ncaconfd(1m) [minix man page]
ncaconfd(1M) System Administration Commands ncaconfd(1M) NAME
ncaconfd - Solaris Network Cache and Accelerator (NCA) configuration daemon SYNOPSIS
/usr/lib/inet/ncaconfd [-al ] interface1 [interface2 ...] DESCRIPTION
Use the ncaconfd utility to set up NCA on a system. At boot time, the ncakmod initialization script reads in nca.if(4) to determine on which interface(s) NCA should run. ncaconfd then sets up the interface. ncaconfd also operates as a daemon if the nca_active key is set to enabled in ncakmod.conf(4) file. In this case, ncaconfd will continue as a daemon after all the NCA interfaces have been set up, listening for routing changes. The changes are then passed to NCA to control which interface NCA should use to make active outgoing TCP connnections. OPTIONS
The following options are supported: -a Enable active connections. -l Enable logging. FILES
/etc/nca/ncakmod.conf ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWncau | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
nca(1), ncakmod(1), nca.if(4), ncakmod.conf(4), attributes(5) SunOS 5.10 12 Oct 2004 ncaconfd(1M)
Check Out this Related Man Page
ncakmod.conf(4) File Formats ncakmod.conf(4) NAME
ncakmod.conf - the ncakmod configuration file SYNOPSIS
/etc/nca/ncakmod.conf DESCRIPTION
The ncakmod.conf file is used to configure the Solaris Network Cache and Accelerator ("NCA") kernel module. The file contains two fields, key and value. The status key is used to indicate if the user wants to have NCA turned on as a feature. If the value of status key is enabled, then the NCA kernel module will be pushed on to the specified interfaces. If the value of the status key is disabled, then the NCA kernel module will not be pushed on to any interfaces . The default is disabled. The httpd_door_path key specifies the path name of the Solaris Door RPC mechanism that will be used to communicate with the http daemon. The default value is /var/run/nca_httpd_1.door. Use the nca_active key to indicate whether to allow NCA to actively open outgoing TCP connections. The default value for nca_active is dis- abled. If set to enabled, ncaconfd sets up NCA for each interface and then operates as a daemon, allowing NCA to make outgoing TCP connec- tions. This functionality is possible only by using the doors interface to NCA. A web server that uses the sockets interface with PF_NCA or ncad_addr.so cannot connect by means of nca_active. NCA supports the logging of in-kernel cache hits. See ncalogd.conf(4). NCA stores logs in a binary format. Use the ncab2clf(1) utility to convert the log from a binary format to the Common Log File format. In order to implement changes to the ncakmod.conf file, you will need to reboot. EXAMPLES
Example 1: A Sample ncakmod.conf File The following is a sample ncakmod.conf file: # # NCA Kernel Module Configuration File # status=disabled httpd_door_path=/var/run/nca_httpd_1.door nca_active=disabled FILES
/etc/nca/ncakmod.conf The NCA kernel module configuration file. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWncar | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
nca(1), ncab2clf(1), ncakmod(1), door_create(3DOOR), nca.if(4), ncad_addr(4), ncalogd.conf(4), attributes(5) System Administration Guide: IP Services SunOS 5.10 28 Sep 2001 ncakmod.conf(4)