SECURITY(7) BSD Miscellaneous Information Manual SECURITY(7)
security -- introduction to security under FreeBSD
Security is a function that begins and ends with the system administrator. While all BSD multi-user systems have some inherent security, the
job of building and maintaining additional security mechanisms to keep users ``honest'' is probably one of the single largest undertakings of
the sysadmin. Machines are only as secure as you make them, and security concerns are ever competing with the human necessity for conve-
nience. UNIX systems, in general, are capable of running a huge number of simultaneous processes and many of these processes operate as
servers -- meaning that external entities can connect and talk to them. As yesterday's mini-computers and mainframes become today's desk-
tops, and as computers become networked and internetworked, security becomes an ever bigger issue.
Security is best implemented through a layered onion approach. In a nutshell, what you want to do is to create as many layers of security as
are convenient and then carefully monitor the system for intrusions.
System security also pertains to dealing with various forms of attacks, including attacks that attempt to crash or otherwise make a system
unusable but do not attempt to break root. Security concerns can be split up into several categories:
1. Denial of Service attacks (DoS)
2. User account compromises
3. Root compromise through accessible servers
4. Root compromise via user accounts
5. Backdoor creation
A denial of service attack is an action that deprives the machine of needed resources. Typically, DoS attacks are brute-force mechanisms
that attempt to crash or otherwise make a machine unusable by overwhelming its servers or network stack. Some DoS attacks try to take advan-
tages of bugs in the networking stack to crash a machine with a single packet. The latter can only be fixed by applying a bug fix to the
kernel. Attacks on servers can often be fixed by properly specifying options to limit the load the servers incur on the system under adverse
conditions. Brute-force network attacks are harder to deal with. A spoofed-packet attack, for example, is nearly impossible to stop short
of cutting your system off from the Internet. It may not be able to take your machine down, but it can fill up your Internet pipe.
A user account compromise is even more common than a DoS attack. Many sysadmins still run standard telnetd(8), rlogind(8), rshd(8), and
ftpd(8) servers on their machines. These servers, by default, do not operate over encrypted connections. The result is that if you have any
moderate-sized user base, one or more of your users logging into your system from a remote location (which is the most common and convenient
way to log in to a system) will have his or her password sniffed. The attentive system administrator will analyze his remote access logs
looking for suspicious source addresses even for successful logins.
One must always assume that once an attacker has access to a user account, the attacker can break root. However, the reality is that in a
well secured and maintained system, access to a user account does not necessarily give the attacker access to root. The distinction is
important because without access to root the attacker cannot generally hide his tracks and may, at best, be able to do nothing more than mess
with the user's files or crash the machine. User account compromises are very common because users tend not to take the precautions that
System administrators must keep in mind that there are potentially many ways to break root on a machine. The attacker may know the root
password, the attacker may find a bug in a root-run server and be able to break root over a network connection to that server, or the
attacker may know of a bug in an SUID-root program that allows the attacker to break root once he has broken into a user's account. If an
attacker has found a way to break root on a machine, the attacker may not have a need to install a backdoor. Many of the root holes found
and closed to date involve a considerable amount of work by the attacker to clean up after himself, so most attackers do install backdoors.
This gives you a convenient way to detect the attacker. Making it impossible for an attacker to install a backdoor may actually be detrimen-
tal to your security because it will not close off the hole the attacker used to break in originally.
Security remedies should always be implemented with a multi-layered ``onion peel'' approach and can be categorized as follows:
1. Securing root and staff accounts
2. Securing root -- root-run servers and SUID/SGID binaries
3. Securing user accounts
4. Securing the password file
5. Securing the kernel core, raw devices, and file systems
6. Quick detection of inappropriate changes made to the system
SECURING THE ROOT ACCOUNT AND SECURING STAFF ACCOUNTS
Do not bother securing staff accounts if you have not secured the root account. Most systems have a password assigned to the root account.
The first thing you do is assume that the password is always compromised. This does not mean that you should remove the password. The pass-
word is almost always necessary for console access to the machine. What it does mean is that you should not make it possible to use the
password outside of the console or possibly even with a su(1) utility. For example, make sure that your PTYs are specified as being
``insecure'' in the /etc/ttys file so that direct root logins via telnet(1) or rlogin(1) are disallowed. If using other login services such
as sshd(8), make sure that direct root logins are disabled there as well. Consider every access method -- services such as ftp(1) often fall
through the cracks. Direct root logins should only be allowed via the system console.
Of course, as a sysadmin you have to be able to get to root, so we open up a few holes. But we make sure these holes require additional
password verification to operate. One way to make root accessible is to add appropriate staff accounts to the ``wheel'' group (in
/etc/group). The staff members placed in the wheel group are allowed to su(1) to root. You should never give staff members native wheel
access by putting them in the wheel group in their password entry. Staff accounts should be placed in a ``staff'' group, and then added to
the wheel group via the /etc/group file. Only those staff members who actually need to have root access should be placed in the wheel group.
It is also possible, when using an authentication method such as Kerberos, to use Kerberos's .k5login file in the root account to allow a
ksu(1) to root without having to place anyone at all in the wheel group. This may be the better solution since the wheel mechanism still
allows an intruder to break root if the intruder has gotten hold of your password file and can break into a staff account. While having the
wheel mechanism is better than having nothing at all, it is not necessarily the safest option.
An indirect way to secure the root account is to secure your staff accounts by using an alternative login access method and *'ing out the
crypted password for the staff accounts. This way an intruder may be able to steal the password file but will not be able to break into any
staff accounts or root, even if root has a crypted password associated with it (assuming, of course, that you have limited root access to the
console). Staff members get into their staff accounts through a secure login mechanism such as kerberos(8) or ssh(1) using a private/public
key pair. When you use something like Kerberos you generally must secure the machines which run the Kerberos servers and your desktop work-
station. When you use a public/private key pair with SSH, you must generally secure the machine you are logging in from (typically your
workstation), but you can also add an additional layer of protection to the key pair by password protecting the keypair when you create it
with ssh-keygen(1). Being able to *-out the passwords for staff accounts also guarantees that staff members can only log in through secure
access methods that you have set up. You can thus force all staff members to use secure, encrypted connections for all their sessions which
closes an important hole used by many intruders: that of sniffing the network from an unrelated, less secure machine.
The more indirect security mechanisms also assume that you are logging in from a more restrictive server to a less restrictive server. For
example, if your main box is running all sorts of servers, your workstation should not be running any. In order for your workstation to be
reasonably secure you should run as few servers as possible, up to and including no servers at all, and you should run a password-protected
screen blanker. Of course, given physical access to a workstation, an attacker can break any sort of security you put on it. This is defi-
nitely a problem that you should consider but you should also consider the fact that the vast majority of break-ins occur remotely, over a
network, from people who do not have physical access to your workstation or servers.
Using something like Kerberos also gives you the ability to disable or change the password for a staff account in one place and have it imme-
diately affect all the machines the staff member may have an account on. If a staff member's account gets compromised, the ability to
instantly change his password on all machines should not be underrated. With discrete passwords, changing a password on N machines can be a
mess. You can also impose re-passwording restrictions with Kerberos: not only can a Kerberos ticket be made to timeout after a while, but
the Kerberos system can require that the user choose a new password after a certain period of time (say, once a month).
SECURING ROOT -- ROOT-RUN SERVERS AND SUID/SGID BINARIES
The prudent sysadmin only runs the servers he needs to, no more, no less. Be aware that third party servers are often the most bug-prone.
For example, running an old version of imapd(8) or popper(8) (ports/mail/popper) is like giving a universal root ticket out to the entire
world. Never run a server that you have not checked out carefully. Many servers do not need to be run as root. For example, the talkd(8),
comsat(8), and fingerd(8) daemons can be run in special user ``sandboxes''. A sandbox is not perfect unless you go to a large amount of
trouble, but the onion approach to security still stands: if someone is able to break in through a server running in a sandbox, they still
have to break out of the sandbox. The more layers the attacker must break through, the lower the likelihood of his success. Root holes have
historically been found in virtually every server ever run as root, including basic system servers. If you are running a machine through
which people only log in via sshd(8) and never log in via telnetd(8), rshd(8), or rlogind(8), then turn off those services!
FreeBSD now defaults to running talkd(8), comsat(8), and fingerd(8) in a sandbox. Depending on whether you are installing a new system or
upgrading an existing system, the special user accounts used by these sandboxes may not be installed. The prudent sysadmin would research
and implement sandboxes for servers whenever possible.
There are a number of other servers that typically do not run in sandboxes: sendmail(8), popper(8), imapd(8), ftpd(8), and others. There are
alternatives to some of these, but installing them may require more work than you are willing to put (the convenience factor strikes again).
You may have to run these servers as root and rely on other mechanisms to detect break-ins that might occur through them.
The other big potential root hole in a system are the SUID-root and SGID binaries installed on the system. Most of these binaries, such as
rlogin(1), reside in /bin, /sbin, /usr/bin, or /usr/sbin. While nothing is 100% safe, the system-default SUID and SGID binaries can be con-
sidered reasonably safe. Still, root holes are occasionally found in these binaries. A root hole was found in Xlib in 1998 that made
xterm(1) (ports/x11/xterm) (which is typically SUID) vulnerable. It is better to be safe than sorry and the prudent sysadmin will restrict
SUID binaries that only staff should run to a special group that only staff can access, and get rid of (``chmod 000'') any SUID binaries that
nobody uses. A server with no display generally does not need an xterm(1) binary. SGID binaries can be almost as dangerous. If an intruder
can break an SGID-kmem binary the intruder might be able to read /dev/kmem and thus read the crypted password file, potentially compromising
any passworded account. Alternatively an intruder who breaks group ``kmem'' can monitor keystrokes sent through PTYs, including PTYs used by
users who log in through secure methods. An intruder that breaks the ``tty'' group can write to almost any user's TTY. If a user is running
a terminal program or emulator with a keyboard-simulation feature, the intruder can potentially generate a data stream that causes the user's
terminal to echo a command, which is then run as that user.
SECURING USER ACCOUNTS
User accounts are usually the most difficult to secure. While you can impose draconian access restrictions on your staff and *-out their
passwords, you may not be able to do so with any general user accounts you might have. If you do have sufficient control then you may win
out and be able to secure the user accounts properly. If not, you simply have to be more vigilant in your monitoring of those accounts. Use
of SSH and Kerberos for user accounts is more problematic due to the extra administration and technical support required, but still a very
good solution compared to a crypted password file.
SECURING THE PASSWORD FILE
The only sure fire way is to *-out as many passwords as you can and use SSH or Kerberos for access to those accounts. Even though the
crypted password file (/etc/spwd.db) can only be read by root, it may be possible for an intruder to obtain read access to that file even if
the attacker cannot obtain root-write access.
Your security scripts should always check for and report changes to the password file (see CHECKING FILE INTEGRITY below).
SECURING THE KERNEL CORE, RAW DEVICES, AND FILE SYSTEMS
If an attacker breaks root he can do just about anything, but there are certain conveniences. For example, most modern kernels have a packet
sniffing device driver built in. Under FreeBSD it is called the bpf(4) device. An intruder will commonly attempt to run a packet sniffer on
a compromised machine. You do not need to give the intruder the capability and most systems should not have the bpf(4) device compiled in.
But even if you turn off the bpf(4) device, you still have /dev/mem and /dev/kmem to worry about. For that matter, the intruder can still
write to raw disk devices. Also, there is another kernel feature called the module loader, kldload(8). An enterprising intruder can use a
KLD module to install his own bpf(4) device or other sniffing device on a running kernel. To avoid these problems you have to run the kernel
at a higher security level, at least level 1. The security level can be set with a sysctl(8) on the kern.securelevel variable. Once you
have set the security level to 1, write access to raw devices will be denied and special chflags(1) flags, such as schg, will be enforced.
You must also ensure that the schg flag is set on critical startup binaries, directories, and script files -- everything that gets run up to
the point where the security level is set. This might be overdoing it, and upgrading the system is much more difficult when you operate at a
higher security level. You may compromise and run the system at a higher security level but not set the schg flag for every system file and
directory under the sun. Another possibility is to simply mount / and /usr read-only. It should be noted that being too draconian in what
you attempt to protect may prevent the all-important detection of an intrusion.
The kernel runs with five different security levels. Any super-user process can raise the level, but no process can lower it. The security
-1 Permanently insecure mode - always run the system in insecure mode. This is the default initial value.
0 Insecure mode - immutable and append-only flags may be turned off. All devices may be read or written subject to their permissions.
1 Secure mode - the system immutable and system append-only flags may not be turned off; disks for mounted file systems, /dev/mem and
/dev/kmem may not be opened for writing; /dev/io (if your platform has it) may not be opened at all; kernel modules (see kld(4)) may
not be loaded or unloaded. The kernel debugger may not be entered using the debug.kdb.enter sysctl. A panic or trap cannot be forced
using the debug.kdb.panic and other sysctl's.
2 Highly secure mode - same as secure mode, plus disks may not be opened for writing (except by mount(2)) whether mounted or not. This
level precludes tampering with file systems by unmounting them, but also inhibits running newfs(8) while the system is multi-user.
In addition, kernel time changes are restricted to less than or equal to one second. Attempts to change the time by more than this
will log the message ``Time adjustment clamped to +1 second''.
3 Network secure mode - same as highly secure mode, plus IP packet filter rules (see ipfw(8), ipfirewall(4) and pfctl(8)) cannot be
changed and dummynet(4) or pf(4) configuration cannot be adjusted.
The security level can be configured with variables documented in rc.conf(5).
CHECKING FILE INTEGRITY
: BINARIES, CONFIG FILES, ETC
When it comes right down to it, you can only protect your core system configuration and control files so much before the convenience factor
rears its ugly head. For example, using chflags(1) to set the schg bit on most of the files in / and /usr is probably counterproductive
because while it may protect the files, it also closes a detection window. The last layer of your security onion is perhaps the most impor-
tant -- detection. The rest of your security is pretty much useless (or, worse, presents you with a false sense of safety) if you cannot
detect potential incursions. Half the job of the onion is to slow down the attacker rather than stop him in order to give the detection
layer a chance to catch him in the act.
The best way to detect an incursion is to look for modified, missing, or unexpected files. The best way to look for modified files is from
another (often centralized) limited-access system. Writing your security scripts on the extra-secure limited-access system makes them mostly
invisible to potential attackers, and this is important. In order to take maximum advantage you generally have to give the limited-access
box significant access to the other machines in the business, usually either by doing a read-only NFS export of the other machines to the
limited-access box, or by setting up SSH keypairs to allow the limit-access box to SSH to the other machines. Except for its network traf-
fic, NFS is the least visible method -- allowing you to monitor the file systems on each client box virtually undetected. If your limited-
access server is connected to the client boxes through a switch, the NFS method is often the better choice. If your limited-access server is
connected to the client boxes through a hub or through several layers of routing, the NFS method may be too insecure (network-wise) and using
SSH may be the better choice even with the audit-trail tracks that SSH lays.
Once you give a limit-access box at least read access to the client systems it is supposed to monitor, you must write scripts to do the
actual monitoring. Given an NFS mount, you can write scripts out of simple system utilities such as find(1) and md5(1). It is best to phys-
ically md5(1) the client-box files boxes at least once a day, and to test control files such as those found in /etc and /usr/local/etc even
more often. When mismatches are found relative to the base MD5 information the limited-access machine knows is valid, it should scream at a
sysadmin to go check it out. A good security script will also check for inappropriate SUID binaries and for new or deleted files on system
partitions such as / and /usr.
When using SSH rather than NFS, writing the security script is much more difficult. You essentially have to scp(1) the scripts to the client
box in order to run them, making them visible, and for safety you also need to scp(1) the binaries (such as find(1)) that those scripts use.
The sshd(8) daemon on the client box may already be compromised. All in all, using SSH may be necessary when running over unsecure links,
but it is also a lot harder to deal with.
A good security script will also check for changes to user and staff members access configuration files: .rhosts, .shosts,
.ssh/authorized_keys and so forth, files that might fall outside the purview of the MD5 check.
If you have a huge amount of user disk space it may take too long to run through every file on those partitions. In this case, setting mount
flags to disallow SUID binaries on those partitions is a good idea. The nosuid option (see mount(8)) is what you want to look into. I would
scan them anyway at least once a week, since the object of this layer is to detect a break-in whether or not the break-in is effective.
Process accounting (see accton(8)) is a relatively low-overhead feature of the operating system which I recommend using as a post-break-in
evaluation mechanism. It is especially useful in tracking down how an intruder has actually broken into a system, assuming the file is still
intact after the break-in occurs.
Finally, security scripts should process the log files and the logs themselves should be generated in as secure a manner as possible --
remote syslog can be very useful. An intruder tries to cover his tracks, and log files are critical to the sysadmin trying to track down the
time and method of the initial break-in. One way to keep a permanent record of the log files is to run the system console to a serial port
and collect the information on a continuing basis through a secure machine monitoring the consoles.
A little paranoia never hurts. As a rule, a sysadmin can add any number of security features as long as they do not affect convenience, and
can add security features that do affect convenience with some added thought. Even more importantly, a security administrator should mix it
up a bit -- if you use recommendations such as those given by this manual page verbatim, you give away your methodologies to the prospective
attacker who also has access to this manual page.
SPECIAL SECTION ON DoS ATTACKS
This section covers Denial of Service attacks. A DoS attack is typically a packet attack. While there is not much you can do about modern
spoofed packet attacks that saturate your network, you can generally limit the damage by ensuring that the attacks cannot take down your
1. Limiting server forks
2. Limiting springboard attacks (ICMP response attacks, ping broadcast, etc.)
3. Kernel Route Cache
A common DoS attack is against a forking server that attempts to cause the server to eat processes, file descriptors, and memory until the
machine dies. The inetd(8) server has several options to limit this sort of attack. It should be noted that while it is possible to prevent
a machine from going down it is not generally possible to prevent a service from being disrupted by the attack. Read the inetd(8) manual
page carefully and pay specific attention to the -c, -C, and -R options. Note that spoofed-IP attacks will circumvent the -C option to
inetd(8), so typically a combination of options must be used. Some standalone servers have self-fork-limitation parameters.
The sendmail(8) daemon has its -OMaxDaemonChildren option which tends to work much better than trying to use sendmail(8)'s load limiting
options due to the load lag. You should specify a MaxDaemonChildren parameter when you start sendmail(8) high enough to handle your expected
load but not so high that the computer cannot handle that number of sendmail's without falling on its face. It is also prudent to run
sendmail(8) in ``queued'' mode (-ODeliveryMode=queued) and to run the daemon (``sendmail -bd'') separate from the queue-runs (``sendmail
-q15m''). If you still want real-time delivery you can run the queue at a much lower interval, such as -q1m, but be sure to specify a rea-
sonable MaxDaemonChildren option for that sendmail(8) to prevent cascade failures.
The syslogd(8) daemon can be attacked directly and it is strongly recommended that you use the -s option whenever possible, and the -a option
You should also be fairly careful with connect-back services such as tcpwrapper's reverse-identd, which can be attacked directly. You gener-
ally do not want to use the reverse-ident feature of tcpwrappers for this reason.
It is a very good idea to protect internal services from external access by firewalling them off at your border routers. The idea here is to
prevent saturation attacks from outside your LAN, not so much to protect internal services from network-based root compromise. Always con-
figure an exclusive firewall, i.e., 'firewall everything except ports A, B, C, D, and M-Z'. This way you can firewall off all of your low
ports except for certain specific services such as talkd(8), sendmail(8), and other internet-accessible services. If you try to configure
the firewall the other way -- as an inclusive or permissive firewall, there is a good chance that you will forget to ``close'' a couple of
services or that you will add a new internal service and forget to update the firewall. You can still open up the high-numbered port range
on the firewall to allow permissive-like operation without compromising your low ports. Also take note that FreeBSD allows you to control
the range of port numbers used for dynamic binding via the various net.inet.ip.portrange sysctl's (``sysctl net.inet.ip.portrange''), which
can also ease the complexity of your firewall's configuration. I usually use a normal first/last range of 4000 to 5000, and a hiport range
of 49152 to 65535, then block everything under 4000 off in my firewall (except for certain specific internet-accessible ports, of course).
Another common DoS attack is called a springboard attack -- to attack a server in a manner that causes the server to generate responses which
then overload the server, the local network, or some other machine. The most common attack of this nature is the ICMP PING BROADCAST attack.
The attacker spoofs ping packets sent to your LAN's broadcast address with the source IP address set to the actual machine they wish to
attack. If your border routers are not configured to stomp on ping's to broadcast addresses, your LAN winds up generating sufficient
responses to the spoofed source address to saturate the victim, especially when the attacker uses the same trick on several dozen broadcast
addresses over several dozen different networks at once. Broadcast attacks of over a hundred and twenty megabits have been measured. A sec-
ond common springboard attack is against the ICMP error reporting system. By constructing packets that generate ICMP error responses, an
attacker can saturate a server's incoming network and cause the server to saturate its outgoing network with ICMP responses. This type of
attack can also crash the server by running it out of mbuf's, especially if the server cannot drain the ICMP responses it generates fast
enough. The FreeBSD kernel has a new kernel compile option called ICMP_BANDLIM which limits the effectiveness of these sorts of attacks.
The last major class of springboard attacks is related to certain internal inetd(8) services such as the UDP echo service. An attacker sim-
ply spoofs a UDP packet with the source address being server A's echo port, and the destination address being server B's echo port, where
server A and B are both on your LAN. The two servers then bounce this one packet back and forth between each other. The attacker can over-
load both servers and their LANs simply by injecting a few packets in this manner. Similar problems exist with the internal chargen port. A
competent sysadmin will turn off all of these inetd(8)-internal test services.
ACCESS ISSUES WITH KERBEROS AND SSH
There are a few issues with both Kerberos and SSH that need to be addressed if you intend to use them. Kerberos5 is an excellent authentica-
tion protocol but the kerberized telnet(1) and rlogin(1) suck rocks. There are bugs that make them unsuitable for dealing with binary
streams. Also, by default Kerberos does not encrypt a session unless you use the -x option. SSH encrypts everything by default.
SSH works quite well in every respect except when it is set up to forward encryption keys. What this means is that if you have a secure
workstation holding keys that give you access to the rest of the system, and you ssh(1) to an unsecure machine, your keys become exposed.
The actual keys themselves are not exposed, but ssh(1) installs a forwarding port for the duration of your login and if an attacker has bro-
ken root on the unsecure machine he can utilize that port to use your keys to gain access to any other machine that your keys unlock.
We recommend that you use SSH in combination with Kerberos whenever possible for staff logins. SSH can be compiled with Kerberos support.
This reduces your reliance on potentially exposable SSH keys while at the same time protecting passwords via Kerberos. SSH keys should only
be used for automated tasks from secure machines (something that Kerberos is unsuited to). We also recommend that you either turn off key-
forwarding in the SSH configuration, or that you make use of the from=IP/DOMAIN option that SSH allows in its authorized_keys file to make
the key only usable to entities logging in from specific machines.
chflags(1), find(1), md5(1), netstat(1), openssl(1), ssh(1), xdm(1) (ports/x11/xorg-clients), group(5), ttys(5), accton(8), init(8), sshd(8),
sysctl(8), syslogd(8), vipw(8)
The security manual page was originally written by Matthew Dillon and first appeared in FreeBSD 3.1, December 1998.
December 25, 2013 BSD