IICSMB(4) BSD Kernel Interfaces Manual IICSMB(4)NAME
iicsmb -- I2C to SMB bridge
SYNOPSIS
device iicsmb
For one or more smbus busses:
device smbus
DESCRIPTION
The iicsmb driver supports SMB commands over iicbus(4) for the smbus(4) system.
SEE ALSO smbus(4)HISTORY
The iicsmb manual page first appeared in FreeBSD 3.0.
AUTHORS
This manual page was written by Nicolas Souchu.
BSD August 10, 1998 BSD
Check Out this Related Man Page
SMBUS(4) BSD Kernel Interfaces Manual SMBUS(4)NAME
smbus -- System Management Bus
SYNOPSIS
device smbus
device iicsmb
device bktr
DESCRIPTION
The smbus system provides a uniform, modular and architecture-independent system for the implementation of drivers to control various SMB
devices and to utilize different SMB controllers (I2C, PIIX4, Brooktree848, vm86...).
System Management Bus
The System Management Bus is a two-wire interface through which simple power-related chips can communicate with rest of the system. It uses
I2C as its backbone (see iicbus(4)).
A system using SMB passes messages to and from devices instead of tripping individual control lines.
With the SMBus, a device can provide manufacturer information, tell the system what its model/part number is, save its state for a suspend
event, report different types of errors, accept control parameters, and return its status.
The SMBus may share the same host device and physical bus as ACCESS bus components provided that an appropriate electrical bridge is provided
between the internal SMB devices and external ACCESS bus devices.
SEE ALSO bktr(4), iicbus(4), iicsmb(4), smb(4)
The SMBus specification, http://www.smbus.org/specs/.
HISTORY
The smbus manual page first appeared in FreeBSD 3.0.
AUTHORS
This manual page was written by Nicolas Souchu.
BSD August 10, 1998 BSD
Introduction
Originally, we only had one shell on unix. When ran a command, the shell would attempt to invoke one of the exec() system calls on it. It the command was an executable, the exec would succeed and the command would run. If the exec() failed, the shell would not give up, instead it... (3 Replies)
FreeBSD Kernel Internals, Dr. Marshall Kirk McKusick
nwbqBdghh6E
The first hour of Marshall Kirk McKusick's course on FreeBSD kernel internals based on his book, The Design and Implementation of the FreeBSD Operating System. (0 Replies)
Introduction
I have seen some misinformation regarding Unix file permissions. I will try to set the record straight. Take a look at this example of some output from ls:
$ ls -ld /usr/bin /usr/bin/cat
drwxrwxr-x 3 root bin 8704 Sep 23 2004 /usr/bin
-r-xr-xr-x 1 bin bin ... (6 Replies)
Suppose I have a main() function with only one malloc statement allocating say some 1 gb memory. Also say my system has 1 gb of ram.
main()
{
malloc(1gb)
return(0)
}
The program above exits without freeing the memory.
In this case will the 1 gb of heap memory be returned... (9 Replies)
I see lot of ad-hoc shell scripts in our servers which don't have a shebang at the beginning .
Does this mean that it will run on any shell ?
Is it a good practice to create scripts (even ad-hoc ones) without shebang ? (16 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
A shout out to Scott who gave me a helping hand to turn a simple sample Vue.js app I wrote yesterday into a Vue.js component:
Vue.component("unix-time", {
template: `<div class="time">{{unixtime}}</div>`,
data() {
return {
unixtime: ""
};
},
methods: {
... (1 Reply)
i read here that linux provides no way to determine when a directory was created.
https://www.unix.com/shell-programming-and-scripting/157874-creation-date-directory.htmlI have a directory /home/andy/scripts that had a README file in it.
That file says
I put the script in that directory and... (3 Replies)
Hello.
I can use any particular (stupid or not) format when using bash date command.
Example :
~> date --date "now" '+%Y-%m-%d %H!%M!%S'
2019-06-03 12!55!33or
~> date --date "now" '+%Y£%m£%d %H¤%M¤%S'
2019£06£03 12¤57¤36
or
~> date --date "now" '+%Y-%m-%d %H-%M-%S'
2019-06-03 12-58-51
... (4 Replies)
Morning All
So, I am starting looking into the world of UNIX for a new job (luckily not my primary function!) and I am looking to get stared. Like anything I seem to learn best by trying things out first in an environment but I have a key question:
Currently I use Oracle VirtualBox, can... (8 Replies)
I've installed Slack 14.2 on /dev/sda1 (/dev/sda2 is swap) and FreeBSD 12 on /dev/sda3 and lilo is the boot manager.
FreeBSD slices are as follows;
/ on /dev/ada0S3a, swap on /dev/ada0s3e, /var on /dev/ada0s3b, /tmp on /dev/ada0s3d and /usr on /dev/ada0s3f.
I hesitate to install Solaris 10... (2 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)