# fixmul(3alleg4) [freebsd man page]

fixmul(3alleg4) Allegro manual fixmul(3alleg4)NAME

fixmul - Multiplies two fixed point values together. Allegro game programming library.SYNOPSIS

#include <allegro.h> fixed fixmul(fixed x, fixed y);DESCRIPTION

A fixed point value can be multiplied or divided by an integer with the normal `*' and `/' operators. To multiply two fixed point values, though, you must use this function. If an overflow occurs, `errno' will be set and the maximum possible value will be returned, but `errno' is not cleared if the operation is successful. This means that if you are going to test for overflow you should set `errno=0' before calling fixmul(). Example: fixed result; /* This will put 30000 into `result'. */ result = fixmul(itofix(10), itofix(3000)); /* But this overflows, and sets `errno'. */ result = fixmul(itofix(100), itofix(3000)); ASSERT(!errno);RETURN VALUE

Returns the clamped result of multiplying `x' by `y', setting `errno' to ERANGE if there was an overflow.SEE ALSO

fixadd(3alleg4), fixsub(3alleg4), fixdiv(3alleg4), ex3buf(3alleg4), excustom(3alleg4), exfixed(3alleg4), exspline(3alleg4), exs- tars(3alleg4), exupdate(3alleg4)Allegroversion 4.4.2 fixmul(3alleg4)

## Check Out this Related Man Page

exspline(3alleg4) Allegro manual exspline(3alleg4)NAME

exspline - Constructing smooth movement paths from spline curves. Allegro game programming library.SYNOPSIS

#include <allegro.h> Example exsplineDESCRIPTION

This program demonstrates the use of spline curves to create smooth paths connecting a number of node points. This can be useful for con- structing realistic motion and animations. The technique is to connect the series of guide points p1..p(n) with spline curves from p1-p2, p2-p3, etc. Each spline must pass though both of its guide points, so they must be used as the first and fourth of the spline control points. The fun bit is coming up with sensible values for the second and third spline control points, such that the spline segments will have equal gradients where they meet. I came up with the following solution: For each guide point p(n), calculate the desired tangent to the curve at that point. I took this to be the vector p(n-1) -> p(n+1), which can easily be calculated with the inverse tangent function, and gives decent looking results. One implication of this is that two dummy guide points are needed at each end of the curve, which are used in the tangent calculations but not connected to the set of splines. Having got these tangents, it becomes fairly easy to calculate the spline control points. For a spline between guide points p(a) and p(b), the second control point should lie along the positive tangent from p(a), and the third control point should lie along the negative tangent from p(b). How far they are placed along these tangents controls the shape of the curve: I found that applying a 'curviness' scaling factor to the distance between p(a) and p(b) works well. One thing to note about splines is that the generated points are not all equidistant. Instead they tend to bunch up nearer to the ends of the spline, which means you will need to apply some fudges to get an object to move at a constant speed. On the other hand, in situations where the curve has a noticeable change of direction at each guide point, the effect can be quite nice because it makes the object slow down for the curve.SEE ALSO

END_OF_MAIN(3alleg4), SCREEN_W(3alleg4), acquire_screen(3alleg4), alert(3alleg4), allegro_error(3alleg4), allegro_init(3alleg4), alle- gro_message(3alleg4), calc_spline(3alleg4), circlefill(3alleg4), clear_keybuf(3alleg4), clear_to_color(3alleg4), desktop_palette(3alleg4), fixatan2(3alleg4), fixcos(3alleg4), fixed(3alleg4), fixmul(3alleg4), fixsin(3alleg4), fixsqrt(3alleg4), fixtof(3alleg4), fixtoi(3alleg4), font(3alleg4), ftofix(3alleg4), install_keyboard(3alleg4), install_mouse(3alleg4), install_timer(3alleg4), itofix(3alleg4), key(3alleg4), keypressed(3alleg4), line(3alleg4), makecol(3alleg4), mouse_b(3alleg4), mouse_x(3alleg4), mouse_y(3alleg4), palette_color(3alleg4), poll_mouse(3alleg4), readkey(3alleg4), release_screen(3alleg4), screen(3alleg4), set_gfx_mode(3alleg4), set_palette(3alleg4), show_mouse(3alleg4), spline(3alleg4), textout_centre_ex(3alleg4), textprintf_centre_ex(3alleg4), textprintf_ex(3alleg4), vsync(3alleg4), xor_mode(3alleg4)Allegro version 4.4.2exspline(3alleg4)