PCIC(4) BSD Kernel Interfaces Manual PCIC(4)NAME
pcic -- PC Card bridge driver
SYNOPSIS
device pcic
device pccard
DESCRIPTION
The pcic driver provides support for older ISA and non-Yenta PCI PC Card bridges. The pcic driver supports most ExCA devices attached to the
ISA bus or PCI devices that do not conform to the Yenta specification.
The following ISA devices, or true clones, are supported in the current code.
Intel i82365SL Step A
Intel i82365SL Step B
Intel i82365SL Step C Intel's original 16-bit PC Card controller.
Intel i82365SL-DF Intel's last version of this device. 3.3V support was added.
VLSI 82C146 An older VLSI part with some issues on some machines.
Cirrus Logic PD-6710
Cirrus Logic PD-6720
Cirrus Logic PD-6722 Cirrus Logic's pcic controller. Compatible with the i82365SL Step C with the addition of a different 3.3V control.
Ricoh RF5C296
Ricoh RF5C396 Ricoh's PC Card bridge chips. These are compatible with the i82365SL Step C, but with yet another different 3.3V con-
trol.
Vadem 365
Vadem 465 Compatible with i82365SL Step C.
Vadem 468
Vadem 469 Like the earlier Vadem models, but with Vadem's own, incompatible, 3.3V control system.
IBM PCIC IBM clone of the original i82365SL part, with its own ID register value. Has no 3.3V ability.
Many other vendors made parts in this arena, but most of them were compatible with one of the above chipsets.
The following PCI pcmcia bridges are supported:
Cirrus Logic PD6729
Cirrus Logic PD6730
O2micro OZ6729
O2micro OZ6730
BUGS
This does not work at all at the moment.
BSD July 9, 2002 BSD
Check Out this Related Man Page
PCIC(4) BSD Kernel Interfaces Manual PCIC(4)NAME
pcic -- PC Card bridge driver
SYNOPSIS
device pcic
device pccard
DESCRIPTION
The pcic driver provides support for older ISA and non-Yenta PCI PC Card bridges. The pcic driver supports most ExCA devices attached to the
ISA bus or PCI devices that do not conform to the Yenta specification.
The following ISA devices, or true clones, are supported in the current code.
Intel i82365SL Step A
Intel i82365SL Step B
Intel i82365SL Step C Intel's original 16-bit PC Card controller.
Intel i82365SL-DF Intel's last version of this device. 3.3V support was added.
VLSI 82C146 An older VLSI part with some issues on some machines.
Cirrus Logic PD-6710
Cirrus Logic PD-6720
Cirrus Logic PD-6722 Cirrus Logic's pcic controller. Compatible with the i82365SL Step C with the addition of a different 3.3V control.
Ricoh RF5C296
Ricoh RF5C396 Ricoh's PC Card bridge chips. These are compatible with the i82365SL Step C, but with yet another different 3.3V con-
trol.
Vadem 365
Vadem 465 Compatible with i82365SL Step C.
Vadem 468
Vadem 469 Like the earlier Vadem models, but with Vadem's own, incompatible, 3.3V control system.
IBM PCIC IBM clone of the original i82365SL part, with its own ID register value. Has no 3.3V ability.
Many other vendors made parts in this arena, but most of them were compatible with one of the above chipsets.
The following PCI pcmcia bridges are supported:
Cirrus Logic PD6729
Cirrus Logic PD6730
O2micro OZ6729
O2micro OZ6730
BUGS
This does not work at all at the moment.
BSD July 9, 2002 BSD
Hello !!!
I´m really new at Unix and have to write a script to copy some files from some locations to another one.
I need to be sure that each file has finished copied before starting to copy the other one. I believe unix returns the control to a script before the command really ends.
my... (14 Replies)
Hi Everyone,
Each time I do update the crontab, it gets reset after exiting from the telnet session. I'm using Solaris 2.8
So it goes like this:
Step 1: Login as root, from a telnet session
Step 2: Crontab -e (I make modification)
Step 3: Save and exit
Step 4: Type crontab -l , changes... (4 Replies)
I am a newbie to shell programming. Can someone help me with the following ?
Shell script that accomplishes the following -
# Step 1 List all files in the directory
# Step 2 Loop through each filename say a.htm and MD5 hash the filename to say b.htm
# Step 3 copy a.htm to b.htm
# Step 4... (1 Reply)
Hi All,
How can I script the following logic?
Step 1: Check if the file xyz.txt exists under direcotry test and if the size of the file xyz.txt is greater than 32MB.
Step 2: If the above conditions are true(file exists and size >32 MB), then step 3, otherwise step 4 (file does not exist or... (2 Replies)
Scenario:
Step 1. I'm logging into AIX server using user id called user1
Step 2. I'm traversing to home directory of user2
Note: This user2's home directory has the permissions drwxr-s---
Step 3. I'm issuing command pwd there. I'm getting the expected output.
Step 4. I'm issuing the... (3 Replies)
Dear All,
Pleae help me guiding a way to create a logic where when someone try to run a script manually, some general instruction should be displayed first, if user agrees all those instruction and further wants to execute the script he/she should type "YES". After enterning "YES" than script... (7 Replies)
Hi,
Pls check that '|' and '+' present in Step-1 are not copied to log file in Step-3.
Pls suggest how to get the exact output from Step-1 (i.e. with out losing '|' and '+') in to a log file
~Thanks
Step-1: Execute command
> mysql -utest -ptest -htesthost testdb -e "select * from... (3 Replies)
Hi,
I need to run start_load function for two tables.
Step 1: if HMAX_TBL_ID and GMAX_TBLI_D are same for tab_name1 then echo message "all table ids are processed"
Step 2: go back and call start_load for tab_name2 and check if table id are same for table 2 too.
Please let me know how to... (5 Replies)
Hello,
Following parts need to be replaced in a frame as suggested by IBM
1. Flexible Cable
2. Service Processor Card
Would these faulty parts impact all lpars which are there in this frame?
Best regards,
Vishal (5 Replies)
Hi All,
Can any one Explain Me Step by Step installing SCO 5.0.7v in ESXi 6.0 ??
When i was trying to install its is not booting into operating systems !!
showing an error no operating systems in media !!
Thanks in Advance!! Please take some time in helping me !!
Kanthi Kiran K (3 Replies)