Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

sntp(1) [freebsd man page]

SNTP(1) 							Programmer's Manual							   SNTP(1)

NAME
sntp - standard SNTP program SYNOPSIS
sntp [-flag [value]]... [--opt-name [[=| ]value]]... All arguments must be options. DESCRIPTION
This manual page documents, briefly, the sntp command. sntp can be used as a SNTP client to query a NTP or SNTP server and either display the time or set the local system's time (given suitable privilege). It can be run as an interactive command or in a cron job. NTP is the Network Time Protocol (RFC 1305) and SNTP is the Simple Network Time Protocol (RFC 2030, which supersedes RFC 1769). Options sntp recognizes the following options: -v indicates that diagnostic messages for non-fatal errors and a limited amount of tracing should be written to standard error. Fatal ones always produce a diagnostic. This option should be set when there is a suspected problem with the server, network or the source. -V requests more and less comprehensible output, mainly for investigating problems with apparently inconsistent timestamps. This option should be set when the program fails with a message indicating that is the trouble. -W requests very verbose debugging output, and will interfere with the timing when writing to the terminal (because of line buffered output from C). Note that the times produced by this are the corrections needed, and not the error in the local clock. This option should be set only when debugging the source. -q indicates that it should query a daemon save file being maintained by it. This needs no privilege and will change neither the save file nor the clock. The default is that it should behave as a client, and the following options are then relevant: -r indicates that the system clock should be reset by settimeofday. Naturally, this will work only if the user has enough privilege. -a indicates that the system clock should be reset by adjtime. Naturally, this will work only if the user has enough privilege. The default is to write the estimated correct local date and time (i.e. not UTC) to the standard output in a format like '1996 Oct 15 20:17:25.123 + 4.567 +/- 0.089 secs', where the '+ 4.567 +/- 0.089 secs' indicates the estimated error in the time on the local system. -l lockfile sets the name of the lock file to ensure that there is only one copy of sntp running at once. The default is installation-depen- dent, but will usually be /etc/sntp.pid. -e minerr sets the maximum ignorable variation between the clocks to minerr. Acceptable values are from 0.001 to 1, and the default is 0.1 if a NTP host is is specified and 0.5 otherwise. -E maxerr sets the maximum value of various delays that are deemed acceptable to maxerr. Acceptable values are from 1 to 60, and the default is 5. It should sometimes be increased if there are problems with the network, NTP server or system clock, but take care. -P prompt sets the maximum clock change that will be made automatically to maxerr. Acceptable values are from 1 to 3600 or no, and the default is 30. If the program is being run interactively in ordinary client mode, and the system clock is to be changed, larger corrections will prompt the user for confirmation. Specifying no will disable this and the correction will be made regardless. -c count sets the maximum number of NTP packets required to count. Acceptable values are from 1 to 25 if a NTP host is specified and from 5 to 25 otherwise, and the default is 5. If the maximum isn't enough, the system needs a better consistency algorithm than this pro- gram uses. -d delay sets a rough limit on the total running time to delay seconds. Acceptable values are from 1 to 3600, and the default is 15 if a NTP host is specified and 300 otherwise. -4 force IPv4 DNS resolution. -6 force IPv6 DNS resolution. address(es) are the DNS names or IP numbers of hosts to use for the challenge and response protocol; if no names are given, the program waits for broadcasts. Polling a server is vastly more reliable than listening to broadcasts. Note that a single component numeric address is not allowed, to avoid ambiguities. If more than one name is give, they will be used in a round-robin fashion. Constraints: minerr must be less than maxerr which must be less than delay (or, if a NTP host is not specified delay/count), and count must be less than half of delay. In update mode, maxerr must be less than prompt. Note that none of the above values are closely linked to the limits described in the NTP protocol (RFC 1305). USAGE
The simplest use of this program is as an unprivileged command to check the current time and error in the local clock. For example: sntp ntpserver.somewhere With suitable privilege, it can be run as a command or in a cron job to reset the local clock from a reliable server, like the ntpdate and rdate commands. For example: sntp -a ntpserver.somewhere More information on how to use this utility is given in the README file in the distribution. In particular, this man page does not describe how to set it up as a server, which needs special care to avoid propagating misinformation. RETURN VALUE
When used as a client in non-daemon mode, the program returns a zero exit status for success, and a non-zero one otherwise. When used as a daemon (either client or server), it does not return except after a serious error. BUGS
The program implements the SNTP protocol, and does not provide all NTP facilities. In particular, it contains no checks against any form of spoofing. If this is a serious concern, some network security mechanism (like a firewall or even just tcpwrappers) should be installed. There are some errors, ambiguities and inconsistencies in the RFCs, and this code may not interwork with all other NTP implementations. Any unreasonable restrictions should be reported as bugs to whoever is responsible. It may be difficult to find out who that is. The program will stop as soon as it feels that things have got out of control. In client daemon mode, it will usually fail during an extended period of network or server inaccessibility or excessively slow performance, or when the local clock is reset by another process. It will then need restarting manually. Experienced system administrators can write a shell script, a cron job or put it in inittab, to do this automatically. The error cannot be estimated reliably with broadcast packets or for the drift in daemon mode (even with client-server packets), and the guess made by the program may be wrong (possibly even very wrong). If this is a problem, then setting the -c option to a larger value may help. Or it may not. AUTHOR
sntp was developed by N.M. Maclaren of the University of Cambridge Computing Service. OPTIONS
-4, --ipv4 Force IPv4 DNS name resolution. This option is a member of the ipv4 class of options. Force DNS resolution of following host names on the command line to the IPv4 namespace. -6, --ipv6 Force IPv6 DNS name resolution. This option is a member of the ipv4 class of options. Force DNS resolution of following host names on the command line to the IPv6 namespace. -u, --unprivport Use an unprivileged port. Use an unprivilegded UDP port for our queries. -v, --normalverbose Slightly verbose. This option must not appear in combination with any of the following options: extraverbose, megaverbose. Diagnostic messages for non-fatal errors and a limited amount of tracing should be written to standard error. Fatal ones always produce a diagnostic. This option should be set when there is a suspected problem with the server, network or the source. -V, --extraverbose Extra verbose. This option must not appear in combination with any of the following options: normalverbose, megaverbose. Produce more and less comprehensible output, mainly for investigating problems with apparently inconsistent timestamps. This option should be set when the program fails with a message indicating that is the trouble. -W, --megaverbose Mega verbose. This option must not appear in combination with any of the following options: normalverbose, extraverbose. Very verbose debugging output that will interfere with the timing when writing to the terminal (because of line buffered output from C). Note that the times produced by this are the corrections needed, and not the error in the local clock. This option should be set only when debugging the source. -r, --settimeofday Set (step) the time with settimeofday(). This option must not appear in combination with any of the following options: adjtime. -a, --adjtime Set (slew) the time with adjtime(). This option must not appear in combination with any of the following options: settimeofday. -?, --help Display usage information and exit. -!, --more-help Extended usage information passed thru pager. -> [rcfile], --save-opts[=rcfile] Save the option state to rcfile. The default is the last configuration file listed in the OPTION PRESETS section, below. -< rcfile, --load-opts=rcfile, --no-load-opts Load options from rcfile. The no-load-opts form will disable the loading of earlier RC/INI files. --no-load-opts is handled early, out of order. -v [{v|c|n}], --version[={v|c|n}] Output version of program and exit. The default mode is `v', a simple version. The `c' mode will print copyright information and `n' will print the full copyright notice. OPTION PRESETS
Any option that is not marked as not presettable may be preset by loading values from configuration ("RC" or ".INI") file(s) and values from environment variables named: SNTP_<option-name> or SNTP The environmental presets take precedence (are processed later than) the configuration files. The homerc files are "$HOME", and ".". If any of these are directories, then the file .ntprc is searched for within those directories. AUTHOR
ntp.org Please send bug reports to: http://bugs.ntp.org, bugs@ntp.org General Public Licence for the software known as MSNTP ------------------------------------------------------ (c) Copyright, N.M. Maclaren, 1996, 1997, 2000 (c) Copyright, University of Cambridge, 1996, 1997, 2000 Free use of MSNTP in source and binary forms is permitted, provided that this entire licence is duplicated in all copies, and that any documentation, announcements, and other materials related to use acknowledge that the software was developed by N.M. Maclaren (hereafter refered to as the Author) at the University of Cambridge. Neither the name of the Author nor the University of Cambridge may be used to endorse or promote products derived from this material without specific prior written permission. The Author and the University of Cambridge retain the copyright and all other legal rights to the software and make it available non-exclusively. All users must ensure that the software in all its derivations carries a copyright notice in the form: (c) Copyright N.M. Maclaren, (c) Copyright University of Cambridge. NO WARRANTY Because the MSNTP software is licensed free of charge, the Author and the University of Cambridge provide absolutely no warranty, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the MSNTP software is with you. Should MSNTP prove defective, you assume the cost of all necessary servicing or repair. In no event, unless required by law, will the Author or the University of Cambridge, or any other party who may modify and redistribute this software as permitted in accordance with the provisions below, be liable for damages for any losses whatsoever, including but not limited to lost profits, lost monies, lost or corrupted data, or other special, incidental or consequential losses that may arise out of the use or inability to use the MSNTP software. COPYING POLICY Permission is hereby granted for copying and distribution of copies of the MSNTP source and binary files, and of any part thereof, subject to the following licence conditions: 1. You may distribute MSNTP or components of MSNTP, with or without additions developed by you or by others. No charge, other than an "at-cost" distribution fee, may be charged for copies, derivations, or distributions of this material without the express written consent of the copyright holders. 2. You may also distribute MSNTP along with any other product for sale, provided that the cost of the bundled package is the same regardless of whether MSNTP is included or not, and provided that those interested only in MSNTP must be notified that it is a product freely available from the University of Cambridge. 3. If you distribute MSNTP software or parts of MSNTP, with or without additions developed by you or others, then you must either make available the source to all portions of the MSNTP system (exclusive of any additions made by you or by others) upon request, or instead you may notify anyone requesting source that it is freely available from the University of Cambridge. 4. You may not omit any of the copyright notices on either the source files, the executable files, or the documentation. 5. You may not omit transmission of this License agreement with whatever portions of MSNTP that are distributed. 6. Any users of this software must be notified that it is without warranty or guarantee of any nature, express or implied, nor is there any fitness for use represented. October 1996 April 1997 October 2000 This manual page was AutoGen-erated from the sntp option definitions. ( 4.2.4p8) 2009-12-08 SNTP(1)
Man Page