Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

jackd(1) [hpux man page]

JACKD(1)																  JACKD(1)

NAME
jackd - JACK Audio Connection Kit sound server SYNOPSIS
jackd [options] -d backend [backend-parameters] jackd --help DESCRIPTION
jackd is the JACK audio server daemon, a low-latency audio server. Originally written for the GNU/Linux operating system, it also supports Mac OS X and various Unix platforms. JACK can connect a number of different client applications to an audio device and also to each other. Most clients are external, running in their own processes as normal applications. JACK also supports internal clients, which run within the jackd process using a loadable "plugin" interface. JACK differs from other audio servers in being designed from the ground up for professional audio work. It focuses on two key areas: syn- chronous execution of all clients, and low latency operation. For the latest JACK information, please consult the web site, <http://www.jackaudio.org>. OPTIONS
-d, --driver backend [backend-parameters ] Select the audio interface backend. The current list of supported backends is: alsa, coreaudio, dummy, freebob, oss sun and portau- dio. They are not all available on all platforms. All backend-parameters are optional. -h, --help Print a brief usage message describing the main jackd options. These do not include backend-parameters, which are listed using the --help option for each specific backend. Examples below show how to list them. -m, --no-mlock Do not attempt to lock memory, even if --realtime. -M, --midi-bufsize [ event-count ] Specify the size of the buffer used for MIDI ports. Units are "MIDI events per process() cycle", where an event occupies up to 4 bytes (as most common MIDI events do). The default buffer size is same as the one used for audio data, which will store about 2 MIDI events per sample. Typical values for event-count will range from 10 to about 500. Be aware that using very high values along with a large number of ports may cause JACK to fail to start because of the amount of memory that would be required. -n, --name server-name Name this jackd instance server-name. If unspecified, this name comes from the $JACK_DEFAULT_SERVER environment variable. It will be "default" if that is not defined. -p, --port-max n Set the maximum number of ports the JACK server can manage. The default value is 256. --replace-registry Remove the shared memory registry used by all JACK server instances before startup. This should rarely be used, and is intended only for occasions when the structure of this registry changes in ways that are incompatible across JACK versions (which is rare). -R, --realtime Use realtime scheduling (default = true). This is needed for reliable low-latency performance. On many systems, it requires jackd to run with special scheduler and memory allocation privileges, which may be obtained in several ways. -r, --no-realtime Do not use realtime scheduling. -P, --realtime-priority int When running --realtime, set the scheduler priority to int. --silent Silence any output during operation. -S, --sync This option does nothing in this implementation of JACK, but exists for command-line compatibility with JACK2 and possibly other versions. -T, --temporary Exit once all clients have closed their connections. -t, --timeout int Set client timeout limit in milliseconds. The default is 500 msec. In realtime mode the client timeout must be smaller than the watchdog timeout (5000 msec). -Z, --nozombies Prevent JACK from ever kicking out clients because they were too slow. This cancels the effect any specified timeout value, but JACK and its clients are still subject to the supervision of the watchdog thread or its equivalent. -C, --timeout-thres time Stop processing clients if JACK cannot complete the process cycle in time (typically caused by CPU overloading or misbehaved clients). The optional time argument specifies the number of miliseconds, during which consectutive process cycles must fail before JACK gives up (if the argument is not given, it defaults to 250). Processing will resume on the next change to the port graph (i.e. a port is added, removed, connected or disconnected) -u, --unlock Unlock libraries GTK+, QT, FLTK, Wine. -v, --verbose Give verbose output. -c, --clocksource ( c(ycle) | h(pet) | s(ystem) ) Select a specific wall clock (Cycle Counter, HPET timer, System timer). -V, --version Print the current JACK version number and exit. ALSA BACKEND OPTIONS -C, --capture [ name ] Provide only capture ports, unless combined with -D or -P. Parameterally set capture device name. -d, --device name The ALSA pcm device name to use. If none is specified, JACK will use "hw:0", the first hardware card defined in /etc/modules.conf. -z, --dither [rectangular,triangular,shaped,none] Set dithering mode. If none or unspecified, dithering is off. Only the first letter of the mode name is required. -D, --duplex Provide both capture and playback ports. Defaults to on unless only one of -P or -C is specified. -h, --help Print a brief usage message describing only the alsa backend parameters. -M, --hwmeter Enable hardware metering for devices that support it. Otherwise, use software metering. -H, --hwmon Enable hardware monitoring of capture ports. This is a method for obtaining "zero latency" monitoring of audio input. It requires support in hardware and from the underlying ALSA device driver. When enabled, requests to monitor capture ports will be satisfied by creating a direct signal path between audio interface input and output connectors, with no processing by the host computer at all. This offers the lowest possible latency for the monitored sig- nal. Presently (March 2003), only the RME Hammerfall series and cards based on the ICE1712 chipset (M-Audio Delta series, Terratec, and others) support --hwmon. In the future, some consumer cards may also be supported by modifying their mixer settings. Without --hwmon, port monitoring requires JACK to read audio into system memory, then copy it back out to the hardware again, impos- ing the basic JACK system latency determined by the --period and --nperiods parameters. -i, --inchannels int Number of capture channels. Default is maximum supported by hardware. -n, --nperiods int Specify the number of periods of playback latency. In seconds, this corresponds to --nperiods times --period divided by --rate. The default is 2, the minimum allowable. For most devices, there is no need for any other value with the --realtime option. With- out realtime privileges or with boards providing unreliable interrupts (like ymfpci), a larger value may yield fewer xruns. This can also help if the system is not tuned for reliable realtime scheduling. For most ALSA devices, the hardware buffer has exactly --period times --nperiods frames. Some devices demand a larger buffer. If so, JACK will use the smallest possible buffer containing at least --nperiods, but the playback latency does not increase. For USB audio devices it is recommended to use -n 3. Firewire devices supported by FFADO (formerly Freebob) are configured with -n 3 by default. -o, --outchannels int Number of playback channels. Default is maximum supported by hardware. -P, --playback [ name ] Provide only playback ports, unless combined with -D or -C. Optionally set playback device name. -p, --period int Specify the number of frames between JACK process() calls. This value must be a power of 2, and the default is 1024. If you need low latency, set -p as low as you can go without seeing xruns. A larger period size yields higher latency, but makes xruns less likely. The JACK capture latency in seconds is --period divided by --rate. -r, --rate int Specify the sample rate. The default is 48000. -S, --shorts Try to configure card for 16-bit samples first, only trying 32-bits if unsuccessful. Default is to prefer 32-bit samples. -s, --softmode Ignore xruns reported by the ALSA driver. This makes JACK less likely to disconnect unresponsive ports when running without --real- time. -X, --midi [seq|raw] Specify which ALSA MIDI system to provide access to. Using raw will provide a set of JACK MIDI ports that correspond to each raw ALSA device on the machine. Using seq will provide a set of JACK MIDI ports that correspond to each ALSA "sequencer" client (which includes each hardware MIDI port on the machine). raw provides slightly better performance but does not permit JACK MIDI communica- tion with software written to use the ALSA "sequencer" API. COREAUDIO BACKEND PARAMETERS -c --channel Maximum number of channels (default: 2) -i --channelin Maximum number of input channels (default: 2) -o --channelout Maximum number of output channels (default: 2) -C --capture Whether or not to capture (default: true) -P --playback Whether or not to playback (default: true) -D --duplex Capture and playback (default: true) -r --rate Sample rate (default: 44100) -p --period Frames per period (default: 128). Must be a power of 2. -n --name Driver name (default: none) -I --id Audio Device ID (default: 0) DUMMY BACKEND PARAMETERS -C, --capture int Specify number of capture ports. The default value is 2. -P, --playback int Specify number of playback ports. The default value is 2. -r, --rate int Specify sample rate. The default value is 48000. -p, --period int Specify the number of frames between JACK process() calls. This value must be a power of 2, and the default is 1024. If you need low latency, set -p as low as you can go without seeing xruns. A larger period size yields higher latency, but makes xruns less likely. The JACK capture latency in seconds is --period divided by --rate. -w, --wait int Specify number of usecs to wait between engine processes. The default value is 21333. NET BACKEND PARAMETERS -i, --audio-ins int Number of capture channels (default: 2) -o, --audio-outs int Number of playback channels (default: 2) -I, --midi-ins int Number of midi capture channels (default: 1) -O, --midi-outs int Number of midi playback channels (default: 1) -r, --rate int Sample rate (default: 48000) -p, --period int Frames per period (default: 1024) -n, --num-periods int Network latency setting in no. of periods (default: 5) -l, --listen-port int The socket port we are listening on for sync packets (default: 3000) -f, --factor int Factor for sample rate reduction (default: 1) -u, --upstream-factor int Factor for sample rate reduction on the upstream (default: 0) -c, --celt int sets celt encoding and number of kbits per channel (default: 0) -b, --bit-depth int Sample bit-depth (0 for float, 8 for 8bit and 16 for 16bit) (default: 0) -t, --transport-sync int Whether to slave the transport to the master transport (default: true) -a, --autoconf int Whether to use Autoconfig, or just start. (default: true) -R, --redundancy int Send packets N times (default: 1) -e, --native-endian int Dont convert samples to network byte order. (default: false) -J, --jitterval int attempted jitterbuffer microseconds on master (default: 0) -D, --always-deadline int always use deadline (default: false) OSS BACKEND PARAMETERS -r, --rate int Specify the sample rate. The default is 48000. -p, --period int Specify the number of frames between JACK process() calls. This value must be a power of 2, and the default is 1024. If you need low latency, set -p as low as you can go without seeing xruns. A larger period size yields higher latency, but makes xruns less likely. The JACK capture latency in seconds is --period divided by --rate. -n, --nperiods int Specify the number of periods in the hardware buffer. The default is 2. The period size (-p) times --nperiods times four is the JACK buffer size in bytes. The JACK output latency in seconds is --nperiods times --period divided by --rate. -w, --wordlength int Specify the sample size in bits. The default is 16. -i, --inchannels int Specify how many channels to capture (default: 2) -o, --outchannels int Specify number of playback channels (default: 2) -C, --capture device_file Specify input device for capture (default: /dev/dsp) -P, --playback device_file Specify output device for playback (default: /dev/dsp) -b, --ignorehwbuf boolean Specify, whether to ignore hardware period size (default: false) SUN BACKEND PARAMETERS -r, --rate int Specify the sample rate. The default is 48000. -p, --period int Specify the number of frames between JACK process() calls. This value must be a power of 2, and the default is 1024. If you need low latency, set -p as low as you can go without seeing xruns. A larger period size yields higher latency, but makes xruns less likely. The JACK capture latency in seconds is --period divided by --rate. -n, --nperiods int Specify the number of periods in the hardware buffer. The default is 2. The period size (-p) times --nperiods times four (assuming 2 channels 16-bit samples) is the JACK buffer size in bytes. The JACK output latency in seconds is --nperiods times --period divided by --rate. -w, --wordlength int Specify the sample size in bits. The default is 16. -i, --inchannels int Specify how many channels to capture (default: 2) -o, --outchannels int Specify number of playback channels (default: 2) -C, --capture device_file Specify input device for capture (default: /dev/audio) -P, --playback device_file Specify output device for playback (default: /dev/audio) -b, --ignorehwbuf boolean Specify, whether to ignore hardware period size (default: false) PORTAUDIO BACKEND PARAMETERS -c --channel Maximum number of channels (default: all available hardware channels) -i --channelin Maximum number of input channels (default: all available hardware channels) -o --channelout Maximum number of output channels (default: all available hardware channels) -C --capture Whether or not to capture (default: true) -P --playback Whether or not to playback (default: true) -D --duplex Capture and playback (default: true) -r --rate Sample rate (default: 48000) -p --period Frames per period (default: 1024). Must be a power of 2. -n --name Driver name (default: none) -z --dither Dithering mode (default: none) EXAMPLES
Print usage message for the parameters specific to each backend. jackd -d alsa --help jackd -d coreaudio --help jackd -d net --help jackd -d dummy --help jackd -d firewire --help jackd -d freebob --help jackd -d oss --help jackd -d sun --help jackd -d portaudio --help Run the JACK daemon with realtime priority using the first ALSA hardware card defined in /etc/modules.conf. jackstart --realtime --driver=alsa Run the JACK daemon with low latency giving verbose output, which can be helpful for trouble-shooting system latency problems. A reason- ably well-tuned system with a good sound card and a low-latency kernel can handle these values reliably. Some can do better. If you get xrun messages, try a larger buffer. Tuning a system for low latency can be challenging. The JACK FAQ, http://jackit.source- forge.net/docs/faq.php has some useful suggestions. jackstart -Rv -d alsa -p 128 -n 2 -r 44100 Run jackd with realtime priority using the "sblive" ALSA device defined in ~/.asoundrc. Apply shaped dithering to playback audio. jackd -R -d alsa -d sblive --dither=shaped Run jackd with no special privileges using the second ALSA hardware card defined in /etc/modules.conf. Any xruns reported by the ALSA backend will be ignored. The larger buffer helps reduce data loss. Rectangular dithering will be used for playback. jackd -d alsa -d hw:1 -p2048 -n3 --softmode -zr Run jackd in full-duplex mode using the ALSA hw:0,0 device for playback and the hw:0,2 device for capture. jackd -d alsa -P hw:0,0 -C hw:0,2 Run jackd in playback-only mode using the ALSA hw:0,0 device. jackd -d alsa -P hw:0,0 ENVIRONMENT
JACK is evolving a mechanism for automatically starting the server when needed. Any client started without a running JACK server will attempt to start one itself using the command line found in the first line of $HOME/.jackdrc if it exists, or /etc/jackdrc if it does not. If neither file exists, a built-in default command will be used, including the -T flag, which causes the server to shut down when all clients have exited. As a transition, this only happens when $JACK_START_SERVER is defined in the environment of the calling process. In the future this will become normal behavior. In either case, defining $JACK_NO_START_SERVER disables this feature. To change where JACK looks for the backend drivers, set $JACK_DRIVER_DIR. $JACK_DEFAULT_SERVER specifies the default server name. If not defined, the string "default" is used. If set in their respective environ- ments, this affects jackd unless its --name parameter is set, and all JACK clients unless they pass an explicit name to jack_client_open(). SEE ALSO
: http://www.jackaudio.org The official JACK website with news, docs and a list of JACK clients. http://jackaudio.org/email The JACK developers' mailing list. Subscribe, to take part in development of JACK or JACK clients. User questions are also welcome, there is no user-specific mailing list. http://www.jackosx.com/ Tools specific to the Mac OS X version of JACK. http://www.alsa-project.org The Advanced Linux Sound Architecture. BUGS
Please report bugs to http://trac.jackaudio.org/ AUTHORS
Architect and original implementor: Paul Davis Original design Group: Paul Davis, David Olofson, Kai Vehmanen, Benno Sennoner, Richard Guenther, and other members of the Linux Audio Developers group. Programming: Paul Davis, Jack O'Quin, Taybin Rutkin, Stephane Letz, Fernando Pablo Lopez-Lezcano, Steve Harris, Jeremy Hall, Andy Wingo, Kai Vehmanen, Melanie Thielker, Jussi Laako, Tilman Linneweh, Johnny Petrantoni, Torben Hohn. Manpage written by Stefan Schwandter, Jack O'Quin and Alexandre Prokoudine. April 2006 0.122.0 JACKD(1)
Man Page