hpux dcecp_rpcentry man page on unix.com

rpcentry(1m) rpcentry(1m)

NAME
rpcentry - A dcecp object that manages an RPC entry in CDS

SYNOPSIS
rpcentry create entry_name_list

rpcentry delete entry_name_list

rpcentry export entry_name_list {[-object object_uuid_list] [-interface interface_id -binding string_binding_list]}

rpcentry help [operation | -verbose]

rpcentry import entry_name_list -interface interface_id [-object object_uuid] [-max integer] [-noupdate]

rpcentry operations

rpcentry show entry_name_list -interface interface_id_list [-object object_uuid_list] [-noupdate]

rpcentry unexport entry_name_list {[-object object_uuid_list] [-interface interface_id [-version versions]]}

ARGUMENTS
Specifies a list of one or more names of the target name service entry. For an entry in the local cell, you can omit the cell name and
specify only cell-relative names. The name of the rpcentry operation for which to display help information.

DESCRIPTION
The rpcentry object represents a remote procedure call (RPC) server entry in the cell name service. Use the rpcentry commands to create,
modify, display, and delete name service entries.

DATA STRUCTURES
The interface identifier of an RPC interface. The interface identifier takes the following form: interface-uuid,major-version.minor-ver-
sion The version numbers are optional, but if you omit a version number, the value defaults to 0. The UUID is a hexadecimal string and the
complete version number is a decimal string. For example: -interface ec1eeb60-5943-11c9-a309-08002b102989,3.11 Leading zeros in version
numbers are ignored.

Alternatively, you can use Tcl syntax in the following form: {interface-UUID major-version.minor-version} For example: -interface
{458ffcbe-98c1-11cd-bd93-0000c08adf56 1.0}

An RPC string binding that describes a server's location. The value has the form of an RPC string binding, without an object UUID. The
binding information contains an RPC protocol, a network address, and (sometimes) an endpoint within [] (square brackets) as follows: rpc-
prot-seq:network-addr[endpoint] For a well-known endpoint, include the endpoint in the string binding surrounded by brackets. You may need
to use the (backslash) to escape the brackets as shown in the following example. Otherwise dcecp interprets the brackets as enclosing
another command. -binding ncadg_ip_udp:63.0.2.17[5347]

For a dynamic endpoint, omit the endpoint from the string binding, for example: -binding ncacn_ip_tcp:16.20.15.25

Alternatively, you can use Tcl syntax. For example: -binding {ncacn_ip_tcp 130.105.1.227 1072} The UUID of an object. The UUID is a hexa-
decimal string, for example: -object 3c6b8f60-5945-11c9-a236-08002b102989

Alternatively, you can use Tcl syntax. For example: -object {3c6b8f60-5945-11c9-a236-08002b102989} Specifies which interface version num-
bers should be returned by a show operation. Specify versions by using one of the following values for the -version option: The interface
version is ignored. Both the major and minor versions must match the specified versions. The major version must match the specified ver-
sion, and the minor version must be greater than or equal to the specified version. The major version must match the specified version;
the minor version is ignored. The major version must be less than or equal to that specified. If the major versions are equal, the minor
version must be less than or equal to that specified.

If the -version option is absent, the command shows compatible version numbers.

OPERATIONS
rpcentry create
Creates an empty entry in the name service. The syntax is as follows: rpcentry create entry_name_list

The create operation creates an empty entry in the name service. Since an empty entry is the same as an empty RPC group or RPC profile,
calling rpcentry create is the same as calling rpcgroup create or rpcprofile create. The entry_name_list argument is a list of names of
RPC entries to be created. If the RPC entry already exists, an error message is returned. This operation returns on empty string on suc-
cess.

Privileges Required

You need i (insert) permission to the parent directory and both r (read) permission and w (write) permission to the Cell Directory Service
(CDS) object entry (the target name service entry).

Examples

The following command adds an unspecialized entry to the name service database: dcecp> rpcentry create /.:/LandS/anthro/Cal_host_2 dcecp>

rpcentry delete
Removes the specified entry from the name service. The syntax is as follows: rpcentry delete entry_name_list

The delete operation removes the specified entry from the name service. The entry_name_list argument is a list of one or more names of RPC
entries to be deleted. This operation returns an empty string on success. If the entry does not exist, an error is returned.

Privileges Required

You need r (read) permission to the CDS object entry (the target name service entry). You also need d (delete) permission to the CDS
object entry or to the parent directory.

Examples

The following command removes the entry /.:/LandS/anthro/Cal_host_2 from the local cell of the name service database: dcecp> rpcentry
delete /.:/LandS/anthro/Cal_host_2 dcecp>

rpcentry export
Transfers information to the specified entry in the name service. The syntax is as follows: rpcentry export entry_name_list {[-object
object_uuid_list] [-interface interface_id -binding string_binding_list]}

Options Declares the UUID of an object. Accepts a list of up to 32 object UUIDs. The UUID is a hexadecimal string.

See DATA STRUCTURES for the format of an object UUID. Declares the interface identifier of a single RPC interface. If you specify an
interface identifier, you must specify at least one -binding option.

See DATA STRUCTURES for the format of an interface identifier. Declares a list of one or more string bindings. To use this option, you
must also use the -interface option to specify an interface identifier.

See DATA STRUCTURES for the format of a string binding.

The export operation transfers information to the specified entry in the name service. The entry_name_list argument is a list of one or
more names of RPC entries to be exported to. If an entry does not exist, it is created. Uses the -interface, -binding, and -object
options to specify what to export. This operation returns an empty string on success.

Privileges Required

You need both r (read) permission and w (write) permission to the CDS object entry (the target name service entry). If the entry does not
exist, you also need i (insert) permission to the parent directory.

Examples

The following example uses Tcl syntax to export an RPC entry to CDS: dcecp> rpcentry export /.:/subsys/applications/bbs_server > -inter-
face {458ffcbe-98c1-11cd-bd93-0000c08adf56 1.0} > -binding {ncacn_ip_tcp 130.105.1.227} > -object
{76030c42-98d5-11cd-88bc-0000c08adf56} dcecp>

rpcentry help
Returns help information about the rpcentry object and its operations. The syntax is as follows: rpcentry help [operation | -verbose]

Options

Displays information about the rpcentry object.

Used without an argument or option, the rpcentry help command returns brief information about each rpcentry operation. The optional opera-
tion argument is the name of an operation about which you want detailed information. Alternatively, you can use the -verbose option for
more detailed information about the rpcentry object itself.

Privileges Required

No special privileges are needed to use the rpcentry help command.

Examples

dcecp> rpcentry help create Creates a list of empty RPC entries. delete Deletes a list of RPC entries. export
Stores bindings in a list of RPC entries. import Returns the bindings from a list of RPC entries. show
Returns the attributes of a list of RPC entries. unexport Deletes bindings from a list of RPC entries. help
Prints a summary of command-line options. operations Returns a list of the valid operations for this command. dcecp>

rpcentry import
Returns a string binding from the specified RPC entry. The syntax is as follows: rpcentry import entry_name_list -interface interface_id
[-object object_uuid] [-max integer] [-noupdate]

Options

Declares the interface identifier of a single RPC interface.

See DATA STRUCTURES for the format of an interface identifier. Declares the UUID of an object. The UUID is a hexadecimal string.

See DATA STRUCTURES for the format of an object UUID. Specifies the maximum number of string bindings to return. A value greater than one
returns a list containing up to the number of bindings specified by the value. Normally, name service data is cached locally on each
machine in a cell. If a name service inquiry can be satisfied by data in the local CDS cache, this cached data is returned. However,
locally cached copies of name service data might not include a recent CDS update. If the -noupdate option is not specified, dcecp goes to
a CDS server to retrieve the required data, updating the local CDS cache. Use the -noupdate option to avoid taking the time to update the
local cache when you have reason to believe that the local cache is up to date.

The import operation returns a string binding from the specified RPC entry. The entry_name_list argument is a list of names of RPC entries
(not a list of RPC entries) to import from. The order of returned bindings is arbitrary.

Privileges Required

You need r (read) permission to the specified CDS object entry (the starting name service entry) and to any CDS object entry in the result-
ing search path.

Examples

The following command imports a binding: dcecp> rpcentry import /.:/LandS/anthro/Cal_host_3 > -interface
{ec1eeb60-5943-11c9-a309-08002b102989 1.1} > -object 30dbeea0-fb6c-11c9-8eea-08002b0f4528 {ncacn_ip_tcp 130.105.1.227} dcecp>

rpcentry operations
Returns a list of the operations supported by the rpcentry object. The syntax is as follows: rpcentry operations

The list of available operations is in alphabetical order except for help and operations, which are listed last.

Privileges Required

No special privileges are needed to use the rpcentry operations command.

Examples

dcecp> rpcentry operations create delete export import show unexport help operations dcecp>

rpcentry show
Returns a list containing the binding information in the specified RPC entries. The syntax is as follows: rpcentry show entry_name_list
-interface interface_id_list [-object object_uuid_list] [-noupdate]

Options

Declares a list of one or more interface identifiers of RPC interfaces.

See DATA STRUCTURES for the format of an interface identifier. Declares the UUID of an object. Accepts a list of up to 32 object UUIDs.
The UUID is a hexadecimal string.

See DATA STRUCTURES for the format of an object UUID. Normally, name service data is cached locally on each machine in a cell. If a name
service inquiry can be satisfied by data in the local CDS cache, this cached data is returned. However, locally cached copies of name ser-
vice data might not include a recent CDS update. If the -noupdate option is not specified, dcecp goes to a CDS server to retrieve the
required data, updating the local CDS cache. Use the -noupdate option to avoid taking the time to update the local cache when you have
reason to believe that the local cache is up to date.

The show operation returns a list containing the binding information in the specified RPC entry. The entry_name_list argument is a list of
one or more names of RPC entries to return information about.

The returned list consists of two lists. Each item in the first list is also a list, the first two elements of which are the interface
identifier (the UUID and then the version), and the remaining are string bindings in Tcl syntax. The second list is a list of object UUIDs
exported by the server. The order of the data returned is arbitrary.

Privileges Required

You need r (read) permission to the CDS object entry (the target name service entry).

Examples

The following command uses Tcl syntax to show a name service entry: dcecp> rpcentry show /.:/subsys/applications/bbs_server
{458ffcbe-98c1-11cd-bd93-0000c08adf56 1.0
{ncacn_ip_tcp 130.105.1.227}} {76030c42-98d5-11cd-88bc-0000c08adf56} dcecp>

The following command operates from the system prompt to show a name service entry: % dcecp -c rpcentry show /.:/subsys/applica-
tions/bbs_server {458ffcbe-98c1-11cd-bd93-0000c08adf56 1.0
{ncacn_ip_tcp 130.105.1.227}} {76030c42-98d5-11cd-88bc-0000c08adf56} %

rpcentry unexport
Removes binding information from an entry in the name service. The syntax is as follows: rpcentry unexport entry_name_list {[-object
object_uuid_list] [-interface interface_id [-version versions]]}

Options

Declares the UUID of an object. Accepts a list of up to 32 object UUIDs. The UUID is a hexadecimal string.

See DATA STRUCTURES for the format of an object UUID. Declares the interface identifier of an RPC interface. Only a single interface_id
can be specified.

See DATA STRUCTURES for the format of an interface identifier. Specifies interface version numbers to be returned with the unexport opera-
tion.

See DATA STRUCTURES for the exact behavior and format of the version values.

The unexport operation removes binding information from an entry in the name service. The entry_name_list argument is a list of one or
more entry names from which binding information is to be removed. This operation returns an empty string on success.

Privileges Required

You need d (delete) permission on the parent directory and r (read) permission and w (write) permission on the CDS object entry (the target
name service entry).

Examples

The following example uses Tcl syntax to unexport the binding information for an interface. The third command entered (rpcentry show)
shows the RPC entry after the unexport operation; the object UUID remains in the entry. dcecp> rpcentry show /.:/subsys/applica-
tions/bbs_server {458ffcbe-98c1-11cd-bd93-0000c08adf56 1.0
{ncacn_ip_tcp 130.105.1.227}} {76030c42-98d5-11cd-88bc-0000c08adf56} dcecp>

dcecp> rpcentry unexport /.:/subsys/applications/bbs_server > -interface {458ffcbe-98c1-11cd-bd93-0000c08adf56 1.0} dcecp>

dcecp> rpcentry show /.:/subsys/applications/bbs_server {76030c42-98d5-11cd-88bc-0000c08adf56} dcecp>

RELATED INFORMATION
Commands: dcecp(1m), dcecp_endpoint(1m), dcecp_rpcgroup(1m), dcecp_rpcprofile(1m).

rpcentry(1m)

hpux man page for dcecp_rpcentry