if_sge(4) [freebsd man page]
SGE(4) BSD Kernel Interfaces Manual SGE(4) NAME
sge -- Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device miibus device sge Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_sge_load="YES" DESCRIPTION
The sge device driver provides support for SiS190 Fast Ethernet controllers and SiS191 Fast/Gigabit Ethernet controllers. All LOMs supported by the sge driver have TCP/UDP/IP checksum offload for transmit and receive, TCP segmentation offload (TSO), hardware VLAN tag stripping/insertion features. Due to lack of documentation Wake On Lan (WOL), Jumbo frame and an interrupt moderation mechanism are not supported yet. The sge driver supports the following media types: autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to rc.conf(5). 10baseT/UTP Set 10Mbps operation. 100baseTX Set 100Mbps (Fast Ethernet) operation. 1000baseTX Set 1000baseTX operation over twisted pair. The sge driver supports the following media options: full-duplex Force full duplex operation. half-duplex Force half duplex operation. For more information on configuring this device, see ifconfig(8). HARDWARE
The sge device driver provides support for the following Ethernet controllers: o SiS190 Fast Ethernet controller o SiS191 Fast/Gigabit Ethernet controller SEE ALSO
altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), rgephy(4), vlan(4), ifconfig(8) HISTORY
The sge driver was written by Alexander Pohoyda <alexander.pohoyda@gmx.net>. And enhanced by Nikolay Denev <ndenev@gmail.com>. It first appeared in FreeBSD 8.1. BSD
January 16, 2011 BSD
Check Out this Related Man Page
SGE(4) BSD Kernel Interfaces Manual SGE(4) NAME
sge -- Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device miibus device sge Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_sge="YES" DESCRIPTION
The sge device driver provides support for SiS190 Fast Ethernet controllers and SiS191 Fast/Gigabit Ethernet controllers. All LOMs supported by the sge driver have TCP/UDP/IP checksum offload for transmit and receive, TCP segmentation offload (TSO), hardware VLAN tag stripping/insertion features. Due to lack of documentation Wake On Lan (WOL), Jumbo frame and an interrupt moderation mechanism are not supported yet. The sge driver supports the following media types: autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to rc.conf(5). 10baseT/UTP Set 10Mbps operation. 100baseTX Set 100Mbps (Fast Ethernet) operation. 1000baseTX Set 1000baseTX operation over twisted pair. The sge driver supports the following media options: full-duplex Force full duplex operation. half-duplex Force half duplex operation. For more information on configuring this device, see ifconfig(8). HARDWARE
The sge device driver provides support for the following Ethernet controllers: o SiS190 Fast Ethernet controller o SiS191 Fast/Gigabit Ethernet controller SEE ALSO
altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), rgephy(4), vlan(4), ifconfig(8) HISTORY
The sge driver was written by Alexander Pohoyda <alexander.pohoyda@gmx.net>. And enhanced by Nikolay Denev <ndenev@gmail.com>. It first appeared in FreeBSD 8.1. BSD
January 16, 2011 BSD