SSH-KEYGEN(1) BSD General Commands Manual SSH-KEYGEN(1)
ssh-keygen -- authentication key generation, management and conversion
ssh-keygen [-q] [-b bits] -t type [-N new_passphrase] [-C comment] [-f output_keyfile]
ssh-keygen -p [-P old_passphrase] [-N new_passphrase] [-f keyfile]
ssh-keygen -i [-m key_format] [-f input_keyfile]
ssh-keygen -e [-m key_format] [-f input_keyfile]
ssh-keygen -y [-f input_keyfile]
ssh-keygen -c [-P passphrase] [-C comment] [-f keyfile]
ssh-keygen -l [-f input_keyfile]
ssh-keygen -B [-f input_keyfile]
ssh-keygen -D pkcs11
ssh-keygen -F hostname [-f known_hosts_file] [-l]
ssh-keygen -H [-f known_hosts_file]
ssh-keygen -R hostname [-f known_hosts_file]
ssh-keygen -r hostname [-f input_keyfile] [-g]
ssh-keygen -G output_file [-v] [-b bits] [-M memory] [-S start_point]
ssh-keygen -T output_file -f input_file [-v] [-a num_trials] [-W generator]
ssh-keygen -s ca_key -I certificate_identity [-h] [-n principals] [-O option] [-V validity_interval] [-z serial_number] file ...
ssh-keygen -L [-f input_keyfile]
ssh-keygen generates, manages and converts authentication keys for ssh(1). ssh-keygen can create RSA keys for use by SSH protocol version 1
and DSA, ECDSA or RSA keys for use by SSH protocol version 2. The type of key to be generated is specified with the -t option. If invoked
without any arguments, ssh-keygen will generate an RSA key for use in SSH protocol 2 connections.
ssh-keygen is also used to generate groups for use in Diffie-Hellman group exchange (DH-GEX). See the MODULI GENERATION section for details.
Normally each user wishing to use SSH with public key authentication runs this once to create the authentication key in ~/.ssh/identity,
~/.ssh/id_ecdsa, ~/.ssh/id_dsa or ~/.ssh/id_rsa. Additionally, the system administrator may use this to generate host keys, as seen in
Normally this program generates the key and asks for a file in which to store the private key. The public key is stored in a file with the
same name but ``.pub'' appended. The program also asks for a passphrase. The passphrase may be empty to indicate no passphrase (host keys
must have an empty passphrase), or it may be a string of arbitrary length. A passphrase is similar to a password, except it can be a phrase
with a series of words, punctuation, numbers, whitespace, or any string of characters you want. Good passphrases are 10-30 characters long,
are not simple sentences or otherwise easily guessable (English prose has only 1-2 bits of entropy per character, and provides very bad
passphrases), and contain a mix of upper and lowercase letters, numbers, and non-alphanumeric characters. The passphrase can be changed
later by using the -p option.
There is no way to recover a lost passphrase. If the passphrase is lost or forgotten, a new key must be generated and the corresponding pub-
lic key copied to other machines.
For RSA1 keys, there is also a comment field in the key file that is only for convenience to the user to help identify the key. The comment
can tell what the key is for, or whatever is useful. The comment is initialized to ``user@host'' when the key is created, but can be changed
using the -c option.
After a key is generated, instructions below detail where the keys should be placed to be activated.
The options are as follows:
-A For each of the key types (rsa1, rsa, dsa and ecdsa) for which host keys do not exist, generate the host keys with the default key
file path, an empty passphrase, default bits for the key type, and default comment. This is used by /etc/rc to generate new host
Specifies the number of primality tests to perform when screening DH-GEX candidates using the -T command.
-B Show the bubblebabble digest of specified private or public key file.
Specifies the number of bits in the key to create. For RSA keys, the minimum size is 768 bits and the default is 2048 bits. Gener-
ally, 2048 bits is considered sufficient. DSA keys must be exactly 1024 bits as specified by FIPS 186-2. For ECDSA keys, the -b
flag determines they key length by selecting from one of three elliptic curve sizes: 256, 384 or 521 bits. Attempting to use bit
lengths other than these three values for ECDSA keys will fail.
Provides a new comment.
-c Requests changing the comment in the private and public key files. This operation is only supported for RSA1 keys. The program will
prompt for the file containing the private keys, for the passphrase if the key has one, and for the new comment.
Download the RSA public keys provided by the PKCS#11 shared library pkcs11. When used in combination with -s, this option indicates
that a CA key resides in a PKCS#11 token (see the CERTIFICATES section for details).
-e This option will read a private or public OpenSSH key file and print to stdout the key in one of the formats specified by the -m
option. The default export format is ``RFC4716''. This option allows exporting OpenSSH keys for use by other programs, including
several commercial SSH implementations.
Search for the specified hostname in a known_hosts file, listing any occurrences found. This option is useful to find hashed host
names or addresses and may also be used in conjunction with the -H option to print found keys in a hashed format.
Specifies the filename of the key file.
Generate candidate primes for DH-GEX. These primes must be screened for safety (using the -T option) before use.
-g Use generic DNS format when printing fingerprint resource records using the -r command.
-H Hash a known_hosts file. This replaces all hostnames and addresses with hashed representations within the specified file; the origi-
nal content is moved to a file with a .old suffix. These hashes may be used normally by ssh and sshd, but they do not reveal identi-
fying information should the file's contents be disclosed. This option will not modify existing hashed hostnames and is therefore
safe to use on files that mix hashed and non-hashed names.
-h When signing a key, create a host certificate instead of a user certificate. Please see the CERTIFICATES section for details.
Specify the key identity when signing a public key. Please see the CERTIFICATES section for details.
-i This option will read an unencrypted private (or public) key file in the format specified by the -m option and print an OpenSSH com-
patible private (or public) key to stdout. This option allows importing keys from other software, including several commercial SSH
implementations. The default import format is ``RFC4716''.
-L Prints the contents of a certificate.
-l Show fingerprint of specified public key file. Private RSA1 keys are also supported. For RSA and DSA keys ssh-keygen tries to find
the matching public key file and prints its fingerprint. If combined with -v, an ASCII art representation of the key is supplied
with the fingerprint.
Specify the amount of memory to use (in megabytes) when generating candidate moduli for DH-GEX.
Specify a key format for the -i (import) or -e (export) conversion options. The supported key formats are: ``RFC4716'' (RFC
4716/SSH2 public or private key), ``PKCS8'' (PEM PKCS8 public key) or ``PEM'' (PEM public key). The default conversion format is
Provides the new passphrase.
Specify one or more principals (user or host names) to be included in a certificate when signing a key. Multiple principals may be
specified, separated by commas. Please see the CERTIFICATES section for details.
Specify a certificate option when signing a key. This option may be specified multiple times. Please see the CERTIFICATES section
for details. The options that are valid for user certificates are:
clear Clear all enabled permissions. This is useful for clearing the default set of permissions so permissions may be added indi-
Forces the execution of command instead of any shell or command specified by the user when the certificate is used for
Disable ssh-agent(1) forwarding (permitted by default).
Disable port forwarding (permitted by default).
no-pty Disable PTY allocation (permitted by default).
Disable execution of ~/.ssh/rc by sshd(8) (permitted by default).
Disable X11 forwarding (permitted by default).
Allows ssh-agent(1) forwarding.
Allows port forwarding.
Allows PTY allocation.
Allows execution of ~/.ssh/rc by sshd(8).
Allows X11 forwarding.
Restrict the source addresses from which the certificate is considered valid. The address_list is a comma-separated list of
one or more address/netmask pairs in CIDR format.
At present, no options are valid for host keys.
Provides the (old) passphrase.
-p Requests changing the passphrase of a private key file instead of creating a new private key. The program will prompt for the file
containing the private key, for the old passphrase, and twice for the new passphrase.
-q Silence ssh-keygen. Used by /etc/rc.d/sshd when creating a new key.
Removes all keys belonging to hostname from a known_hosts file. This option is useful to delete hashed hosts (see the -H option
Print the SSHFP fingerprint resource record named hostname for the specified public key file.
Specify start point (in hex) when generating candidate moduli for DH-GEX.
Certify (sign) a public key using the specified CA key. Please see the CERTIFICATES section for details.
Test DH group exchange candidate primes (generated using the -G option) for safety.
Specifies the type of key to create. The possible values are ``rsa1'' for protocol version 1 and ``dsa'', ``ecdsa'' or ``rsa'' for
protocol version 2.
Specify a validity interval when signing a certificate. A validity interval may consist of a single time, indicating that the cer-
tificate is valid beginning now and expiring at that time, or may consist of two times separated by a colon to indicate an explicit
time interval. The start time may be specified as a date in YYYYMMDD format, a time in YYYYMMDDHHMMSS format or a relative time (to
the current time) consisting of a minus sign followed by a relative time in the format described in the TIME FORMATS section of
sshd_config(5). The end time may be specified as a YYYYMMDD date, a YYYYMMDDHHMMSS time or a relative time starting with a plus
For example: ``+52w1d'' (valid from now to 52 weeks and one day from now), ``-4w:+4w'' (valid from four weeks ago to four weeks from
now), ``20100101123000:20110101123000'' (valid from 12:30 PM, January 1st, 2010 to 12:30 PM, January 1st, 2011), ``-1d:20110101''
(valid from yesterday to midnight, January 1st, 2011).
-v Verbose mode. Causes ssh-keygen to print debugging messages about its progress. This is helpful for debugging moduli generation.
Multiple -v options increase the verbosity. The maximum is 3.
Specify desired generator when testing candidate moduli for DH-GEX.
-y This option will read a private OpenSSH format file and print an OpenSSH public key to stdout.
Specifies a serial number to be embedded in the certificate to distinguish this certificate from others from the same CA. The
default serial number is zero.
ssh-keygen may be used to generate groups for the Diffie-Hellman Group Exchange (DH-GEX) protocol. Generating these groups is a two-step
process: first, candidate primes are generated using a fast, but memory intensive process. These candidate primes are then tested for suit-
ability (a CPU-intensive process).
Generation of primes is performed using the -G option. The desired length of the primes may be specified by the -b option. For example:
# ssh-keygen -G moduli-2048.candidates -b 2048
By default, the search for primes begins at a random point in the desired length range. This may be overridden using the -S option, which
specifies a different start point (in hex).
Once a set of candidates have been generated, they must be tested for suitability. This may be performed using the -T option. In this mode
ssh-keygen will read candidates from standard input (or a file specified using the -f option). For example:
# ssh-keygen -T moduli-2048 -f moduli-2048.candidates
By default, each candidate will be subjected to 100 primality tests. This may be overridden using the -a option. The DH generator value
will be chosen automatically for the prime under consideration. If a specific generator is desired, it may be requested using the -W option.
Valid generator values are 2, 3, and 5.
Screened DH groups may be installed in /etc/moduli. It is important that this file contains moduli of a range of bit lengths and that both
ends of a connection share common moduli.
ssh-keygen supports signing of keys to produce certificates that may be used for user or host authentication. Certificates consist of a pub-
lic key, some identity information, zero or more principal (user or host) names and a set of options that are signed by a Certification
Authority (CA) key. Clients or servers may then trust only the CA key and verify its signature on a certificate rather than trusting many
user/host keys. Note that OpenSSH certificates are a different, and much simpler, format to the X.509 certificates used in ssl(8).
ssh-keygen supports two types of certificates: user and host. User certificates authenticate users to servers, whereas host certificates
authenticate server hosts to users. To generate a user certificate:
$ ssh-keygen -s /path/to/ca_key -I key_id /path/to/user_key.pub
The resultant certificate will be placed in /path/to/user_key-cert.pub. A host certificate requires the -h option:
$ ssh-keygen -s /path/to/ca_key -I key_id -h /path/to/host_key.pub
The host certificate will be output to /path/to/host_key-cert.pub.
It is possible to sign using a CA key stored in a PKCS#11 token by providing the token library using -D and identifying the CA key by provid-
ing its public half as an argument to -s:
$ ssh-keygen -s ca_key.pub -D libpkcs11.so -I key_id host_key.pub
In all cases, key_id is a "key identifier" that is logged by the server when the certificate is used for authentication.
Certificates may be limited to be valid for a set of principal (user/host) names. By default, generated certificates are valid for all users
or hosts. To generate a certificate for a specified set of principals:
$ ssh-keygen -s ca_key -I key_id -n user1,user2 user_key.pub
$ ssh-keygen -s ca_key -I key_id -h -n host.domain user_key.pub
Additional limitations on the validity and use of user certificates may be specified through certificate options. A certificate option may
disable features of the SSH session, may be valid only when presented from particular source addresses or may force the use of a specific
command. For a list of valid certificate options, see the documentation for the -O option above.
Finally, certificates may be defined with a validity lifetime. The -V option allows specification of certificate start and end times. A
certificate that is presented at a time outside this range will not be considered valid. By default, certificates have a maximum validity
For certificates to be used for user or host authentication, the CA public key must be trusted by sshd(8) or ssh(1). Please refer to those
manual pages for details.
Contains the protocol version 1 RSA authentication identity of the user. This file should not be readable by anyone but the user.
It is possible to specify a passphrase when generating the key; that passphrase will be used to encrypt the private part of this file
using 3DES. This file is not automatically accessed by ssh-keygen but it is offered as the default file for the private key. ssh(1)
will read this file when a login attempt is made.
Contains the protocol version 1 RSA public key for authentication. The contents of this file should be added to
~/.ssh/authorized_keys on all machines where the user wishes to log in using RSA authentication. There is no need to keep the con-
tents of this file secret.
Contains the protocol version 2 DSA, ECDSA or RSA authentication identity of the user. This file should not be readable by anyone
but the user. It is possible to specify a passphrase when generating the key; that passphrase will be used to encrypt the private
part of this file using 128-bit AES. This file is not automatically accessed by ssh-keygen but it is offered as the default file for
the private key. ssh(1) will read this file when a login attempt is made.
Contains the protocol version 2 DSA, ECDSA or RSA public key for authentication. The contents of this file should be added to
~/.ssh/authorized_keys on all machines where the user wishes to log in using public key authentication. There is no need to keep the
contents of this file secret.
Contains Diffie-Hellman groups used for DH-GEX. The file format is described in moduli(5).
ssh(1), ssh-add(1), ssh-agent(1), moduli(5), sshd(8)
The Secure Shell (SSH) Public Key File Format, RFC 4716, 2006.
OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
Theo de Raadt and Dug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the support for SSH
protocol versions 1.5 and 2.0.
April 13 2011 BSD