EVERUPS(8) NUT Manual EVERUPS(8)NAME
everups - Driver for Ever UPS models
NOTE
This man page only documents the hardware-specific features of the everups driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver should recognize the NET *-DPC and AP *-PRO models.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This UPS can only switch off the load if it's running on battery. This means you may be vulnerable to power races if your shutdown scripts
don't sleep and force a reboot.
AUTHOR
Bartek Szady <bszx@bszxdomain.edu.eu.org>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 EVERUPS(8)
Check Out this Related Man Page
TRIPPLITESU(8) NUT Manual TRIPPLITESU(8)NAME
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
NOTE
This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports the Tripp Lite SmartOnline family (via the serial port).
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
lowbatt=num
Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low
battery until there are only a few seconds left. Common values are around 25--30.
AUTHOR
Allan N. Hessenflow <allanh@kallisti.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Other drivers for Tripp-Lite hardware:
tripplite(8), tripplite_usb(8), usbhid-ups(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 TRIPPLITESU(8)
Introduction
Originally, we only had one shell on unix. When ran a command, the shell would attempt to invoke one of the exec() system calls on it. It the command was an executable, the exec would succeed and the command would run. If the exec() failed, the shell would not give up, instead it... (3 Replies)
FreeBSD Kernel Internals, Dr. Marshall Kirk McKusick
nwbqBdghh6E
The first hour of Marshall Kirk McKusick's course on FreeBSD kernel internals based on his book, The Design and Implementation of the FreeBSD Operating System. (0 Replies)
Introduction
I have seen some misinformation regarding Unix file permissions. I will try to set the record straight. Take a look at this example of some output from ls:
$ ls -ld /usr/bin /usr/bin/cat
drwxrwxr-x 3 root bin 8704 Sep 23 2004 /usr/bin
-r-xr-xr-x 1 bin bin ... (6 Replies)
Suppose I have a main() function with only one malloc statement allocating say some 1 gb memory. Also say my system has 1 gb of ram.
main()
{
malloc(1gb)
return(0)
}
The program above exits without freeing the memory.
In this case will the 1 gb of heap memory be returned... (9 Replies)
I see lot of ad-hoc shell scripts in our servers which don't have a shebang at the beginning .
Does this mean that it will run on any shell ?
Is it a good practice to create scripts (even ad-hoc ones) without shebang ? (16 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
A shout out to Scott who gave me a helping hand to turn a simple sample Vue.js app I wrote yesterday into a Vue.js component:
Vue.component("unix-time", {
template: `<div class="time">{{unixtime}}</div>`,
data() {
return {
unixtime: ""
};
},
methods: {
... (1 Reply)
i read here that linux provides no way to determine when a directory was created.
https://www.unix.com/shell-programming-and-scripting/157874-creation-date-directory.htmlI have a directory /home/andy/scripts that had a README file in it.
That file says
I put the script in that directory and... (3 Replies)
Hello.
I can use any particular (stupid or not) format when using bash date command.
Example :
~> date --date "now" '+%Y-%m-%d %H!%M!%S'
2019-06-03 12!55!33or
~> date --date "now" '+%Y£%m£%d %H¤%M¤%S'
2019£06£03 12¤57¤36
or
~> date --date "now" '+%Y-%m-%d %H-%M-%S'
2019-06-03 12-58-51
... (4 Replies)
Morning All
So, I am starting looking into the world of UNIX for a new job (luckily not my primary function!) and I am looking to get stared. Like anything I seem to learn best by trying things out first in an environment but I have a key question:
Currently I use Oracle VirtualBox, can... (8 Replies)
I've installed Slack 14.2 on /dev/sda1 (/dev/sda2 is swap) and FreeBSD 12 on /dev/sda3 and lilo is the boot manager.
FreeBSD slices are as follows;
/ on /dev/ada0S3a, swap on /dev/ada0s3e, /var on /dev/ada0s3b, /tmp on /dev/ada0s3d and /usr on /dev/ada0s3f.
I hesitate to install Solaris 10... (2 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)