FILE(1) BSD General Commands Manual FILE(1)
NAME
file -- determine file type
SYNOPSIS
file [-bcdDhiIkLnNprsvz] [--extension] [--mime-encoding] [--mime-type] [-f namefile] [-m magicfiles] [-P name=value] [-M magicfiles] file
file -C [-m magicfiles]
file [--help]
DESCRIPTION
This manual page documents version 5.04 of the file command.
file tests each argument in an attempt to classify it. There are three sets of tests, performed in this order: filesystem tests, magic
tests, and language tests. The first test that succeeds causes the file type to be printed.
The type printed will usually contain one of the words text (the file contains only printing characters and a few common control characters
and is probably safe to read on an ASCII terminal), executable (the file contains the result of compiling a program in a form understandable
to some UNIX kernel or another), or data meaning anything else (data is usually ``binary'' or non-printable). Exceptions are well-known file
formats (core files, tar archives) that are known to contain binary data. When modifying magic files or the program itself, make sure to
preserve these keywords. Users depend on knowing that all the readable files in a directory have the word ``text'' printed. Don't do as
Berkeley did and change ``shell commands text'' to ``shell script''.
The filesystem tests are based on examining the return from a stat(2) system call. The program checks to see if the file is empty, or if
it's some sort of special file. Any known file types appropriate to the system you are running on (sockets, symbolic links, or named pipes
(FIFOs) on those systems that implement them) are intuited if they are defined in the system header file <sys/stat.h>.
The magic tests are used to check for files with data in particular fixed formats. The canonical example of this is a binary executable
(compiled program) a.out file, whose format is defined in <elf.h>, <a.out.h> and possibly <exec.h> in the standard include directory. These
files have a ``magic number'' stored in a particular place near the beginning of the file that tells the UNIX operating system that the file
is a binary executable, and which of several types thereof. The concept of a ``magic'' has been applied by extension to data files. Any
file with some invariant identifier at a small fixed offset into the file can usually be described in this way. The information identifying
these files is read from the compiled magic file /usr/share/file/magic.mgc, or the files in the directory /usr/share/file/magic if the com-
piled file does not exist.
If a file does not match any of the entries in the magic file, it is examined to see if it seems to be a text file. ASCII, ISO-8859-x, non-
ISO 8-bit extended-ASCII character sets (such as those used on Macintosh and IBM PC systems), UTF-8-encoded Unicode, UTF-16-encoded Unicode,
and EBCDIC character sets can be distinguished by the different ranges and sequences of bytes that constitute printable text in each set. If
a file passes any of these tests, its character set is reported. ASCII, ISO-8859-x, UTF-8, and extended-ASCII files are identified as
``text'' because they will be mostly readable on nearly any terminal; UTF-16 and EBCDIC are only ``character data'' because, while they con-
tain text, it is text that will require translation before it can be read. In addition, file will attempt to determine other characteristics
of text-type files. If the lines of a file are terminated by CR, CRLF, or NEL, instead of the Unix-standard LF, this will be reported.
Files that contain embedded escape sequences or overstriking will also be identified.
Once file has determined the character set used in a text-type file, it will attempt to determine in what language the file is written. The
language tests look for particular strings (cf. <names.h>) that can appear anywhere in the first few blocks of a file. For example, the
keyword .br indicates that the file is most likely a troff(1) input file, just as the keyword struct indicates a C program. These tests are
less reliable than the previous two groups, so they are performed last. The language test routines also test for some miscellany (such as
tar(1) archives).
Any file that cannot be identified as having been written in any of the character sets listed above is simply said to be ``data''.
OPTIONS
--apple
Causes the file command to output the file type and creator code as used by older MacOS versions. The code consists of eight letters,
the first describing the file type, the latter the creator.
-b, --brief
Do not prepend filenames to output lines (brief mode).
-C, --compile
Write a magic.mgc output file that contains a pre-parsed version of the magic file or directory.
-c, --checking-printout
Cause a checking printout of the parsed form of the magic file. This is usually used in conjunction with the -m flag to debug a new
magic file before installing it.
-C, --compile
Write a magic.mgc output file that contains a pre-parsed version of the magic file or directory.
-d Apply the default system tests; this is the default behavior unless -M is specified.
-D Print debugging messages.
-E On filesystem errors (file not found etc), instead of handling the error as regular output as POSIX mandates and keep going, issue an
error message and exit.
-e, --exclude testname
Exclude the test named in testname from the list of tests made to determine the file type. Valid test names are:
apptype EMX application type (only on EMX).
ascii Various types of text files (this test will try to guess the text encoding, irrespective of the setting of the 'encoding'
option).
encoding Different text encodings for soft magic tests.
tokens Ignored for backwards compatibility.
cdf Prints details of Compound Document Files.
compress Checks for, and looks inside, compressed files.
elf Prints ELF file details, provided soft magic tests are enabled and the elf magic is found.
soft Consults magic files.
tar Examines tar files.
--extension
Print a slash-separated list of valid extensions for the file type found.
-F, --separator separator
Use the specified string as the separator between the filename and the file result returned. Defaults to ':'.
-f, --files-from namefile
Read the names of the files to be examined from namefile (one per line) before the argument list. Either namefile or at least one
filename argument must be present; to test the standard input, use '-' as a filename argument. Please note that namefile is
unwrapped and the enclosed filenames are processed when this option is encountered and before any further options processing is done.
This allows one to process multiple lists of files with different command line arguments on the same file invocation. Thus if you
want to set the delimiter, you need to do it before you specify the list of files, like: ``-F @ -f namefile'', instead of: ``-f
namefile -F @''.
-h, --no-dereference
option causes symlinks not to be followed (on systems that support symbolic links).
-i If the file is a regular file, do not classify its contents.
-I, --mime
Causes the file command to output mime type strings rather than the more traditional human readable ones. Thus it may say
'text/plain; charset=us-ascii' rather than ``ASCII text''.
--mime-type, --mime-encoding
Like -I, but print only the specified element(s).
-k, --keep-going
Don't stop at the first match, keep going. Subsequent matches will be have the string ' 12- ' prepended. (If you want a newline,
see the -r option.) The magic pattern with the highest strength (see the -l option) comes first.
-l, --list
Shows a list of patterns and their strength sorted descending by magic(4) strength which is used for the matching (see also the -k
option).
-L, --dereference
option causes symlinks to be followed, as the like-named option in ls(1) (on systems that support symbolic links). This is the
default behavior.
-m, --magic-file list
Specify an alternate list of files and directories containing magic. This can be a single item, or a colon-separated list. If a
compiled magic file is found alongside a file or directory, it will be used instead.
-M list
Like -m, except that the default rules are not applied unless -d is specified.
-n, --no-buffer
Force stdout to be flushed after checking each file. This is only useful if checking a list of files. It is intended to be used by
programs that want filetype output from a pipe.
-p, --preserve-date
On systems that support utime(3) or utimes(2), attempt to preserve the access time of files analyzed, to pretend that file never read
them.
-P, --parameter name=value
Set various parameter limits.
Name Default Explanation
indir 15 recursion limit for indirect magic
name 30 use count limit for name/use magic
elf_notes 256 max ELF notes processed
elf_phnum 128 max ELF program sections processed
elf_shnum 32768 max ELF sections processed
regex 8192 length limit for regex searches
-r, --raw
No operation, included for historical compatibility.
-s, --special-files
Normally, file only attempts to read and determine the type of argument files which stat(2) reports are ordinary files. This pre-
vents problems, because reading special files may have peculiar consequences. Specifying the -s option causes file to also read
argument files which are block or character special files. This is useful for determining the filesystem types of the data in raw
disk partitions, which are block special files. This option also causes file to disregard the file size as reported by stat(2) since
on some systems it reports a zero size for raw disk partitions.
-v, --version
Print the version of the program and exit.
-z, --uncompress
Try to look inside compressed files.
-Z, --uncompress-noreport
Try to look inside compressed files, but report information about the contents only not the compression.
-0, --print0
Output a null character ' ' after the end of the filename. Nice to cut(1) the output. This does not affect the separator, which is
still printed.
--help Print a help message and exit.
FILES
/usr/share/file/magic.mgc Default compiled list of magic.
/usr/share/file/magic Directory containing default magic files.
ENVIRONMENT
The environment variable MAGIC can be used to set the default magic file name. file adds ``.mgc'' to the value of this variable as appropri-
ate. However, file has to exist in order for file.mime to be considered.
LEGACY DESCRIPTION
In legacy mode, the -D, -I, and -M options do not exist.
The -d, -i, and -r options behave differently. The -d option provides debugging information (same as -D in conformance mode). The -i option
displays mime type information (same as -I in conformance mode). The -r option will disable the translation of unprintable characters (by
default, this translation is already disabled in conformance mode).
Furthermore, the -h option becomes the default symlink behavior (don't follow symlinks) unless POSIXLY_CORRECT is set.
For more information about legacy mode, see compat(5).
SEE ALSO
hexdump(1), od(1), strings(1), magic(5), otool(1), compat(5)
STANDARDS CONFORMANCE
This program conforms to Version 3 of the Single UNIX Specification (``SUSv3''). Its behavior is mostly compatible with the System V program
of the same name. This version knows more magic, however, so it will produce different (albeit more accurate) output in many cases.
The one significant difference between this version and System V is that this version treats any white space as a delimiter, so that spaces
in pattern strings must be escaped. For example,
>10 string language impress (imPRESS data)
in an existing magic file would have to be changed to
>10 string language impress (imPRESS data)
In addition, in this version, if a pattern string contains a backslash, it must be escaped. For example
0 string egindata Andrew Toolkit document
in an existing magic file would have to be changed to
0 string \begindata Andrew Toolkit document
SunOS releases 3.2 and later from Sun Microsystems include a file command derived from the System V one, but with some extensions. This ver-
sion differs from Sun's only in minor ways. It includes the extension of the '&' operator, used as, for example,
>16 long&0x7fffffff >0 not stripped
MAGIC DIRECTORY
The magic file entries have been collected from various sources, mainly USENET, and contributed by various authors. Christos Zoulas (address
below) will collect additional or corrected magic file entries. A consolidation of magic file entries will be distributed periodically.
The order of entries in the magic file is significant. Depending on what system you are using, the order that they are put together may be
incorrect. If your old file command uses a magic file, keep the old magic file around for comparison purposes (rename it to
/usr/share/file/magic.orig).
EXAMPLES
$ file file.c file /dev/{wd0a,hda}
file.c: C program text
file: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV),
dynamically linked (uses shared libs), stripped
/dev/wd0a: block special (0/0)
/dev/hda: block special (3/0)
$ file -s /dev/wd0{b,d}
/dev/wd0b: data
/dev/wd0d: x86 boot sector
$ file -s /dev/hda{,1,2,3,4,5,6,7,8,9,10}
/dev/hda: x86 boot sector
/dev/hda1: Linux/i386 ext2 filesystem
/dev/hda2: x86 boot sector
/dev/hda3: x86 boot sector, extended partition table
/dev/hda4: Linux/i386 ext2 filesystem
/dev/hda5: Linux/i386 swap file
/dev/hda6: Linux/i386 swap file
/dev/hda7: Linux/i386 swap file
/dev/hda8: Linux/i386 swap file
/dev/hda9: empty
/dev/hda10: empty
$ file -i file.c file /dev/{wd0a,hda}
file.c: text/x-c
file: application/x-executable
/dev/hda: application/x-not-regular-file
/dev/wd0a: application/x-not-regular-file
HISTORY
There has been a file command in every UNIX since at least Research Version 4 (man page dated November, 1973). The System V version intro-
duced one significant major change: the external list of magic types. This slowed the program down slightly but made it a lot more flexible.
This program, based on the System V version, was written by Ian Darwin <ian@darwinsys.com> without looking at anybody else's source code.
John Gilmore revised the code extensively, making it better than the first version. Geoff Collyer found several inadequacies and provided
some magic file entries. Contributions of the '&' operator by Rob McMahon, <cudcv@warwick.ac.uk>, 1989.
Guy Harris, <guy@netapp.com>, made many changes from 1993 to the present.
Primary development and maintenance from 1990 to the present by Christos Zoulas <christos@astron.com>.
Altered by Chris Lowth <chris@lowth.com>, 2000: handle the -I option to output mime type strings, using an alternative magic file and inter-
nal logic.
Altered by Eric Fischer <enf@pobox.com>, July, 2000, to identify character codes and attempt to identify the languages of non-ASCII files.
Altered by Reuben Thomas <rrt@sc3d.org>, 2007-2011, to improve MIME support, merge MIME and non-MIME magic, support directories as well as
files of magic, apply many bug fixes, update and fix a lot of magic, improve the build system, improve the documentation, and rewrite the
Python bindings in pure Python.
The list of contributors to the 'magic' directory (magic files) is too long to include here. You know who you are; thank you. Many contrib-
utors are listed in the source files.
LEGAL NOTICE
Copyright (c) Ian F. Darwin, Toronto, Canada, 1986-1999. Covered by the standard Berkeley Software Distribution copyright; see the file
COPYING in the source distribution.
The files tar.h and is_tar.c were written by John Gilmore from his public-domain tar(1) program, and are not covered by the above license.
RETURN CODE
file returns 0 on success, and non-zero on error.
BUGS
Please report bugs and send patches to the bug tracker at http://bugs.gw.com/ or the mailing list at <file@mx.gw.com> (visit
http://mx.gw.com/mailman/listinfo/file first to subscribe).
TODO
Fix output so that tests for MIME and APPLE flags are not needed all over the place, and actual output is only done in one place. This needs
a design. Suggestion: push possible outputs on to a list, then pick the last-pushed (most specific, one hopes) value at the end, or use a
default if the list is empty. This should not slow down evaluation.
The handling of MAGIC_CONTINUE and printing 12- between entries is clumsy and complicated; refactor and centralize.
Some of the encoding logic is hard-coded in encoding.c and can be moved to the magic files if we had a !:charset annotation
Continue to squash all magic bugs. See Debian BTS for a good source.
Store arbitrarily long strings, for example for %s patterns, so that they can be printed out. Fixes Debian bug #271672. This can be done by
allocating strings in a string pool, storing the string pool at the end of the magic file and converting all the string pointers to relative
offsets from the string pool.
Add syntax for relative offsets after current level (Debian bug #466037).
Make file -ki work, i.e. give multiple MIME types.
Add a zip library so we can peek inside Office2007 documents to print more details about their contents.
Add an option to print URLs for the sources of the file descriptions.
Combine script searches and add a way to map executable names to MIME types (e.g. have a magic value for !:mime which causes the resulting
string to be looked up in a table). This would avoid adding the same magic repeatedly for each new hash-bang interpreter.
When a file descriptor is available, we can skip and adjust the buffer instead of the hacky buffer management we do now.
Fix ``name'' and ``use'' to check for consistency at compile time (duplicate ``name'', ``use'' pointing to undefined ``name'' ). Make
``name'' / ``use'' more efficient by keeping a sorted list of names. Special-case ^ to flip endianness in the parser so that it does not
have to be escaped, and document it.
If the offsets specified internally in the file exceed the buffer size ( HOWMANY variable in file.h), then we don't seek to that offset, but
we give up. It would be better if buffer managements was done when the file descriptor is available so move around the file. One must be
careful though because this has performance (and thus security considerations).
AVAILABILITY
You can obtain the original author's latest version by anonymous FTP on ftp.astron.com in the directory /pub/file/file-X.YZ.tar.gz.
BSD
October 19, 2016 BSD
