UMODEM(4) BSD Kernel Interfaces Manual UMODEM(4)NAME
umodem -- USB modem support
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb
device ucom
device umodem
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
umodem_load="YES"
DESCRIPTION
The umodem driver provides support for USB modems in the Communication Device Class using the Abstract Control Model. These modems are basi-
cally standard serial line modems, but they are accessed via USB instead. They support a regular AT command set. The commands can either be
multiplexed with the data stream or handled through separate pipes. In the latter case the AT commands have to be given on a device separate
from the data device.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
Devices supported by the umodem driver include:
o 3Com 5605
o Curitel PC5740 Wireless Modem
o Kyocera AH-K3001V Mobile Phone(WILLCOM)
o Kyocera WX320K Mobile Phone(WILLCOM)
o Metricom Ricochet GS USB wireless modem
o Sierra MC5720 Wireless Modem
o Yamaha Broadband Wireless Router RTW65b
o ELSA MicroLink 56k USB modem
o Sony Ericsson W810i phone
o Sonim XP5300 Force
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The umodem driver appeared in NetBSD 1.5. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
BUGS
Only modems with multiplexed commands and data are supported at the moment.
BSD August 6, 2012 BSD
Check Out this Related Man Page
UMODEM(4) BSD Kernel Interfaces Manual UMODEM(4)NAME
umodem -- USB modem support
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device umodem
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
umodem_load="YES"
DESCRIPTION
The umodem driver provides support for USB modems in the Communication Device Class using the Abstract Control Model. These modems are basi-
cally standard serial line modems, but they are accessed via USB instead. They support a regular AT command set. The commands can either be
multiplexed with the data stream or handled through separate pipes. In the latter case the AT commands have to be given on a device separate
from the data device.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
Devices supported by the umodem driver include:
o 3Com 5605
o Curitel PC5740 Wireless Modem
o Kyocera AH-K3001V Mobile Phone(WILLCOM)
o Kyocera WX320K Mobile Phone(WILLCOM)
o Metricom Ricochet GS USB wireless modem
o Sierra MC5720 Wireless Modem
o Yamaha Broadband Wireless Router RTW65b
o ELSA MicroLink 56k USB modem
o Sony Ericsson W810i phone
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The umodem driver appeared in NetBSD 1.5. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
BUGS
Only modems with multiplexed commands and data are supported at the moment.
BSD November 22, 2006 BSD
At the moment, I have three computers at home. I want to use boardband for my three computers. But I don't want to use network at home. I have been looking for a product which call OriNoCo USB Cilent. How do I connect to the internet with my computer??
If I post this in a wrong place, please... (0 Replies)
hi guys i know a litter bit of sco openserver 5.0.6 I got my self a 5.0.7 version.
The problem is how do you install a usb modem?
The way i'm used to doit is by serial port , you know tty1A .
Please guys bear with me
Thanks a lot
Jose. (1 Reply)
I have a problem. I've gotten my 56k Diamond Supra Express Internal modem to connect in Linux Mandrake 6.5. However when it connects, it seems it doesn't realize it is 56k and has V.90 and K56Flex. It connects at the 33.6 protocol instead. Is there drivers out there or away to fix this, like... (1 Reply)
Hello There,
I can understand that this is a classic problem with linux that it does not support even the hardware external modems. I have recently tried a USR External USB v 92 Modem (Model USR 5636). It has got its own DSP @56 Mhz, flash ram of 256 KBs and a EEPROM for upgrading the firmware.... (1 Reply)
Hi,
I have USB Siemens Santis 100 ADSL modem.I need driver for this modem on Solaris 10.Please help me with some info.Platform is x86.Thanks. (2 Replies)
:o I need some help changing the configuration for a 56k Modem to a 28k modem on the server.
Any help on installing this will be greatly appreciated!! :o (3 Replies)
Hello There,
I just wanted to know if there is any possible configuration for setting up my external USR USB Modem in Solaris 9 (x86). Any help is definitely appreciated.
Thanks
Khurram Bashir (1 Reply)
Who know free driver for Single Point 56k modem for Linux....
On www.conexant.com they say that there are only trail versions on 14.5 kbps.... or you should pay 19.45$ . If you know where I can download free full version .. please share with me. (1 Reply)
hi
I have two internal modems connected in my system.
For these two lines i have connected two separate telephone lines.
When i try to call from one modem through the telephone line i get connect message. when i try to call from the other telephone line connected to another modem i did not... (3 Replies)
I am having trouble connecting to the internet.
Details:
OpenSuse 11.1, Cable Modem, connected to Linksys Wireless N Router, hard line from router to ethernet port on my computer.
I checked network settings in YAST2, my ethernet is showing not connected. I have it set to start at boot, and... (4 Replies)
Hello All,
mgetty Version: 1.1.36
OS: OpenSuSE 13.1 (armv7l)
Modem: Zoom 56K USB Modem Model 3095
So I've been playing with mgetty for weeks now testing dialing into the USB modem from another PC using the same modem and connecting
using minicom (*minicom ---dials to---> mgetty). I had... (3 Replies)
Hello All,
So I have been running into an issue with a USB Modem where if someone ends their dialin connection abruptly from the other side the modem gets stuck
and I found that the only way to fix it is to either unplug the USB Modem and plug it back in, or just reboot. I'd rather not reboot... (5 Replies)