if_qlxge(4) [freebsd man page]
QLXGE(4) BSD Kernel Interfaces Manual QLXGE(4) NAME
qlxge -- QLogic 8100 Series 10 Gigabit Ethernet Adapter Driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device qlxge To load the driver as a module at boot time, place the following line in loader.conf(5): if_qlxge_load="YES" DESCRIPTION
The qlxge driver supports IPv4 checksum offload, TCP and UDP checksum offload for both IPv4 and IPv6, Large Segment Offload for both IPv4 and IPv6, Jumbo frames, VLAN Tag, and Receive Side scaling. For further hardware information, see http://www.qlogic.com/. HARDWARE
The qlxge driver supports 10 Gigabit Ethernet & CNA Adapter based on the following chipsets: o QLogic 8100 series SUPPORT
For support questions please contact your QLogic approved reseller or QLogic Technical Support at http://support.qlogic.com, or by E-mail at <support@qlogic.com>. SEE ALSO
altq(4), arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY
The qlxge device driver first appeared in FreeBSD 10.0. AUTHORS
The qlxge driver was written by David C Somayajulu at QLogic Corporation. BSD
June 21, 2013 BSD
Check Out this Related Man Page
QLXGBE(4) BSD Kernel Interfaces Manual QLXGBE(4) NAME
qlxgbe -- QLogic 10 Gigabit Ethernet & CNA Adapter Driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device qlxgbe To load the driver as a module at boot time, place the following line in loader.conf(5): if_qlxgbe_load="YES" DESCRIPTION
The qlxgbe driver supports IPv4 checksum offload, TCP and UDP checksum offload for both IPv4 and IPv6, Large Segment Offload for both IPv4 and IPv6, Jumbo frames, VLAN Tag, and Receive Side scaling. For further hardware information, see http://www.qlogic.com/. HARDWARE
The qlxgbe driver supports 10 Gigabit Ethernet & CNA Adapter based on the following chipsets: o QLogic 8300 series SUPPORT
For support questions please contact your QLogic approved reseller or QLogic Technical Support at http://support.qlogic.com, or by E-mail at <support@qlogic.com>. SEE ALSO
altq(4), arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY
The qlxgbe device driver first appeared in FreeBSD 10.0. AUTHORS
The qlxgbe driver was written by David C Somayajulu at QLogic Corporation. BSD
April 1, 2013 BSD