GAMATRONIC(8) NUT Manual GAMATRONIC(8)NAME
gamatronic - Driver for Gamatronic UPS equipment
NOTE
This man page only documents the hardware-specific features of the gamatronic driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
Various - Rebuilt to work with Gamatronic UPS Units, but should recognize any UPS that speaks the SEC protocol at 1200-19200 bps.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
AUTHOR
Nadav Moskovitch <blutz@walla.com>
SEE ALSO
The core driver
nutupsdrv(8)
Internet resources
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 GAMATRONIC(8)
Check Out this Related Man Page
LIEBERT(8) NUT Manual LIEBERT(8)NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)
Introduction
Originally, we only had one shell on unix. When ran a command, the shell would attempt to invoke one of the exec() system calls on it. It the command was an executable, the exec would succeed and the command would run. If the exec() failed, the shell would not give up, instead it... (3 Replies)
FreeBSD Kernel Internals, Dr. Marshall Kirk McKusick
nwbqBdghh6E
The first hour of Marshall Kirk McKusick's course on FreeBSD kernel internals based on his book, The Design and Implementation of the FreeBSD Operating System. (0 Replies)
Introduction
I have seen some misinformation regarding Unix file permissions. I will try to set the record straight. Take a look at this example of some output from ls:
$ ls -ld /usr/bin /usr/bin/cat
drwxrwxr-x 3 root bin 8704 Sep 23 2004 /usr/bin
-r-xr-xr-x 1 bin bin ... (6 Replies)
Suppose I have a main() function with only one malloc statement allocating say some 1 gb memory. Also say my system has 1 gb of ram.
main()
{
malloc(1gb)
return(0)
}
The program above exits without freeing the memory.
In this case will the 1 gb of heap memory be returned... (9 Replies)
I see lot of ad-hoc shell scripts in our servers which don't have a shebang at the beginning .
Does this mean that it will run on any shell ?
Is it a good practice to create scripts (even ad-hoc ones) without shebang ? (16 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
A shout out to Scott who gave me a helping hand to turn a simple sample Vue.js app I wrote yesterday into a Vue.js component:
Vue.component("unix-time", {
template: `<div class="time">{{unixtime}}</div>`,
data() {
return {
unixtime: ""
};
},
methods: {
... (1 Reply)
i read here that linux provides no way to determine when a directory was created.
https://www.unix.com/shell-programming-and-scripting/157874-creation-date-directory.htmlI have a directory /home/andy/scripts that had a README file in it.
That file says
I put the script in that directory and... (3 Replies)
Hello.
I can use any particular (stupid or not) format when using bash date command.
Example :
~> date --date "now" '+%Y-%m-%d %H!%M!%S'
2019-06-03 12!55!33or
~> date --date "now" '+%Y£%m£%d %H¤%M¤%S'
2019£06£03 12¤57¤36
or
~> date --date "now" '+%Y-%m-%d %H-%M-%S'
2019-06-03 12-58-51
... (4 Replies)
Morning All
So, I am starting looking into the world of UNIX for a new job (luckily not my primary function!) and I am looking to get stared. Like anything I seem to learn best by trying things out first in an environment but I have a key question:
Currently I use Oracle VirtualBox, can... (8 Replies)
I've installed Slack 14.2 on /dev/sda1 (/dev/sda2 is swap) and FreeBSD 12 on /dev/sda3 and lilo is the boot manager.
FreeBSD slices are as follows;
/ on /dev/ada0S3a, swap on /dev/ada0s3e, /var on /dev/ada0s3b, /tmp on /dev/ada0s3d and /usr on /dev/ada0s3f.
I hesitate to install Solaris 10... (2 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)