FIRMWAREPASSWD(8) BSD System Manager's Manual FIRMWAREPASSWD(8)NAME
firmwarepasswd -- tool for setting and removing firmware passwords on a system
SYNOPSIS
firmwarepasswd [-setpasswd] [-setmode mode] [-mode] [-check] [-delete] [-verify] [-unlockseed] [-h]
DESCRIPTION
The firmwarepasswd command is used to add or remove firmware passwords from a system as well as check status and other options. The
firmwarepasswd command requires root privileges to run.
A list of flags and their descriptions:
-setpasswd
Prompts to add a new firmware password or change and existing password if one exists.
-setmode mode
Set the mode to "command" or "full". "Command" will prompt for the firmware password if the user attempts to boot from a different
volume. "Full" will prompt on every startup (not recommended).
-mode Displays the current mode if one is set.
-check Displays whether or not a firmware password is set.
-delete
Prompts for password and clears both password and the mode if correct.
-verify
Prompts for password and displays success if correct.
-unlockseed
Generates a firmware password recovery key. Note: Machine must be stable for this command to generate a valid seed. No pending
changes that need a restart. NOTE: Seed is only valid until the next time a firmware password command runs.
-h Displays a list of all the commands available in the firmwarepasswd tool, with explanatory information.
FILES
/usr/sbin/firmwarepasswd
OS X April 9, 2014 OS X
Check Out this Related Man Page
dxchpwd(1X)dxchpwd(1X)NAME
dxchpwd - Create or change password program
SYNOPSIS
dxchpwd
dxchpwd -r | -l
dxchpwd [-r | -l] -q
dxchpwd [-r | -l] -u username
OPTIONS
If dxchpwd is invoked without any options, it is assumed that the current user's password is to be changed. The following options are also
accepted: Tells dxchpwd that the password change is to be done for a Local user. This can be combined with the -u and -q options. Tells
dxchpwd that the password change is to be done for a NIS user. This can only be done from a NIS master and can be combined with the -u and
-q options. Tells dxchpwd to query the user for the user name of the account whose password is to be changed. Tells dxchpwd to change
this user's password.
DESCRIPTION
The dxchpwd command lets you change your password. When you invoke the dxchpwd command, the program prompts you for the old password and
then for the new password. Next, the program asks you for the new password again, to verify that you have typed it correctly. Note that
the passwords are not displayed on the screen.
Your new password must meet the length requirements specified by the authorization database for the user whose password is being changed.
If your system is running with enhanced security, you may have to choose a password from a list of randomly generated passwords or you may
be prohibited from changing your password until its minimum lifetime has expired, as specified in the authorization database.
EXAMPLES
The following example requests that the password be changed for user smith: dxchpwd -u smith
FILES
Password file Protected Password Database dxchpwd executable
SEE ALSO X(1X), xdm(1X), passwd(1)dxchpwd(1X)
Hi, am a new comer to the AIX side.
i had 3 specific questions.
1) what is firmware
2) how to locate the firmware running on a unix server
3) how to do firmware update(is it something i download from IBM site)
thanks everybody for taking the time and plz reply.
karthik (5 Replies)
Hi friends,
I am having ibm pseries615c3 server. previously i set privileged access password for the firmware. Now i forgot that password. Help me to reset or remove the firmware password from the server. Otherwise anyone plz help me how to change the default boot device in pseries servers. I... (8 Replies)
Dear Gurus,
May i know how to use check_status.sh command in a Unix server?
First Try: check_status.sh
I was prompt: check_status.sh: not found
2nd Try: sh check_status.sh
i was prompt: check_status.sh: check_status.sh: cannot open
It was then later i try to use google to find an... (5 Replies)
Lets says I have 2 HMC's A and B, connected to a p570 managed system.
Right now the firmware level of the p570 is EM320_076 and that needs to be upgraded to EM340_095.
Now the HMC's are at V7R3.3 and as per the code matrix the HMC's needs to be upgraded to V7R3.4 Servicepack 2.
Now my... (5 Replies)
Hi:
I have a Sun Blade 1500 and when I do the Jumpstart with
command "boot net - install" asking for the password of the firmware
and I was not that password. There any way to reset this password.
Thank you very much (7 Replies)
Hey all!
I recently aquired a Sun V210 running Solaris 10. I got past the firmware password, and now I'm trying to get past the root password. I booted directly into single user mode from the ok prompt "boot cdrom -s"
Once in.. every time I try to mount the harddrive "mount /dev/dsk/c0t0d0s0... (9 Replies)
Hi!
I am working on mac osx and have a script which prompts for password for a non-root user, can I avoid that?
su -m <user>
Prompts for a password.
Its a startup script and the start up fails?
How can I fix this?
Thanks,
Jack. (4 Replies)
Hi, I am trying to make a maths calculator that:
1. Prompts the user for a number.
2. Prompts the user for an operation (add, subtract, divide or multiply)
3. Prompts the user for a number.
4. Prompts the user for another operation (same as above) OR the option to get the result for the... (4 Replies)
Hi All,
My server is at maintanace mode and i dont have root password. how can i go back to SC prompt from here. Ctrl+d is not working to bypass the activity.
Root password for system maintenance (control-d to bypass):
Login incorrect
Root password for system maintenance (control-d to bypass): (7 Replies)
Hello AIX experts,
I have 7038-6M2 server, its operating system is AIX 5.2, and its firmware is 3K041021
After some searching on net, I tried to update its firmware level to 3K080425, so I downloaded the required rpm, and followed the steps.
After rebooting the server, it stopped and an error... (6 Replies)
Hi
I tried to boot as single-user mode on my sunfire t1000 to change my root password since the guy has left the company without give us the root password.
anyhow since this machine not have attached with cd/dvd/usb so the only think that to do it through Jumpstart
now i tried to... (8 Replies)
Hi Team,
I need password prompt between this script .i want to need put password manually. Instead of adding password in script .
Script pause till input password and resume again.
#!/usr/bin/expect
set ip
spawn telnet $ip
expect "login:"
send "USR\r"
expect "*assword*"... (3 Replies)
Hello,
I need help booting to a command prompt. The server runs SCO Openserver 5.0, with a point of sale program that automatically boots upon startup. I can't gain root access, and the administrator password for the point of sale program is un-obtainable. I am upgrading to a new point of sale... (8 Replies)
Hi
Does someone have the latest firmware for a sunfire v880
I have a problem with the FC-AL disk i guess i need to upgrade the firmware but i dont have a support with oracle and i can't find it anywhere
thank you (4 Replies)
Hi,
I have installed the HMC on the VMWare VM. I try to add the power machine (managed system) and asking for a password? So this is the IBM predefined password of Power Machine?
In the VMWare perspective, we can login to ESX host to do some management tasks. But how about the Power machine?... (6 Replies)