DEVSTAT(3) BSD Library Functions Manual DEVSTAT(3)
NAME
devstat, devstat_getnumdevs, devstat_getgeneration, devstat_getversion, devstat_checkversion, devstat_getdevs, devstat_selectdevs,
devstat_buildmatch, devstat_compute_statistics, devstat_compute_etime -- device statistics utility library
LIBRARY
Device Statistics Library (libdevstat, -ldevstat)
SYNOPSIS
#include <devstat.h>
int
devstat_getnumdevs(kvm_t *kd);
long
devstat_getgeneration(kvm_t *kd);
int
devstat_getversion(kvm_t *kd);
int
devstat_checkversion(kvm_t *kd);
int
devstat_getdevs(kvm_t *kd, struct statinfo *stats);
int
devstat_selectdevs(struct device_selection **dev_select, int *num_selected, int *num_selections, long *select_generation,
long current_generation, struct devstat *devices, int numdevs, struct devstat_match *matches, int num_matches, char **dev_selections,
int num_dev_selections, devstat_select_mode select_mode, int maxshowdevs, int perf_select);
int
devstat_buildmatch(char *match_str, struct devstat_match **matches, int *num_matches);
int
devstat_compute_statistics(struct devstat *current, struct devstat *previous, long double etime, ...);
long double
devstat_compute_etime(struct bintime *cur_time, struct bintime *prev_time);
DESCRIPTION
The devstat library is a library of helper functions for dealing with the kernel devstat(9) interface, which is accessible to users via
sysctl(3) and kvm(3). All functions that take a kvm_t * as first argument can be passed NULL instead of a kvm handle as this argument, which
causes the data to be read via sysctl(3). Otherwise, it is read via kvm(3) using the supplied handle. The devstat_checkversion() function
should be called with each kvm handle that is going to be used (or with NULL if sysctl(3) is going to be used).
The devstat_getnumdevs() function returns the number of devices registered with the devstat subsystem in the kernel.
The devstat_getgeneration() function returns the current generation of the devstat list of devices in the kernel.
The devstat_getversion() function returns the current kernel devstat version.
The devstat_checkversion() function checks the userland devstat version against the kernel devstat version. If the two are identical, it
returns zero. Otherwise, it prints an appropriate error in devstat_errbuf and returns -1.
The devstat_getdevs() function fetches the current list of devices and statistics into the supplied statinfo structure. The statinfo struc-
ture can be found in <devstat.h>:
struct statinfo {
long cp_time[CPUSTATES];
long tk_nin;
long tk_nout;
struct devinfo *dinfo;
long double snap_time;
};
The devstat_getdevs() function expects the statinfo structure to be allocated, and it also expects the dinfo subelement to be allocated and
zeroed prior to the first invocation of devstat_getdevs(). The dinfo subelement is used to store state between calls, and should not be mod-
ified after the first call to devstat_getdevs(). The dinfo subelement contains the following elements:
struct devinfo {
struct devstat *devices;
uint8_t *mem_ptr;
long generation;
int numdevs;
};
The kern.devstat.all sysctl(8) variable contains an array of devstat structures, but at the head of the array is the current devstat genera-
tion. The reason the generation is at the head of the buffer is so that userland software accessing the devstat statistics information can
atomically get both the statistics information and the corresponding generation number. If client software were forced to get the generation
number via a separate sysctl(8) variable (which is available for convenience), the list of devices could change between the time the client
gets the generation and the time the client gets the device list.
The mem_ptr subelement of the devinfo structure is a pointer to memory that is allocated, and resized if necessary, by devstat_getdevs().
The devices subelement of the devinfo structure is basically a pointer to the beginning of the array of devstat structures from the
kern.devstat.all sysctl(8) variable (or the corresponding values read via kvm(3)). The generation subelement of the devinfo structure con-
tains the corresponding generation number. The numdevs subelement of the devinfo structure contains the current number of devices registered
with the kernel devstat subsystem.
The devstat_selectdevs() function selects devices to display based upon a number of criteria:
specified devices
Specified devices are the first selection priority. These are generally devices specified by name by the user e.g. da0, da1, cd0.
match patterns
These are pattern matching expressions generated by devstat_buildmatch() from user input.
performance
If performance mode is enabled, devices will be sorted based on the bytes field in the device_selection structure passed in to
devstat_selectdevs(). The bytes value currently must be maintained by the user. In the future, this may be done for him in a
devstat library routine. If no devices have been selected by name or by pattern, the performance tracking code will select every
device in the system, and sort them by performance. If devices have been selected by name or pattern, the performance tracking code
will honor those selections and will only sort among the selected devices.
order in the devstat list
If the selection mode is set to DS_SELECT_ADD, and if there are still less than maxshowdevs devices selected, devstat_selectdevs()
will automatically select up to maxshowdevs devices.
The devstat_selectdevs() function performs selections in four different modes:
DS_SELECT_ADD In ``add'' mode, devstat_selectdevs() will select any unselected devices specified by name or matching pattern. It will
also select more devices, in devstat list order, until the number of selected devices is equal to maxshowdevs or until all
devices are selected.
DS_SELECT_ONLY In ``only'' mode, devstat_selectdevs() will clear all current selections, and will only select devices specified by name
or by matching pattern.
DS_SELECT_REMOVE In ``remove'' mode, devstat_selectdevs() will remove devices specified by name or by matching pattern. It will not select
any additional devices.
DS_SELECT_ADDONLY In ``add only'' mode, devstat_selectdevs() will select any unselected devices specified by name or matching pattern. In
this respect it is identical to ``add'' mode. It will not, however, select any devices other than those specified.
In all selection modes, devstat_selectdevs() will not select any more than maxshowdevs devices. One exception to this is when you are in
``top'' mode and no devices have been selected. In this case, devstat_selectdevs() will select every device in the system. Client programs
must pay attention to selection order when deciding whether to pay attention to a particular device. This may be the wrong behavior, and
probably requires additional thought.
The devstat_selectdevs() function handles allocation and resizing of the dev_select structure passed in by the client. The
devstat_selectdevs() function uses the numdevs and current_generation fields to track the current devstat generation and number of devices.
If num_selections is not the same as numdevs or if select_generation is not the same as current_generation, devstat_selectdevs() will resize
the selection list as necessary, and re-initialize the selection array.
The devstat_buildmatch() function takes a comma separated match string and compiles it into a devstat_match structure that is understood by
devstat_selectdevs(). Match strings have the following format:
device,type,if
The devstat_buildmatch() function takes care of allocating and reallocating the match list as necessary. Currently known match types
include:
device type:
da Direct Access devices
sa Sequential Access devices
printer Printers
proc Processor devices
worm Write Once Read Multiple devices
cd CD devices
scanner Scanner devices
optical Optical Memory devices
changer Medium Changer devices
comm Communication devices
array Storage Array devices
enclosure Enclosure Services devices
floppy Floppy devices
interface:
IDE Integrated Drive Electronics devices
SCSI Small Computer System Interface devices
other Any other device interface
passthrough:
pass Passthrough devices
The devstat_compute_statistics() function provides complete statistics calculation. There are four arguments for which values must be sup-
plied: current, previous, etime, and the terminating argument for the varargs list, DSM_NONE. For most applications, the user will want to
supply valid devstat structures for both current and previous. In some instances, for instance when calculating statistics since system
boot, the user may pass in a NULL pointer for the previous argument. In that case, devstat_compute_statistics() will use the total stats in
the current structure to calculate statistics over etime. For each statistics to be calculated, the user should supply the proper enumerated
type (listed below), and a variable of the indicated type. All statistics are either integer values, for which a uint64_t is used, or float-
ing point, for which a long double is used. The statistics that may be calculated are:
DSM_NONE type: N/A
This must be the last argument passed to devstat_compute_statistics(). It is an argument list terminator.
DSM_TOTAL_BYTES type: uint64_t *
The total number of bytes transferred between the acquisition of previous and current.
DSM_TOTAL_BYTES_READ
DSM_TOTAL_BYTES_WRITE
DSM_TOTAL_BYTES_FREE type: uint64_t *
The total number of bytes in transactions of the specified type between the acquisition of previous and
current.
DSM_TOTAL_TRANSFERS type: uint64_t *
The total number of transfers between the acquisition of previous and current.
DSM_TOTAL_TRANSFERS_OTHER
DSM_TOTAL_TRANSFERS_READ
DSM_TOTAL_TRANSFERS_WRITE
DSM_TOTAL_TRANSFERS_FREE type: uint64_t *
The total number of transactions of the specified type between the acquisition of previous and current.
DSM_TOTAL_DURATION type: long double *
The total duration of transactions, in seconds, between the acquisition of previous and current.
DSM_TOTAL_DURATION_OTHER
DSM_TOTAL_DURATION_READ
DSM_TOTAL_DURATION_WRITE
DSM_TOTAL_DURATION_FREE type: long double *
The total duration of transactions of the specified type between the acquisition of previous and current.
DSM_TOTAL_BUSY_TIME type: long double *
Total time the device had one or more transactions outstanding between the acquisition of previous and
current.
DSM_TOTAL_BLOCKS type: uint64_t *
The total number of blocks transferred between the acquisition of previous and current. This number is in
terms of the blocksize reported by the device. If no blocksize has been reported (i.e., the block size is
0), a default blocksize of 512 bytes will be used in the calculation.
DSM_TOTAL_BLOCKS_READ
DSM_TOTAL_BLOCKS_WRITE
DSM_TOTAL_BLOCKS_FREE type: uint64_t *
The total number of blocks of the specified type between the acquisition of previous and current. This num-
ber is in terms of the blocksize reported by the device. If no blocksize has been reported (i.e., the block
size is 0), a default blocksize of 512 bytes will be used in the calculation.
DSM_KB_PER_TRANSFER type: long double *
The average number of kilobytes per transfer between the acquisition of previous and current.
DSM_KB_PER_TRANSFER_READ
DSM_KB_PER_TRANSFER_WRITE
DSM_KB_PER_TRANSFER_FREE type: long double *
The average number of kilobytes in the specified type transaction between the acquisition of previous and
current.
DSM_TRANSFERS_PER_SECOND type: long double *
The average number of transfers per second between the acquisition of previous and current.
DSM_TRANSFERS_PER_SECOND_OTHER
DSM_TRANSFERS_PER_SECOND_READ
DSM_TRANSFERS_PER_SECOND_WRITE
DSM_TRANSFERS_PER_SECOND_FREE type: long double *
The average number of transactions of the specified type per second between the acquisition of previous and
current.
DSM_MB_PER_SECOND type: long double *
The average number of megabytes transferred per second between the acquisition of previous and current.
DSM_MB_PER_SECOND_READ
DSM_MB_PER_SECOND_WRITE
DSM_MB_PER_SECOND_FREE type: long double *
The average number of megabytes per second in the specified type of transaction between the acquisition of
previous and current.
DSM_BLOCKS_PER_SECOND type: long double *
The average number of blocks transferred per second between the acquisition of previous and current. This
number is in terms of the blocksize reported by the device. If no blocksize has been reported (i.e., the
block size is 0), a default blocksize of 512 bytes will be used in the calculation.
DSM_BLOCKS_PER_SECOND_READ
DSM_BLOCKS_PER_SECOND_WRITE
DSM_BLOCKS_PER_SECOND_FREE type: long double *
The average number of blocks per second in the specified type of transaction between the acquisition of
previous and current. This number is in terms of the blocksize reported by the device. If no blocksize has
been reported (i.e., the block size is 0), a default blocksize of 512 bytes will be used in the calculation.
DSM_MS_PER_TRANSACTION type: long double *
The average duration of transactions between the acquisition of previous and current.
DSM_MS_PER_TRANSACTION_OTHER
DSM_MS_PER_TRANSACTION_READ
DSM_MS_PER_TRANSACTION_WRITE
DSM_MS_PER_TRANSACTION_FREE type: long double *
The average duration of transactions of the specified type between the acquisition of previous and current.
DSM_BUSY_PCT type: long double *
The percentage of time the device had one or more transactions outstanding between the acquisition of
previous and current.
DSM_QUEUE_LENGTH type: uint64_t *
The number of not yet completed transactions at the time when current was acquired.
DSM_SKIP type: N/A
If you do not need a result from devstat_compute_statistics(), just put DSM_SKIP as first (type) parameter
and NULL as second parameter. This can be useful in scenarios where the statistics to be calculated are
determined at run time.
The devstat_compute_etime() function provides an easy way to find the difference in seconds between two bintime structures. This is most
commonly used in conjunction with the time recorded by the devstat_getdevs() function (in struct statinfo) each time it fetches the current
devstat list.
RETURN VALUES
The devstat_getnumdevs(), devstat_getgeneration(), and devstat_getversion() function return the indicated sysctl variable, or -1 if there is
an error fetching the variable.
The devstat_checkversion() function returns 0 if the kernel and userland devstat versions match. If they do not match, it returns -1.
The devstat_getdevs() and devstat_selectdevs() functions return -1 in case of an error, 0 if there is no error, and 1 if the device list or
selected devices have changed. A return value of 1 from devstat_getdevs() is usually a hint to re-run devstat_selectdevs() because the
device list has changed.
The devstat_buildmatch() function returns -1 for error, and 0 if there is no error.
The devstat_compute_etime() function returns the computed elapsed time.
The devstat_compute_statistics() function returns -1 for error, and 0 for success.
If an error is returned from one of the devstat library functions, the reason for the error is generally printed in the global string
devstat_errbuf which is DEVSTAT_ERRBUF_SIZE characters long.
SEE ALSO
systat(1), kvm(3), sysctl(3), iostat(8), rpc.rstatd(8), sysctl(8), vmstat(8), devstat(9)
HISTORY
The devstat statistics system first appeared in FreeBSD 3.0. The new interface (the functions prefixed with devstat_) first appeared in
FreeBSD 5.0.
AUTHORS
Kenneth Merry <ken@FreeBSD.org>
BUGS
There should probably be an interface to de-allocate memory allocated by devstat_getdevs(), devstat_selectdevs(), and devstat_buildmatch().
The devstat_selectdevs() function should probably not select more than maxshowdevs devices in ``top'' mode when no devices have been selected
previously.
There should probably be functions to perform the statistics buffer swapping that goes on in most of the clients of this library.
The statinfo and devinfo structures should probably be cleaned up and thought out a little more.
BSD
December 15, 2012 BSD