VMSTAT(8) BSD System Manager's Manual VMSTAT(8)
NAME
vmstat -- report virtual memory statistics
SYNOPSIS
vmstat [-afHhimPsz] [-M core [-N system]] [-c count] [-n devs] [-p type,if,pass] [-w wait] [disks ...] [wait [count]]
DESCRIPTION
The vmstat utility reports certain kernel statistics kept about process, virtual memory, disk, trap and cpu activity.
If the -M option is not specified, information is obtained from the currently running kernel via the sysctl(3) interface. Otherwise, infor-
mation is read from the specified core file, using the name list from the specified kernel image (or from the default image).
The options are as follows:
-a When used with -i, include statistics about interrupts that have never been generated.
-c Repeat the display count times. The first display is for the time since a reboot and each subsequent report is for the time period
since the last display. If no repeat count is specified, and -w is specified, the default is infinity, otherwise the default is one.
-f Report on the number fork(2), vfork(2) and rfork(2) system calls since system startup, and the number of pages of virtual memory
involved in each.
-h Changes memory columns into more easily human readable form. The default if standard output is a terminal device.
-H Changes memory columns into straight numbers. The default if standard output is not a terminal device (such as a script).
-i Report on the number of interrupts taken by each device since system startup.
-M Extract values associated with the name list from the specified core.
-N If -M is also specified, extract the name list from the specified system instead of the default, which is the kernel image the system
has booted from.
-m Report on the usage of kernel dynamic memory allocated using malloc(9) by type.
-n Change the maximum number of disks to display from the default of 2.
-P Report per-cpu system/user/idle cpu statistics.
-p Specify which types of devices to display. There are three different categories of devices:
device type:
da Direct Access devices
sa Sequential Access devices
printer Printers
proc Processor devices
worm Write Once Read Multiple devices
cd CD devices
scanner Scanner devices
optical Optical Memory devices
changer Medium Changer devices
comm Communication devices
array Storage Array devices
enclosure Enclosure Services devices
floppy Floppy devices
interface:
IDE Integrated Drive Electronics devices
SCSI Small Computer System Interface devices
other Any other device interface
passthrough:
pass Passthrough devices
The user must specify at least one device type, and may specify at most one device type from each category. Multiple device types in
a single device type statement must be separated by commas.
Any number of -p arguments may be specified on the command line. All -p arguments are ORed together to form a matching expression
against which all devices in the system are compared. Any device that fully matches any -p argument will be included in the vmstat
output, up to two devices, or the maximum number of devices specified by the user.
-s Display the contents of the sum structure, giving the total number of several kinds of paging related events which have occurred
since system startup.
-w Pause wait seconds between each display. If no repeat wait interval is specified, the default is 1 second. The vmstat command will
accept and honor a non-integer number of seconds.
-z Report on memory used by the kernel zone allocator, uma(9), by zone.
The wait and count arguments may be given after their respective flags at any point on the command line before the disks argument(s), or
without their flags, as the final argument(s). The latter form is accepted for backwards compatibility, but it is preferred to use the forms
with -w and -c to avoid ambiguity.
By default, vmstat displays the following information:
procs Information about the numbers of processes in various states.
r in run queue
b blocked for resources (i/o, paging, etc.)
w runnable or short sleeper (< 20 secs) but swapped
memory Information about the usage of virtual and real memory. Virtual pages (reported in units of 1024 bytes) are considered active if
they belong to processes which are running or have run in the last 20 seconds.
avm active virtual pages
fre size of the free list
page Information about page faults and paging activity. These are averaged each five seconds, and given in units per second.
flt total number of page faults
re page reclaims (simulating reference bits)
pi pages paged in
po pages paged out
fr pages freed per second
sr pages scanned by clock algorithm, per-second
disks Disk operations per second (this field is system dependent). Typically paging will be split across the available drives. The header
of the field is the first two characters of the disk name and the unit number. If more than two disk drives are configured in the
system, vmstat displays only the first two drives, unless the user specifies the -n argument to increase the number of drives dis-
played. This will probably cause the display to exceed 80 columns, however. To force vmstat to display specific drives, their names
may be supplied on the command line. The vmstat utility defaults to show disks first, and then various other random devices in the
system to add up to two devices, if there are that many devices in the system. If devices are specified on the command line, or if a
device type matching pattern is specified (see above), vmstat will only display the given devices or the devices matching the pat-
tern, and will not randomly select other devices in the system.
faults Trap/interrupt rate averages per second over last 5 seconds.
in device interrupts per interval (including clock interrupts)
sy system calls per interval
cs cpu context switch rate (switches/interval)
cpu Breakdown of percentage usage of CPU time.
us user time for normal and low priority processes
sy system time
id cpu idle
FILES
/boot/kernel/kernel default kernel namelist
/dev/kmem default memory file
EXAMPLES
The command:
vmstat -w 5
will print what the system is doing every five seconds; this is a good choice of printing interval since this is how often some of the sta-
tistics are sampled in the system. Others vary every second and running the output for a while will make it apparent which are recomputed
every second.
The command:
vmstat -p da -p cd -w 1
will tell vmstat to select the first two direct access or CDROM devices and display statistics on those devices, as well as other systems
statistics every second.
SEE ALSO
fstat(1), netstat(1), nfsstat(1), ps(1), systat(1), libmemstat(3), gstat(8), iostat(8), pstat(8), sysctl(8), malloc(9), uma(9)
The sections starting with ``Interpreting system activity'' in Installing and Operating 4.3BSD.
BUGS
The -c and -w options are only available with the default output.
BSD
August 8, 2014 BSD