Login or Register to Ask a Question and Join Our Community


Solaris

Telnet uninitialized

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Telnet uninitialized
# 1  
Old 05-28-2013
Telnet uninitialized
HI

I need help regarding telnet as I try to run the service it gives error

Code:
#svcs -xv svc:/network/telnet:default
svc:/network/telnet:default (Telnet server)
 State: uninitialized since Wed May 15 16:46:41 2013
Reason: Restarter svc:/network/inetd:default is not running.
   See: http://sun.com/msg/SMF-8000-5H
   See: man -M /usr/share/man -s 1M in.telnetd
   See: man -M /usr/share/man -s 1M telnetd
Impact: This service is not running.

I have tried to disable and then enable but I am unable to telnet the server from outside network. telnet service is uninitialized.

Code:
uninitialized svc:/network/telnet:default

Need help i.e how to initialized and run telnet and ftp service in Solaris 10.

Regards
Last edited by Scott; 05-28-2013 at 03:00 AM.. Reason: Code tags
# 2  
Old 05-28-2013
What says
Code:
svcs -xv svc:/network/inetd:default

?
# 3  
Old 05-28-2013
Code:
svcs -xv svc:/network/inetd:default
svc:/network/inetd:default (inetd)
 State: offline since Wed May 15 16:46:40 2013
Reason: Service svc:/system/filesystem/local:default
        is not running because a method failed.
   See: http://sun.com/msg/SMF-8000-GE
  Path: svc:/network/inetd:default
          svc:/system/filesystem/local:default
   See: man -M /usr/share/man -s 1M inetd
Impact: 6 dependent services are not running:
        svc:/milestone/multi-user:default
        svc:/milestone/multi-user-server:default
        svc:/system/basicreg:default
        svc:/system/zones:default
        svc:/application/graphical-login/cde-login:default
        svc:/application/cde-printinfo:default

---------- Post updated at 11:41 AM ---------- Previous update was at 10:46 AM ----------

Code:
svcs -xv

svc:/system/filesystem/local:default (local file system mounts)
 State: maintenance since Wed May 15 16:50:55 2013
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
   See: http://sun.com/msg/SMF-8000-KS
   See: /var/svc/log/system-filesystem-local:default.log
Impact: 38 dependent services are not running:
        svc:/system/webconsole:console
        svc:/system/filesystem/autofs:default
        svc:/system/system-log:default
        svc:/application/management/seaport:default
        svc:/application/management/snmpdx:default
        svc:/application/management/dmi:default
        svc:/milestone/multi-user-server:default
        svc:/system/basicreg:default
        svc:/system/zones:default
        svc:/application/management/sma:default
        svc:/system/fpsd:default
        svc:/milestone/multi-user:default
        svc:/application/graphical-login/cde-login:default
        svc:/application/cde-printinfo:default
        svc:/network/smtp:sendmail
        svc:/system/dumpadm:default
        svc:/system/fmd:default
        svc:/network/ssh:default
        svc:/system/sysidtool:net
        svc:/network/rpc/bind:default
        svc:/network/nfs/nlockmgr:default
        svc:/network/nfs/client:default
        svc:/network/nfs/status:default
        svc:/network/nfs/cbd:default
        svc:/network/nfs/mapid:default
        svc:/application/stosreg:default
        svc:/network/inetd:default
        svc:/system/sysidtool:system
        svc:/system/postrun:default
        svc:/system/filesystem/volfs:default
        svc:/platform/sun4u/dscp:default
        svc:/platform/sun4u/sckmd:default
        svc:/system/cron:default
        svc:/application/font/fc-cache:default
        svc:/application/gdm2-login:default
        svc:/system/boot-archive-update:default
        svc:/network/shares/group:default
        svc:/system/sac:default

svc:/network/rpc/gss:default (Generic Security Service)
 State: uninitialized since Wed May 15 16:46:40 2013
Reason: Restarter svc:/network/inetd:default is not running.
   See: http://sun.com/msg/SMF-8000-5H
   See: man -M /usr/share/man -s 1M gssd
Impact: 19 dependent services are not running:
        svc:/network/nfs/client:default
        svc:/system/filesystem/autofs:default
        svc:/system/webconsole:console
        svc:/system/system-log:default
        svc:/application/management/seaport:default
        svc:/application/management/snmpdx:default
        svc:/application/management/dmi:default
        svc:/milestone/multi-user-server:default
        svc:/system/basicreg:default
        svc:/system/zones:default
        svc:/application/management/sma:default
        svc:/system/fpsd:default
        svc:/milestone/multi-user:default
        svc:/application/graphical-login/cde-login:default
        svc:/application/cde-printinfo:default
        svc:/network/smtp:sendmail
        svc:/system/dumpadm:default
        svc:/system/fmd:default
        svc:/network/ssh:default

svc:/network/rpc/meta:default (SVM remote metaset services)
 State: uninitialized since Wed May 15 16:46:40 2013
Reason: Restarter svc:/network/inetd:default is not running.
   See: http://sun.com/msg/SMF-8000-5H
   See: man -M /usr/share/man -s 1M rpc.metad
Impact: 7 dependent services are not running:
        svc:/system/mdmonitor:default
        svc:/milestone/multi-user:default
        svc:/milestone/multi-user-server:default
        svc:/system/basicreg:default
        svc:/system/zones:default
        svc:/application/graphical-login/cde-login:default
        svc:/application/cde-printinfo:default

svc:/network/rpc/rstat:default (kernel statistics server)
 State: uninitialized since Wed May 15 16:46:41 2013
Reason: Restarter svc:/network/inetd:default is not running.
   See: http://sun.com/msg/SMF-8000-5H
   See: man -M /usr/share/man -s 1M rpc.rstatd
   See: man -M /usr/share/man -s 1M rstatd
Impact: 1 dependent service is not running:
        svc:/application/management/sma:default

svc:/network/rpc/smserver:default (removable media management)
 State: uninitialized since Wed May 15 16:46:41 2013
Reason: Restarter svc:/network/inetd:default is not running.
   See: http://sun.com/msg/SMF-8000-5H
   See: man -M /usr/share/man -s 1M rpc.smserverd
Impact: 1 dependent service is not running:
        svc:/system/filesystem/volfs:default

svc:/platform/sun4u/dcs:default (domain configuration server)
 State: maintenance since Wed May 15 16:50:55 2013
Reason: Restarting too quickly.
   See: http://sun.com/msg/SMF-8000-L5
   See: man -M /usr/share/man -s 1M dcs
   See: /var/svc/log/platform-sun4u-dcs:default.log
Impact: This service is not running.

Last edited by Scott; 05-28-2013 at 06:10 AM.. Reason: Code tags, please...
# 4  
Old 05-28-2013
The root cause is likely something wrong with a file system. Have a look to:

Code:
/var/svc/log/system-filesystem-local:default.log

# 5  
Old 05-28-2013
these are last msgs error is since 15th of may

Code:
[ Mar 27 03:16:41 Executing start method ("/lib/svc/method/fs-local") ]
[ Mar 27 03:16:42 Method "start" exited with status 0 ]
[ Mar 27 08:10:20 Executing start method ("/lib/svc/method/fs-local") ]
[ Mar 27 08:10:21 Method "start" exited with status 0 ]
[ Mar 27 08:57:54 Executing start method ("/lib/svc/method/fs-local") ]
[ Mar 27 08:57:56 Method "start" exited with status 0 ]
[ Apr 23 23:29:59 Stopping because service disabled. ]
[ Apr 23 23:29:59 Executing stop method (null) ]
[ Apr 23 23:33:38 Executing start method ("/lib/svc/method/fs-local") ]
[ Apr 23 23:33:44 Method "start" exited with status 0 ]
[ Apr 23 23:45:39 Stopping because service disabled. ]
[ Apr 23 23:45:39 Executing stop method (null) ]
[ Apr 23 23:48:50 Executing start method ("/lib/svc/method/fs-local") ]
[ Apr 23 23:48:56 Method "start" exited with status 0 ]
[ Apr 10 00:26:14 Executing start method ("/lib/svc/method/fs-local") ]
/dev/rdsk/c1t600000E00D0000000001366400010000d0s6: No such file or directory
/dev/rdsk/c1t600000E00D0000000001366400000000d0s6: No such file or directory
mount: /dev/dsk/c1t600000E00D0000000001366400010000d0s6 or /datafile/u01, no suc
h file or directory
mount: /dev/dsk/c1t600000E00D0000000001366400000000d0s6 or /datafile/u02, no suc
h file or directory
WARNING: /sbin/mountall -l failed: exit status 1
[ May 15 16:50:55 Method "start" exited with status 95 ]

another thing which i noted in /etc/inetd.conf there is no telnet ..see this file below

Code:
#ident  "@(#)inetd.conf 1.56    04/10/21 SMI"
#
# Legacy configuration file for inetd(1M).  See inetd.conf(4).
#
# This file is no longer directly used to configure inetd.
# The Solaris services which were formerly configured using this file
# are now configured in the Service Management Facility (see smf(5))
# using inetadm(1M).
#
# Any records remaining in this file after installation or upgrade,
# or later created by installing additional software, must be converted
# to smf(5) services and imported into the smf repository using
# inetconv(1M), otherwise the service will not be available.  Once
# a service has been converted using inetconv, further changes made to
# its entry here are not reflected in the service.
#
#
# CacheFS daemon.  Provided only as a basis for conversion by inetconv(1M).
#
100235/1 tli rpc/ticotsord wait root /usr/lib/fs/cachefs/cachefsd cachefsd
# TFTPD - tftp server (primarily used for booting)
#tftp   d
gram   udp6    wait    root    /usr/sbin/in.tftpd      in.tftpd -s /tft
pboot

should i add and what would be exact entry
Last edited by Scott; 07-29-2013 at 09:43 AM.. Reason: Code tags
# 6  
Old 05-28-2013
Quote:
Originally Posted by smazshah
/dev/rdsk/c1t600000E00D0000000001366400010000d0s6: No such file or directory
any idea?
what could be reason??
You are missing a device, likely from a SAN LUN.
Quote:
should i add and what would be exact entry
You don't need to modify this file.
# 7  
Old 05-28-2013
what's the affect..?
as File system in /etc/vfstab has enteries which are not in df output so this reaason...

but why its like that?

---------- Post updated at 02:35 PM ---------- Previous update was at 02:17 PM ----------
Code:
bash-3.00# df -h
Filesystem             size   used  avail capacity  Mounted on
/dev/md/dsk/d1          20G   6.1G    13G    32%    /
/devices                 0K     0K     0K     0%    /devices
ctfs                     0K     0K     0K     0%    /system/contract
proc                     0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
swap                    47G   1.5M    47G     1%    /etc/svc/volatile
objfs                    0K     0K     0K     0%    /system/object
sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
fd                       0K     0K     0K     0%    /dev/fd
/dev/md/dsk/d3          15G   527M    14G     4%    /var
swap                    47G     0K    47G     0%    /tmp
swap                    47G    16K    47G     1%    /var/run
/dev/md/dsk/d4          15G   440M    14G     3%    /opt
/dev/md/dsk/d5          65G    34G    31G    53%    /export/home

Code:
bash-3.00# more /etc/vfstab
#device         device          mount           FS      fsck    mount   mount
#to mount       to fsck         point           type    pass    at boot options
#
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d2  -       -       swap    -       no      -
/dev/md/dsk/d1  /dev/md/rdsk/d1 /       ufs     1       no      -
/dev/md/dsk/d3  /dev/md/rdsk/d3 /var    ufs     1       no      -
/dev/md/dsk/d5  /dev/md/rdsk/d5 /export/home    ufs     2       yes     -
/dev/dsk/c1t600000E00D0000000001366400010000d0s6        /dev/rdsk/c1t600000E00D0
000000001366400010000d0s6       /datafile/u01   ufs     2       yes     forcedir
ectio
/dev/dsk/c1t600000E00D0000000001366400000000d0s6        /dev/rdsk/c1t600000E00D0
000000001366400000000d0s6       /datafile/u02   ufs     2       yes     forcedir
ectio
/dev/md/dsk/d4  /dev/md/rdsk/d4 /opt    ufs     2       yes     -
/devices        -       /devices        devfs   -       no      -
sharefs -       /etc/dfs/sharetab       sharefs -       no      -
ctfs    -       /system/contract        ctfs    -       no      -
objfs   -       /system/object  objfs   -       no      -
swap    -       /tmp    tmpfs   -       yes     -
/export/home/swapfile   -       -       swap    -       no      -

there are two file system from storage which are not mounted i need to know does it affect telnet and what's the reason?
Last edited by Scott; 07-29-2013 at 09:43 AM.. Reason: Code tags
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Lot of services in non-global zones, in uninitialized after reboot

Hello, This is Solaris-10 server, running with 4 non-global zones. This server was hung today and I had to reboot it forcefully from console. Then root file-system was not clean and I had to run fsck from failsafe mode. After it came back in run-level-3, lot of services are showing in... (3 Replies)
Discussion started by: solaris_1977
3 Replies

2. Shell Programming and Scripting

PERL - Use of uninitialized value in pattern match (m//)

I have written a PERL script to read files from directory that the filename contains OT. It then takes each line of each file and prints the first 5 characters before the first occurence of a /. Currently I am getting the error: Use of uninitialized value in string at rowGrab.pl line 43.... (3 Replies)
Discussion started by: chris01010
3 Replies

3. UNIX for Dummies Questions & Answers

Difference Between Krb5-telnet And Ekrb5-telnet

Hi, I want to know the difference between these two services. Both are under xinetd. Both are used for enabling and disabling Telnet service. So, can somebody please explain me the difference between the two ? Thanks in advance :) (0 Replies)
Discussion started by: kashifsd17
0 Replies

4. UNIX for Dummies Questions & Answers

Automatically login in the telnet from present telnet

Hi, I was writing one script which includes to switch to the another telnet automatically from the present telnet server. I was using rlogin but firstly it takes the same user name of the present telnet and secondly it is prompting for the password. But i want to switch to the another telnet... (2 Replies)
Discussion started by: Prateek
2 Replies

5. Shell Programming and Scripting

"Use of uninitialized value" in perl

Hi Guys, I am trying to run a Perl code which reads the csv file and has to write certain fields to another file . I see the following when trying to execute the script Use of uninitialized value in string eq at ./file.pl line 19, <> line 13. Use of uninitialized value in concatenation (.)... (4 Replies)
Discussion started by: stunnerz_84
4 Replies

6. Shell Programming and Scripting

use of uninitialized value in subtraction

Hallo all i am trying to execute this script ............... But this is throwing the error...... use of uninitialized value in subtraction in at icd_convert.pl line 156 use of uninitialized value in subtraction in at icd_convert.pl line 157 use of uninitialized value in subtraction in at... (1 Reply)
Discussion started by: suvenduperl
1 Replies

7. Solaris

How to clear STATE - uninitialized in solaris 10

Helloo Frd's, How to clear uninitialized state in solaris 10 Services, the fallowing inetadm shows on my server. I tried svcadm clear, enable... not worked. And also i can't change to enable some of service on that. sara4@root# inetadm ENABLED STATE FMRI disabled ... (6 Replies)
Discussion started by: madhu548
6 Replies

8. Shell Programming and Scripting

Webpage to Telnet via Perl and Expect: Telnet problem?

Somewhat long story: I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage. This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only... (1 Reply)
Discussion started by: jondo
1 Replies

9. Shell Programming and Scripting

Use of uninitialized value in join or string at arraydef.pl

When try to execute the following script, its throwing this error: " Use of uninitialized value in join or string at arraydef.pl line 17. " The script is : 1 #!/usr/bin/perl 2 3 use strict; 4 5 my @a = ( 1...10 ); 6 7 print " Original array : @a... (5 Replies)
Discussion started by: praveen_b744
5 Replies

10. Programming

bss(uninitialized data) segment allocation

Hi 1) Please go through the following code : char string2; char string1; main() { memcpy(string2,"SENDER ",12); strcpy(string1,"******"); printf("%s\n%s\n",string1,string2); } 2) and the output of... (7 Replies)
Discussion started by: karimulla_sha
7 Replies
Login or Register to Ask a Question