Served by VIO Server cd1...

3. AIX

VIO server does not show new LPAR

Hi All, I've been trying to create a new LPAR for some days now but I can't get the VIO server to recognize the new LPAR. This is what I did: On HMC create new LPAR On HMC create new virtual scsi adapter for LPAR in VIO profile On HMC add new virtual scsi adapter for LPAR with DLPAR...

4. AIX

Possible to connect a LPAR to two different VIO's?

Just a question which may seem dumb to some out there, but then again I am not a super technie so that's my excuse. Is it possible to say provision a test AIX LPAR (has a 10gb boot lun and 20gb data) under a VIO which has connectivity to SAN Array A so it can see the disks provisioned to it,...

5. AIX

LPAR - What is my VIO (hostname, IP, ...)

I am wondering if there is a command I can run from **with-in** LPAR server (server01) to find out the hostname or IP address or other parameters for VIO server in charge of server01?

6. AIX

CDROM Issue on LPAR HMC VIO

Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR. How can I do it without rebooting the LPARS. POWER6 with HMC LPARS = AIX 6.1 Any info developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ... But...

7. AIX

VIO Backing Disk LPAR how to find which one ?

hello Folks, my vio: $ lsmap -all SVSA Physloc Client Partition ID --------------- -------------------------------------------- ------------------ vhost0 U9117.MMA.6534BE4-V2-C11 0x00000003 VTD ...

8. AIX

LPAR and vio disk mapping

We have a frame the uses 2 vios that assign disk storage to LPAR's. We have a LPAr with multiple disk and I want to know how do I tell which vio is serving the disk. For example the LPAr has hdisk 0, 1, 2, 3 all the same size. I want to know which vio is serving hdisk0, 1.

9. AIX

Lost root password in LPAR (VIO Server).

Hi, I've lost the root password in a virtual partition created in a IBM Vio Server. May I recover that somehow? Thanks

10. AIX

Restoring mksysb to vio lpar?

I have a standard template I deploy for each of my AIX servers. It's in a mksysb format which I pulled via the nim server after I originally set it up. I'm trying to restore this mksysb over the wire to a remote system. The remote system is an lpar running under vio (no HMC attached). The disk...

LEARN ABOUT CENTOS

slapo-dyngroup

SLAPO-DYNGROUP(5)						File Formats Manual						 SLAPO-DYNGROUP(5)

NAME

       slapo-dyngroup - Dynamic Group overlay to slapd

SYNOPSIS

       /etc/openldap/slapd.conf

DESCRIPTION

       The  Dynamic  Group overlay allows clients to use LDAP Compare operations to test the membership of a dynamic group the same way they would
       check against a static group. Compare operations targeting a group's static member attribute will be intercepted  and  tested  against  the
       configured dynamic group's URL attribute.

       Note  that  this  intercept only happens if the actual Compare operation does not return a LDAP_COMPARE_TRUE result. So if a group has both
       static and dynamic members, the static member list will be checked first.

CONFIGURATION

       This slapd.conf option applies to the Dynamic Group overlay.  It should appear after the overlay directive.

       attrpair <memberAttr> <URLattr>
	      Specify the attributes to be compared. A compare operation on the memberAttr will cause the URLattr to be evaluated for the result.

EXAMPLES

	 database bdb
	 ...
	 overlay dyngroup
	 attrpair member memberURL

FILES

       /etc/openldap/slapd.conf
	      default slapd configuration file

SEE ALSO

       slapd.conf(5), slapd-config(5).

AUTHOR

       Howard Chu

OpenLDAP 2.4.39 						    2014/01/26							 SLAPO-DYNGROUP(5)

UNIX for Dummies Questions & Answers