Functions(1x) AfterStep X11 window manager Functions(1x)
NAME
Functions - built in AfterStep functions
CONFIGURATION OPTIONS
be between 2147483647 and -2147483648; meaning they can also be negative.
DesktopEntry
FIXME: add proper description here.
Destroy [ "name" ]
Sends the XKillClient(3) to a window. Guaranteed to get rid of the window.
EndFunction
Terminates a Complex Function definition.
EndPopup
Terminates a Popup definition.
Exec "name" command [-options]
Specifies a sub process to initiate. The "name" is required for ease of parsing. The command is the command or application to be
invoked along with any desired-options.
ExecBrowser "name" URL
Open URL in web browser.
ExecEditor "name" filename
Open file in text editor.
ExecInTerm "name" command [-options]
Specifies a sub process to initiate. It is similar to Exec , though targeted at programs that need a terminal to run. The following
terminal emulators are tried in order: aterm, rxvt, eterm, xterm.
Focus
Moves the view or window as needed to make the selected window visible. Sets the keyboard focus to the selected window. Raises the
window if needed to make it visible. Warps the pointer into the selected window in focus-follows-mouse mode. Does not de-iconify.
This function is primarily handy when used with a module such as the WinList.
Folder " folder-name "
Defines a slide-out folder inside the current folder. The following button definitions will be placed inside of the subfolder, until
a *Wharf ~Folder line is encountered. See the EXAMPLES section below for an example. Folders may be nested.
This is a Wharf specific Function.
Fullscreen
Toggle window Fullscreen state. Will disregard any AvoidCover windows and will try to make window as big as the screen unless it's
hints set certain limitation on size. Window in Fullscreen mode cannot be Maximized.
Function "function_name"
There are also two situations where this might occur as well; as a function definition stanza, or in calling a previously defined
function decleration.
Function "function_name" built-in_file "action" [ argument ]
EndFunction
Specifies the definition of a complex function "function_name" , which can later be bound to a mouse button or key using "func-
tion_name" to recall this declaration. built-in_command specifies which command will be performed, taking its syntax from this list
of Built-In Commands/Functions. "action" specifies the action to take followed by any additional arguments needed by the
built-in_command . Menus can be specified by using the Popup command, as long as the menu was defined earlier in the configuration
file.
The trigger actions which are recognized are Immediate (can be shortened to "I"), Motion, Click, DoubleClick and TripleClick. Imme-
diate actions are executed as soon as the function is activated, even if a window has not been selected. If there are actions other
than immediate ones, afterstep will wait to see if the user is clicking, double-clicking, triple-clicking or dragging the mouse;
then will execute only the built-ins from the function definition whose trigger action matches the action performed by the user. The
clicking, double-clicking and triple-clicking concepts do not carry through to using keyboard shortcuts.
Two special functions exist: InitFunction and RestartFunction. The InitFunction will be called when afterstep is started for the
first time in any X session, and can be used to start modules and begin programs. The RestartFunction will be called when afterstep
is restarted. It can be used to re-start modules but probably should not be used to start programs. These two functions are defined
in the autoexec file.
When calling a previously defined Function or a Function from a key-stroke combination, Function is simply used as a built-in com-
mand using the previously defined "action" from the same function_name .
Function built-in_command "action" function_name
Refer to the feel.name files and below in EXAMPLES for examples.
GetHelp
Runs afterstepdoc script, that attempts to guess which web browser is available on the system, and then launches it to display HTML
documentation for AfterStep.
GoToBookmark ["name" window_bookmark ]
Focuses window specified by previously placed window_bookmark.
GotoDeskViewport Desk+Vx+Vy
Changes both current desk and viewport.
GotoPage x y
Moves the desktop view to page x y . The upper left page is (0,0), the upper right is (N,0), where N is one less than the current
number of horizontal pages specified in the DeskTopSize command detailed in the Pager(1) man page. The lower left page is (0,M), and
the lower right page is (N,M), where M is the desktop's vertical size as specified in the DeskTopSize command.
The GotoPage function should not be used in a pop-up menu.
Iconify [ "name" ] [ value ]
Iconifies a window if it is not already iconified, or de-iconifies it if it is already iconified. If the optional argument value is
positive, then only iconification will be allowed, and de-iconification will be inhibited. If the optional argument is negative,
only de-iconification will be allowed.
InstallBackground "name" filename
Copies specified file to ~/.afterstep/backgrounds/ directory, so that it will show up in the menu, to be used for Root background.
InstallColorscheme "name" filename
Copies specified file to ~/.afterstep/colorschemes/ directory, so that it will show up in the menu, to be used as color scheme.
InstallFeel "name" filename
Copies specified file to ~/.afterstep/feels/ directory, so that it will show up in the menu.
InstallFont "name" filename
Copies specified TTF file to ~/.afterstep/desktop/fonts/ directory, so that it could be used in look configuration.
InstallIcon "name" filename
Copies specified image file to ~/.afterstep/desktop/icons/ directory, so that it could be used in look and database configuration.
InstallLook "name" filename
Copies specified look file to ~/.afterstep/looks/ directory, so that it could be selected from the menu.
InstallThemeFile "name" filename
Copies specified theme file to ~/.afterstep/themes/ directory, so that it could be selected from the menu.
InstallTile "name" filename
Copies specified image file to ~/.afterstep/desktop/tiles/ directory, so that it could be used in look and database configuration.
KIPCsendMessageAll
Sends a signal to all KDE applications, refreshing their visual properties.
KillAllModulesByName
Kills AfterStep modules with a provided matching name.
KillModuleByName "name" modulename
Kill module with specified name.
LargeMiniPixmap pixmap
Specifies a given pixmap to display to the left of the menu item which invokes this menu, or in the title of this menu. Used in menu
entries instead of MiniPixmap when it is not desired to scale-down a pixmap image. Pixmap images are full-size. Opposite is Small-
MiniPixmap.
See Also: MiniPixmap, SmallMiniPixmap, MenuMiniPixmaps.
Lower [ "name" ]
Allows the user to lower a window.
MaxSwallow " window-name " command
Like Swallow , except the button will be resized to fit the application.
This is a Wharf specific Function.
MaxSwallowModule " window-name " command
Like MaxSwallow , except the command is an AfterStep module.
This is a Wharf specific Function.
Maximize [ "name" ] [ horizontal vertical ]
Causes the window to alternately switch from a full-screen size to its normal size. Specifying the optional arguments of horizontal
and vertical , control can be attained as to the percentage of the full screen that the new size of the window becomes. If horizon-
tal > 0, then the horizontal dimension of the window will be set to horizontal*screen_width/100. The vertical resizing is similar.
Values larger than 100 can be used with caution. The defaults for horizontal and vertical are 100s (ie, fullscreen).
MiniPixmap pixmap
Specifies a given pixmap to display to the left of the menu item which invokes this menu, or in the title of this menu. Default
pixmap size is 24x24 pixels; this size can be adjusted in Look via MiniPixmapSize.
See Also: MinipixmapSize, LargeMiniPixmap, SmallMiniPixmap, MenuMiniPixmaps.
Module ModuleName [ arguments ]
Specifies that ModuleName should be spawned.
Currently, many modules are included with afterstep . Wharf(1x) and Pager(1x) are two of the more popular ones. Wharf will normally
be spawned during initialization instead of in response to a mouse binding or menu action. Modules can be short lived transient pro-
grams, or, like Wharf, can be intended to remain for the duration of the X session. Modules will be terminated by afterstep prior to
restarts and quits, if possible.
Move [ "name" ]
Allows the user to move a window or iconified app.
Nop ""
Inserts a horizontal line (<HR> type html line) in a menu entry list.
Nop "name"
Inserts a name in the menu, stippled (disabled and grayed-out).
PasteSelection
This function allows for substitute of X clipboard copy-pasting if application is missing it.
PinMenu ["name"]
Pins menu on desktop.
PopUp "popup_name"
There are two situations where this might occur; as a popup menu stanza definition, or in calling a previously defined menu declara-
tion.
Popup "popup_name" built-in_command "name" [ argument ]
EndPopup
Specfies the definition of a complex menu popup "popup_name" , which can be bound to a mouse button or key using "popup_name" to
recall this declaration. built-in_command specifies which command will be performed, utilizing it's syntax from this list of
Built-In Commands/Functions. "name" specifies the name which will appear within the menu for the given item, and additionally any
arguments needed by the built-in_command . The Popup definition ends with the keyword EndPopup. Sub-menus can be created by calling
the Popup built-in within another Popup declaration, as long as that sub-menu was defined earlier in the configuration file.
Shortcut keys may be specified in the menu definition by preceding a character with an ampersand. The ampersand will not be dis-
played, but the character after it will be displayed at the right side of the same entry. and if the user presses the corresponding
key, then that item will be activated as if it had been clicked upon. Only alphanumeric characters may be used as shortcut keys. The
shift state of the keyboard is ignored when testing shortcut characters. Shortcut keys are not operative unless MENU_HOTKEYS was
defined when building AfterStep. If WINDOWLIST_HOTKETS was also defined, then hot keys are automatically added to the WindowList
when it is displayed. When calling a previously defined menu or a menu from a key-stroke combination, Popup is simply used as a
built-in command with the "name" referring to the previously defined Popup definitions name.
Popups can be bound to keys through the use of the key modifier. Popups can be operated without using the mouse by binding to keys,
and operating via the up arrow, down arrow, and enter keys. Refer to the feel.name files and below in EXAMPLES for examples.
PutOnBack
Moves the target window to the bottom of its layer, or down one layer if it is already at the bottom.
PutOnTop
Moves the target window to the top of its layer, or up one layer if it is already at the top.
QuickRestart look|feel|look+feel
Causes AfterStep to reload specified config.
Quit [ "name" ]
Exits afterstep , generally causing X to exit too.
Raise [ "name" ]
Allows the user to raise a window.
RaiseLower [ "name" ]
Alternately raises and lowers a window; i.e. if it's raised, the window will lower, and vice versa.
Refresh [ "name" ]
Causes all windows on the screen to re-draw themselves.
Resize [ "name" ]
Allows the user to resize a window.
Restart "name" WindowManagerName
Restarts X(1) with the given WindowManagerName . If WindowManagerName is afterstep , then this forces afterstep to reread all of its
configuration files and reinitiate the session. If WindowManagerName is not in the default search path, then the full path name
should be given.
RestartModuleByName
Restarts AfterStep modules with a provided matching name.
RestartModuleList
Restarts all AfterStep modules.
SET_FLAGS
Do not use. Reserved for use by AfterStep modules to set communication flags - identifying which messages module wishes to receive.
SET_MASK
Do not use. Reserved for use by AfterStep modules.
SET_NAME
Do not use. Reserved for use by AfterStep modules to identify themselves to AfterStep.
SaveWorkspace "name" file_name
Write list of presently running applications with its position and desktop number into specified file. You can run this file at a
later time as a shell script to restore state of the desktop. Note this does not work for many applications that does not provide
needed ICCCM properties on its windows.
Scroll horizontal vertical
Scrolls the desktop's view by horizontal pages in the x-direction, and vertical pages in the y-direction. Either or both entries may
be negative. Both horizontal and vertical values are expressed in percent of pages, so 100 would be one full page. Normally,
scrolling stops at the edge of the desktop. If the horizontal and vertical values are multiplied by 1000, then scrolling will wrap
around at the edge of the desktop.
The scroll function should not be called from pop-up menus.
Send_WindowList
This Function is used by modules to obtain list of open windows.
Set
FIXME: add proper description here.
SetLayer layer
Moves the target window to layer layer .
Shade [ "name" ]
Emulates the MacOS WindowShade feature. Once activated the window will become a titlebar only.
SignalReloadGTKRCFile
Forces all GTK apps to reload the gtkrc files.
Size width height
Sets the size of the associated button, overriding any other size consideration.
The Wharf button size depends on several things. The order of precedence is:
1) Size definition
2) MaxSwallow'd window size
3) WharfPixmap size
4) Use 64x64.
This is a Wharf specific Function.
SmallMiniPixmap pixmap
Specifies a given pixmap to display to the left of the menu item which invokes this menu, or in the title of this menu. Used in menu
entries instead of MiniPixmap; scales-down pixmap images to the smallest size. It is sized based-on the Menu font size plus eight
pixels; width is calculated to keep proportionality.
See Also: MiniPixmap, LargeMiniPixmap, MenuMiniPixmaps.
Stick [ "name" ]
Makes a window sticky (stays on screen when desks/views are switched) if it is not already sticky, or non-sticky if it is already
sticky.
StopModuleList
Stops all AfterStep modules.
Swallow " window-name " command
Causes Wharf to run command , capture the first window whose name or resource is window-name , and display it in the associated but-
ton. The application window will be shrunk to fit the size of the button.
This is a Wharf specific Function.
SwallowModule " window-name " command
Like Swallow , except the command is an AfterStep module.
This is a Wharf specific Function.
SwallowWindow "pattern" shell_command
will cause already opened window to be swallowed, while just Swallow will run application, if there are no windows matching pattern
TakeFrameShot "name" filename
Grabs screenshot of the client window including frame decorations and save it in specifyed files.
TakeScreenShot "name" filename
Grabs screenshot of the entire screen and save it in specifyed files.
TakeWindowShot "name" filename
Grabs screenshot of the client window excluding frame decorations and save it in specifyed files.
Test
Do not use. Internal function.
Title "name"
Insert a title line of heading name into a popup or menu.
ToggleLayer layer1 layer2
Specifies that if the window is in layer1 , it should be placed in layer2 . Otherwise, it is placed in layer1 . In either case, the
window will be placed on top of other windows in the target layer.
TogglePage [ "name" ]
Temporarily disables EdgeScroll . Edge scrolling can be re-enabled by calling this again.
Transient
Specifies that this button will not perform any action, will not be pushable, and will not have an associated balloon.
UNLOCK
Do not use. Internal function.
Wait app_name
This is intended to be used in afterstep functions only. It causes execution of a function to pause until a new window named
app_name appears. afterstep remains fully functional during a wait. This is particularly useful in the InitFunction and RestartFunc-
tion, if you are trying to start windows on specific desktops.
WarpBack [ "name" window_name ]
Same as ChangeWindowDown , but uniconifies any iconified windows as it focuses on them.
WarpFore [ "name" window_name ]
Same as ChangeWindowUp , but uniconifies any iconified windows as it focuses on them.
WindowList [ arg1 arg2 ]
Specifies the internal popup menu in which the titles of each open application are displayed, should be popped up. Selecting an item
from the list will cause the current desk to switch to the application's desk, and will raise it if it's behind other windows. If
the application is currently iconified, then it will be de-iconified normally.
Generally, if arg1 is an even number, then the windows will be listed using the window name (the name that shows up in the
title-bar); if arg1 is an odd number, then the window's icon name is used.
Specifically, if arg1 is 0, 1 or 2, then all windows on all desks will be shown. If arg1 is 2 or 3, then only windows on the current
desk will be shown. If arg1 is 4 or 5, then only windows on the desk number specified with arg2 , will be shown. Windows which have
WindowListSkip specified in their style will not be listed in the window list.
WindowsDesk new_desk [10000]
Moves the selected window to the desktop specified as new_desk . If second argument is set to 10000 then first is treated as rela-
tive desktop number.
3rd Berkeley Distribution AfterStep v.2.2.11 Functions(1x)